<repeatMark>

(repetition mark) – An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
Module
Attributes
class, copyof, corresp, dots.ges, dur, dur.ges, dur.metrical, dur.ppq, dur.real, dur.recip, endho, endid, endto, evaluate, extender, facs, follows, func, glyph.auth, glyph.name, glyph.num, glyph.uri, ho, label, layer, lendsym, lendsym.size, lform, lsegs, lstartsym, lstartsym.size, lwidth, n, next, part, partstaff, place, plist, precedes, prev, resp, sameas, staff, startho, startid, startto, synch, to, translit, tstamp, tstamp.ges, tstamp.real, tstamp2, tstamp2.ges, tstamp2.real, type, vgrp, vo, when, x, xml:base, xml:id, xml:lang, y
class(optional)Contains one or more URIs which denote classification terms that apply to the entity bearing this attribute. One or more values from data.URI, separated by spaces.
copyof(optional)Points to an element of which the current element is a copy. Value conforms to data.URI.
corresp(optional)Used to point to other elements that correspond to this one in a generic fashion. One or more values from data.URI, separated by spaces.
dots.ges(optional)Number of dots required for a gestural duration when different from that of the written duration. Value conforms to data.AUGMENTDOT.
dur(optional)When a duration cannot be represented as a single power-of-two value, multiple space-separated values that add up to the total duration may be used. One or more values from data.DURATION, separated by spaces.
dur.ges(optional)Records performed duration information that differs from the written duration. Value conforms to data.DURATION.GESTURAL.
dur.metrical(optional)Duration as a count of units provided in the time signature denominator. Value is a decimal number.
dur.ppq(optional)Duration recorded as pulses-per-quarter note, e.g., MIDI clicks or MusicXML divisions. Value is a positive integer, including 0.
dur.real(optional)Duration in seconds, e.g., 1.732. Value is a decimal number.
dur.recip(optional)Duration as an optionally dotted Humdrum **recip value. Value is a token.
endho(optional)Records the horizontal adjustment of a feature’s programmatically-determined end point. Value conforms to data.MEASUREMENTSIGNED.
endid(optional)Indicates the final element in a sequence of events to which the feature applies. Value conforms to data.URI.
endto(optional)Records a timestamp adjustment of a feature’s programmatically-determined end point. Value conforms to data.TSTAMPOFFSET.
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
extender(optional)Indicates the presence of an extension symbol, typically a line. Value conforms to data.BOOLEAN.
facs(optional)Points to one or more images, portions of an image, or surfaces which correspond to the current element. One or more values from data.URI, separated by spaces.
follows(optional)points to one or more events in a user-defined collection that are known to be predecessors of the current element. One or more values from data.URI, separated by spaces.
func(required)Indicates the function of the mark, usually implying a corresponding form. Allowed values are: "coda" (Coda (SMuFL E048 or Unicode 1D10C).), "segno" (Segno (SMuFL E047 or Unicode 1D10B).), "dalSegno" (Dal segno (SMuFL E045 or Unicode 1D109).), "daCapo" (Da capo (SMuFL E046 or Unicode 1D10A).), "fine" (Fine. (text))
glyph.auth(optional)A name or label associated with the controlled vocabulary from which the value of glyph.name or glyph.num is taken, or the textual content of the element. Allowed values are: "smufl" (Standard Music Font Layout.)
glyph.name(optional)Glyph name. Value is plain text.
glyph.num(optional)Numeric glyph reference in hexadecimal notation, e.g., "#xE000" or "U+E000". N.B. SMuFL version 1.18 uses the range U+E000 - U+ECBF. Value conforms to data.HEXNUM.
glyph.uri(optional)The web-accessible location of the controlled vocabulary from which the value of glyph.name or glyph.num is taken, or the textual content of the element. Value conforms to data.URI.
ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
label(optional)Captures text to be used to generate a label for the element to which it’s attached, a "tool tip" or prefatory text, for example. Should not be used to record document content. Value is plain text.
layer(optional)Identifies the layer to which a feature applies. One or more values of datatype positiveInteger, separated by spaces.
lendsym(optional)Symbol rendered at end of line. Value conforms to data.LINESTARTENDSYMBOL.
lendsym.size(optional)Holds the relative size of the line-end symbol. Value conforms to data.FONTSIZESCALE.
lform(optional)Describes the style of a line. Value conforms to data.LINEFORM.
lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided, or the number of "peaks" of a wavy line; a pair of space-separated values (minimum and maximum, respectively) provides a range between which a rendering system-supplied value may fall, while a single value indicates a fixed amount of space; that is, the minimum and maximum values are equal. One or two values of datatype a positive integer no smaller than 2, separated by a space.
lstartsym(optional)Symbol rendered at start of line. Value conforms to data.LINESTARTENDSYMBOL.
lstartsym.size(optional)Holds the relative size of the line-start symbol. Value conforms to data.FONTSIZESCALE.
lwidth(optional)Width of a line. Value conforms to data.LINEWIDTH.
n(optional)Provides a number-like designation that indicates an element’s position in a sequence of similar elements. May not contain space characters. Value conforms to data.WORD.
next(optional)Used to point to the next event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
part(optional)Indicates the part in which the current feature should appear. Use '%all' when the feature should occur in every part. One or more values of datatype a string matching the following regular expression: "(%all|#[\i][\c]+)" , separated by spaces.
partstaff(optional)Signifies the part staff on which a notated feature occurs. Use '%all' when the feature should occur on every staff. One or more values of datatype a string matching the following regular expression: "(%all|\d+(-\d+)?)" , separated by spaces.
place(optional)Captures the placement of the item with respect to the staff with which it is associated. Value conforms to data.STAFFREL.
plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship. One or more values from data.URI, separated by spaces.
precedes(optional)Points to one or more events in a user-defined collection that are known to be successors of the current element. One or more values from data.URI, separated by spaces.
prev(optional)Points to the previous event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
resp(optional)Indicates the agent(s) responsible for some aspect of the text’s transcription, editing, or encoding. Its value must point to one or more identifiers declared in the document header. One or more values from data.URI, separated by spaces.
sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element. One or more values from data.URI, separated by spaces.
staff(recommended)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable. One or more values of datatype positiveInteger, separated by spaces.
startho(optional)Records the horizontal adjustment of a feature’s programmatically-determined start point. Value conforms to data.MEASUREMENTSIGNED.
startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies. Value conforms to data.URI.
startto(optional)Records a timestamp adjustment of a feature’s programmatically-determined start point. Value conforms to data.TSTAMPOFFSET.
synch(optional)Points to elements that are synchronous with the current element. One or more values from data.URI, separated by spaces.
to(optional)Records a timestamp adjustment of a feature’s programmatically-determined location in terms of musical time; that is, beats. Value conforms to data.TSTAMPOFFSET.
translit(optional)Specifies the transliteration technique used. Value is a NMTOKEN.
tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
tstamp.real(optional)Records the onset time in terms of ISO time. Value conforms to data.ISOTIME.
tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure. Value conforms to data.MEASUREBEAT.
tstamp2.ges(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure. Value conforms to data.MEASUREBEAT.
tstamp2.real(optional)Records the ending point of an event in terms of ISO time. Value conforms to data.ISOTIME.
type(optional)Designation which characterizes the element in some sense, using any convenient classification scheme or typology that employs single-token labels. One or more values of datatype NMTOKEN, separated by spaces.
vgrp(optional)Provides a label for members of a vertically aligned group. Value is a positive integer.
vo(optional)Records the vertical adjustment of a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a when element elsewhere in the document. Value conforms to data.URI.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value is a decimal number.
xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references. Value conforms to data.URI.
xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value. Value is a valid xml:id.
xml:lang(optional)Identifies the language of the element’s content. The values for this attribute are language 'tags' as defined in BCP 47. All language tags that make use of private use sub-tags must be documented in a corresponding language element in the MEI header whose id attribute is the same as the language tag’s value. Value is a language.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value is a decimal number.
(MEI.shared) Attributes common to many elements.
(MEI.shared) Attributes that form the basis of the att.common class.
xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references. Value conforms to data.URI.
(MEI.shared) Attributes that uniquely identify an element.
xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value. Value is a valid xml:id.
(MEI.shared)
label(optional)Captures text to be used to generate a label for the element to which it’s attached, a "tool tip" or prefatory text, for example. Should not be used to record document content. Value is plain text.
(MEI.shared) Attributes that specify element-to-element relationships.
copyof(optional)Points to an element of which the current element is a copy. Value conforms to data.URI.
corresp(optional)Used to point to other elements that correspond to this one in a generic fashion. One or more values from data.URI, separated by spaces.
follows(optional)points to one or more events in a user-defined collection that are known to be predecessors of the current element. One or more values from data.URI, separated by spaces.
next(optional)Used to point to the next event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
precedes(optional)Points to one or more events in a user-defined collection that are known to be successors of the current element. One or more values from data.URI, separated by spaces.
prev(optional)Points to the previous event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element. One or more values from data.URI, separated by spaces.
synch(optional)Points to elements that are synchronous with the current element. One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes used to supply a number-like designation for an element.
n(optional)Provides a number-like designation that indicates an element’s position in a sequence of similar elements. May not contain space characters. Value conforms to data.WORD.
(MEI.shared) Attributes capturing information regarding responsibility for some aspect of the text's creation, transcription, editing, or encoding.
resp(optional)Indicates the agent(s) responsible for some aspect of the text’s transcription, editing, or encoding. Its value must point to one or more identifiers declared in the document header. One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes which can be used to classify features.
type(optional)Designation which characterizes the element in some sense, using any convenient classification scheme or typology that employs single-token labels. One or more values of datatype NMTOKEN, separated by spaces.
(MEI.shared) Attributes which can be used to classify features.
class(optional)Contains one or more URIs which denote classification terms that apply to the entity bearing this attribute. One or more values from data.URI, separated by spaces.
(MEI.facsimile) Attributes that associate a feature corresponding with all or part of an image.
facs(optional)Points to one or more images, portions of an image, or surfaces which correspond to the current element. One or more values from data.URI, separated by spaces.
(MEI.shared) Language attributes common to text elements.
xml:lang(optional)Identifies the language of the element’s content. The values for this attribute are language 'tags' as defined in BCP 47. All language tags that make use of private use sub-tags must be documented in a corresponding language element in the MEI header whose id attribute is the same as the language tag’s value. Value is a language.
translit(optional)Specifies the transliteration technique used. Value is a NMTOKEN.
(MEI.shared) Logical domain attributes.
func(required)Indicates the function of the mark, usually implying a corresponding form. Allowed values are: "coda" (Coda (SMuFL E048 or Unicode 1D10C).), "segno" (Segno (SMuFL E047 or Unicode 1D10B).), "dalSegno" (Dal segno (SMuFL E045 or Unicode 1D109).), "daCapo" (Da capo (SMuFL E046 or Unicode 1D10A).), "fine" (Fine. (text))
(MEI.shared) Attributes shared by events which rely on other events for their existence. For example, a slur/phrase marking must be drawn between or over a group of notes. The slur is therefore a control event.
(MEI.performance) Temporal alignment attributes.
when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a when element elsewhere in the document. Value conforms to data.URI.
(MEI.shared) Attributes that identify the layer to which a feature applies.
layer(optional)Identifies the layer to which a feature applies. One or more values of datatype positiveInteger, separated by spaces.
(MEI.shared) Attributes for identifying the part in which the current feature appears.
part(optional)Indicates the part in which the current feature should appear. Use '%all' when the feature should occur in every part. One or more values of datatype a string matching the following regular expression: "(%all|#[\i][\c]+)" , separated by spaces.
partstaff(optional)Signifies the part staff on which a notated feature occurs. Use '%all' when the feature should occur on every staff. One or more values of datatype a string matching the following regular expression: "(%all|\d+(-\d+)?)" , separated by spaces.
(MEI.shared) Attributes listing the active participants in a user-defined collection.
plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship. One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes for identifying the staff associated with the current feature.
staff(recommended)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable. One or more values of datatype positiveInteger, separated by spaces.
(MEI.shared) Attributes that deal with resolution of values in plist or target attributes.
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
(MEI.shared) Attributes that record a time stamp in terms of musical time, , beats[.fractional beat part].
tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
(MEI.gestural) Attributes that record a performed (as opposed to notated) time stamp.
tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
tstamp.real(optional)Records the onset time in terms of ISO time. Value conforms to data.ISOTIME.
(MEI.shared) Attributes that permit total duration to be represented by multiple values.
dur(optional)When a duration cannot be represented as a single power-of-two value, multiple space-separated values that add up to the total duration may be used. One or more values from data.DURATION, separated by spaces.
(MEI.shared) Attributes recording the identifiers of the first and last elements of a sequence of elements to which the current element is associated.
endid(optional)Indicates the final element in a sequence of events to which the feature applies. Value conforms to data.URI.
(MEI.shared) Attributes that identify a relative starting point.
startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies. Value conforms to data.URI.
(MEI.shared) Attributes that record a time stamp for the end of an event in terms of musical time.
tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure. Value conforms to data.MEASUREBEAT.
(MEI.visual) Visual domain attributes.
(MEI.shared) Attributes that describe extension symbols, typically lines. Members of this class are also typically members of the att.lineRend class.
extender(optional)Indicates the presence of an extension symbol, typically a line. Value conforms to data.BOOLEAN.
(MEI.shared) Attributes that record the visual rendition of lines.
lendsym(optional)Symbol rendered at end of line. Value conforms to data.LINESTARTENDSYMBOL.
lendsym.size(optional)Holds the relative size of the line-end symbol. Value conforms to data.FONTSIZESCALE.
lstartsym(optional)Symbol rendered at start of line. Value conforms to data.LINESTARTENDSYMBOL.
lstartsym.size(optional)Holds the relative size of the line-start symbol. Value conforms to data.FONTSIZESCALE.
(MEI.shared) Attributes that record the basic visual rendition of lines.
lform(optional)Describes the style of a line. Value conforms to data.LINEFORM.
lwidth(optional)Width of a line. Value conforms to data.LINEWIDTH.
lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided, or the number of "peaks" of a wavy line; a pair of space-separated values (minimum and maximum, respectively) provides a range between which a rendering system-supplied value may fall, while a single value indicates a fixed amount of space; that is, the minimum and maximum values are equal. One or two values of datatype a positive integer no smaller than 2, separated by a space.
(MEI.externalsymbols) Attributes used to associate MEI features with corresponding glyphs in an externally-defined standard such as SMuFL.
(MEI.externalsymbols) Attributes that point to an external symbol authority.
glyph.auth(optional)A name or label associated with the controlled vocabulary from which the value of glyph.name or glyph.num is taken, or the textual content of the element. Allowed values are: "smufl" (Standard Music Font Layout.)
glyph.uri(optional)The web-accessible location of the controlled vocabulary from which the value of glyph.name or glyph.num is taken, or the textual content of the element. Value conforms to data.URI.
(MEI.externalsymbols) Attributes that specify names or values taken from an external symbol authority.
glyph.name(optional)Glyph name. Value is plain text.
glyph.num(optional)Numeric glyph reference in hexadecimal notation, e.g., "#xE000" or "U+E000". N.B. SMuFL version 1.18 uses the range U+E000 - U+ECBF. Value conforms to data.HEXNUM.
(MEI.shared) Attributes capturing placement information with respect to the staff.
place(optional)Captures the placement of the item with respect to the staff with which it is associated. Value conforms to data.STAFFREL.
(MEI.shared) Attributes that record grouping of vertically aligned elements.
vgrp(optional)Provides a label for members of a vertically aligned group. Value is a positive integer.
(MEI.shared) Visual offset attributes. Some items may have their location recorded in terms of offsets from their programmatically-determined location. The ho attribute records the horizontal offset while vo records the vertical. The to attribute holds a timestamp offset, the most common use of which is as an alternative to the ho attribute.
(MEI.shared) Horizontal offset attributes.
ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
(MEI.shared) Horizontal offset attributes specified in terms of time.
to(optional)Records a timestamp adjustment of a feature’s programmatically-determined location in terms of musical time; that is, beats. Value conforms to data.TSTAMPOFFSET.
(MEI.shared) Vertical offset attributes.
vo(optional)Records the vertical adjustment of a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
(MEI.shared) Horizontal offset requiring a pair of attributes.
startho(optional)Records the horizontal adjustment of a feature’s programmatically-determined start point. Value conforms to data.MEASUREMENTSIGNED.
endho(optional)Records the horizontal adjustment of a feature’s programmatically-determined end point. Value conforms to data.MEASUREMENTSIGNED.
(MEI.shared) Horizontal offset attributes requiring a pair of attributes specified in terms of time.
startto(optional)Records a timestamp adjustment of a feature’s programmatically-determined start point. Value conforms to data.TSTAMPOFFSET.
endto(optional)Records a timestamp adjustment of a feature’s programmatically-determined end point. Value conforms to data.TSTAMPOFFSET.
(MEI.shared) Output coordinate attributes. Some elements may have their exact rendered *output* coordinates recorded. x and y attributes indicate where to place the rendered output. Recording the coordinates of a feature in a facsimile requires the use of the facs attribute.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value is a decimal number.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value is a decimal number.
(MEI.gestural) Gestural domain attributes.
(MEI.gestural) Attributes that record performed duration that differs from a feature’s written duration.
dur.ges(optional)Records performed duration information that differs from the written duration. Value conforms to data.DURATION.GESTURAL.
dots.ges(optional)Number of dots required for a gestural duration when different from that of the written duration. Value conforms to data.AUGMENTDOT.
dur.metrical(optional)Duration as a count of units provided in the time signature denominator. Value is a decimal number.
dur.ppq(optional)Duration recorded as pulses-per-quarter note, e.g., MIDI clicks or MusicXML divisions. Value is a positive integer, including 0.
dur.real(optional)Duration in seconds, e.g., 1.732. Value is a decimal number.
dur.recip(optional)Duration as an optionally dotted Humdrum **recip value. Value is a token.
(MEI.gestural) Attributes that record a performed (as opposed to notated) time stamp for the end of an event.
tstamp2.ges(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure. Value conforms to data.MEASUREBEAT.
tstamp2.real(optional)Records the ending point of an event in terms of ISO time. Value conforms to data.ISOTIME.
(MEI.analytical) Analytical domain attributes.
External symbols component declarations.
glyph.auth(optional)A name or label associated with the controlled vocabulary from which the value of glyph.name or glyph.num is taken, or the textual content of the element. Allowed values are: "smufl" (Standard Music Font Layout.)
glyph.name(optional)Glyph name. Value is plain text.
glyph.num(optional)Numeric glyph reference in hexadecimal notation, e.g., "#xE000" or "U+E000". N.B. SMuFL version 1.18 uses the range U+E000 - U+ECBF. Value conforms to data.HEXNUM.
glyph.uri(optional)The web-accessible location of the controlled vocabulary from which the value of glyph.name or glyph.num is taken, or the textual content of the element. Value conforms to data.URI.
Facsimile component declarations.
facs(optional)Points to one or more images, portions of an image, or surfaces which correspond to the current element. One or more values from data.URI, separated by spaces.
Gestural component declarations.
dots.ges(optional)Number of dots required for a gestural duration when different from that of the written duration. Value conforms to data.AUGMENTDOT.
dur.ges(optional)Records performed duration information that differs from the written duration. Value conforms to data.DURATION.GESTURAL.
dur.metrical(optional)Duration as a count of units provided in the time signature denominator. Value is a decimal number.
dur.ppq(optional)Duration recorded as pulses-per-quarter note, e.g., MIDI clicks or MusicXML divisions. Value is a positive integer, including 0.
dur.real(optional)Duration in seconds, e.g., 1.732. Value is a decimal number.
dur.recip(optional)Duration as an optionally dotted Humdrum **recip value. Value is a token.
tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
tstamp.real(optional)Records the onset time in terms of ISO time. Value conforms to data.ISOTIME.
tstamp2.ges(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure. Value conforms to data.MEASUREBEAT.
tstamp2.real(optional)Records the ending point of an event in terms of ISO time. Value conforms to data.ISOTIME.
Performance component declarations.
when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a when element elsewhere in the document. Value conforms to data.URI.
Component declarations that are shared between two or more modules.
class(optional)Contains one or more URIs which denote classification terms that apply to the entity bearing this attribute. One or more values from data.URI, separated by spaces.
copyof(optional)Points to an element of which the current element is a copy. Value conforms to data.URI.
corresp(optional)Used to point to other elements that correspond to this one in a generic fashion. One or more values from data.URI, separated by spaces.
dur(optional)When a duration cannot be represented as a single power-of-two value, multiple space-separated values that add up to the total duration may be used. One or more values from data.DURATION, separated by spaces.
endho(optional)Records the horizontal adjustment of a feature’s programmatically-determined end point. Value conforms to data.MEASUREMENTSIGNED.
endid(optional)Indicates the final element in a sequence of events to which the feature applies. Value conforms to data.URI.
endto(optional)Records a timestamp adjustment of a feature’s programmatically-determined end point. Value conforms to data.TSTAMPOFFSET.
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
extender(optional)Indicates the presence of an extension symbol, typically a line. Value conforms to data.BOOLEAN.
follows(optional)points to one or more events in a user-defined collection that are known to be predecessors of the current element. One or more values from data.URI, separated by spaces.
func(required)Indicates the function of the mark, usually implying a corresponding form. Allowed values are: "coda" (Coda (SMuFL E048 or Unicode 1D10C).), "segno" (Segno (SMuFL E047 or Unicode 1D10B).), "dalSegno" (Dal segno (SMuFL E045 or Unicode 1D109).), "daCapo" (Da capo (SMuFL E046 or Unicode 1D10A).), "fine" (Fine. (text))
ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
label(optional)Captures text to be used to generate a label for the element to which it’s attached, a "tool tip" or prefatory text, for example. Should not be used to record document content. Value is plain text.
layer(optional)Identifies the layer to which a feature applies. One or more values of datatype positiveInteger, separated by spaces.
lendsym(optional)Symbol rendered at end of line. Value conforms to data.LINESTARTENDSYMBOL.
lendsym.size(optional)Holds the relative size of the line-end symbol. Value conforms to data.FONTSIZESCALE.
lform(optional)Describes the style of a line. Value conforms to data.LINEFORM.
lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided, or the number of "peaks" of a wavy line; a pair of space-separated values (minimum and maximum, respectively) provides a range between which a rendering system-supplied value may fall, while a single value indicates a fixed amount of space; that is, the minimum and maximum values are equal. One or two values of datatype a positive integer no smaller than 2, separated by a space.
lstartsym(optional)Symbol rendered at start of line. Value conforms to data.LINESTARTENDSYMBOL.
lstartsym.size(optional)Holds the relative size of the line-start symbol. Value conforms to data.FONTSIZESCALE.
lwidth(optional)Width of a line. Value conforms to data.LINEWIDTH.
n(optional)Provides a number-like designation that indicates an element’s position in a sequence of similar elements. May not contain space characters. Value conforms to data.WORD.
next(optional)Used to point to the next event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
part(optional)Indicates the part in which the current feature should appear. Use '%all' when the feature should occur in every part. One or more values of datatype a string matching the following regular expression: "(%all|#[\i][\c]+)" , separated by spaces.
partstaff(optional)Signifies the part staff on which a notated feature occurs. Use '%all' when the feature should occur on every staff. One or more values of datatype a string matching the following regular expression: "(%all|\d+(-\d+)?)" , separated by spaces.
place(optional)Captures the placement of the item with respect to the staff with which it is associated. Value conforms to data.STAFFREL.
plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship. One or more values from data.URI, separated by spaces.
precedes(optional)Points to one or more events in a user-defined collection that are known to be successors of the current element. One or more values from data.URI, separated by spaces.
prev(optional)Points to the previous event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
resp(optional)Indicates the agent(s) responsible for some aspect of the text’s transcription, editing, or encoding. Its value must point to one or more identifiers declared in the document header. One or more values from data.URI, separated by spaces.
sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element. One or more values from data.URI, separated by spaces.
staff(recommended)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable. One or more values of datatype positiveInteger, separated by spaces.
startho(optional)Records the horizontal adjustment of a feature’s programmatically-determined start point. Value conforms to data.MEASUREMENTSIGNED.
startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies. Value conforms to data.URI.
startto(optional)Records a timestamp adjustment of a feature’s programmatically-determined start point. Value conforms to data.TSTAMPOFFSET.
synch(optional)Points to elements that are synchronous with the current element. One or more values from data.URI, separated by spaces.
to(optional)Records a timestamp adjustment of a feature’s programmatically-determined location in terms of musical time; that is, beats. Value conforms to data.TSTAMPOFFSET.
translit(optional)Specifies the transliteration technique used. Value is a NMTOKEN.
tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure. Value conforms to data.MEASUREBEAT.
type(optional)Designation which characterizes the element in some sense, using any convenient classification scheme or typology that employs single-token labels. One or more values of datatype NMTOKEN, separated by spaces.
vgrp(optional)Provides a label for members of a vertically aligned group. Value is a positive integer.
vo(optional)Records the vertical adjustment of a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value is a decimal number.
xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references. Value conforms to data.URI.
xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value. Value is a valid xml:id.
xml:lang(optional)Identifies the language of the element’s content. The values for this attribute are language 'tags' as defined in BCP 47. All language tags that make use of private use sub-tags must be documented in a corresponding language element in the MEI header whose id attribute is the same as the language tag’s value. Value is a language.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value is a decimal number.
Member of
model.controlEventLikeGroups elements, such as dynamics, ties, phrase marks, pedal marks, etc., which depend upon other events, such as notes or rests, for their existence.
Contained By
(MEI.shared) Groups elements, such as dynamics, ties, phrase marks, pedal marks, etc., which depend upon other events, such as notes or rests, for their existence.
(MEI.cmn) Groups elements that may appear within a CMN measure.
measureUnit of musical time consisting of a fixed number of note values of a given type, as determined by the prevailing meter, and delimited in musical notation by bar lines.
(MEI.critapp) Groups elements that may appear as part of a musical variant.
(MEI.critapp) Groups elements that may appear as part of a textual or musical variant.
lemContains the lemma, or base text, of a textual variation.
rdgContains a single reading within a textual variation.
(MEI.edittrans) Groups elements that may appear as part of editorial and transcription elements in music notation.
(MEI.edittrans) Groups elements that may appear as part of editorial and transcription elements.
abbrA generic element for 1) a shortened form of a word, including an acronym or 2) a shorthand notation.
addMarks an addition to the text.
corrContains the correct form of an apparent erroneous passage.
damageContains an area of damage to the physical medium.
delContains information deleted, marked as deleted, or otherwise indicated as superfluous or spurious in the copy text by an author, scribe, annotator, or corrector.
expanContains the expansion of an abbreviation.
origContains material which is marked as following the original, rather than being normalized or corrected.
regContains material which has been regularized or normalized in some sense.
restoreIndicates restoration of material to an earlier state by cancellation of an editorial or authorial marking or instruction.
sicContains apparently incorrect or inaccurate material.
suppliedContains material supplied by the transcriber or editor for any reason.
unclearContains material that cannot be transcribed with certainty because it is illegible or inaudible in the source.
(MEI.mensural) Groups elements that are components of a staff in the mensural repertoire.
(MEI.shared) Groups elements that are components of a staff in the mensural and neume repertoires.
(MEI.shared) Groups elements that are components of a staff.
oStaffA staff that holds an alternative passage which may be played instead of the original material.
staffA group of equidistant horizontal lines on which notes are placed in order to represent pitch or a grouping element for individual 'strands' of notes, rests, etc. that may or may not actually be rendered on staff lines; that is, both diastematic and non-diastematic signs.
(MEI.neumes) Groups elements that may appear as part of the content of a syllable.
syllableNeume notation can be thought of as "neumed text". Therefore, the syllable element provides high-level organization in this repertoire.
Common Music Notation (CMN) repertoire component declarations.
measureUnit of musical time consisting of a fixed number of note values of a given type, as determined by the prevailing meter, and delimited in musical notation by bar lines.
oStaffA staff that holds an alternative passage which may be played instead of the original material.
Critical apparatus component declarations.
lemContains the lemma, or base text, of a textual variation.
rdgContains a single reading within a textual variation.
Editorial and transcriptional component declarations.
abbrA generic element for 1) a shortened form of a word, including an acronym or 2) a shorthand notation.
addMarks an addition to the text.
corrContains the correct form of an apparent erroneous passage.
damageContains an area of damage to the physical medium.
delContains information deleted, marked as deleted, or otherwise indicated as superfluous or spurious in the copy text by an author, scribe, annotator, or corrector.
expanContains the expansion of an abbreviation.
origContains material which is marked as following the original, rather than being normalized or corrected.
regContains material which has been regularized or normalized in some sense.
restoreIndicates restoration of material to an earlier state by cancellation of an editorial or authorial marking or instruction.
sicContains apparently incorrect or inaccurate material.
suppliedContains material supplied by the transcriber or editor for any reason.
unclearContains material that cannot be transcribed with certainty because it is illegible or inaudible in the source.
Neume repertoire component declarations.
syllableNeume notation can be thought of as "neumed text". Therefore, the syllable element provides high-level organization in this repertoire.
Component declarations that are shared between two or more modules.
staffA group of equidistant horizontal lines on which notes are placed in order to represent pitch or a grouping element for individual 'strands' of notes, rests, etc. that may or may not actually be rendered on staff lines; that is, both diastematic and non-diastematic signs.
May Contain
textual content
(MEI.edittrans) Groups elements for editorial interventions that may be useful both in transcribing and in authoring processes.
choiceGroups a number of alternative encodings for the same point in a text.
substGroups transcriptional elements when the combination is to be regarded as a single intervention in the text.
(MEI.edittrans) Groups elements used for editorial transcription of pre-existing source materials.
addMarks an addition to the text.
corrContains the correct form of an apparent erroneous passage.
damageContains an area of damage to the physical medium.
delContains information deleted, marked as deleted, or otherwise indicated as superfluous or spurious in the copy text by an author, scribe, annotator, or corrector.
gapIndicates a point where material has been omitted in a transcription, whether as part of sampling practice or for editorial reasons described in the MEI header.
handShiftMarks the beginning of a passage written in a new hand, or of a change in the scribe, writing style, ink or character of the document hand.
origContains material which is marked as following the original, rather than being normalized or corrected.
regContains material which has been regularized or normalized in some sense.
restoreIndicates restoration of material to an earlier state by cancellation of an editorial or authorial marking or instruction.
sicContains apparently incorrect or inaccurate material.
suppliedContains material supplied by the transcriber or editor for any reason.
unclearContains material that cannot be transcribed with certainty because it is illegible or inaudible in the source.
(MEI.shared) Groups textual elements that occur at the level of individual words or phrases. This class is equivalent to the model.textPhraseLike class without the pb element.
dedicateeEntity to whom a creative work is formally offered.
dimensionsInformation about the physical size of an entity; usually includes numerical data.
extentUsed to express size in terms other than physical dimensions, such as number of pages, records, bytes, physical components, etc.
segrepresents any segmentation of text below the "text component" level.
symbolA reference to a previously defined symbol.
termKeyword or phrase which describes a resource.
(MEI.figtable) Groups elements representing or containing graphic information such as an illustration or figure.
figGroups elements representing or containing graphic information such as an illustration or figure.
(MEI.msDesc) Groups elements that may appear inline when the msdesc module is active.
catchwordsDescribes the system used to ensure correct ordering of the quires making up an item, typically by means of annotations at the foot of the page.
heraldryContains a heraldic formula or phrase, typically found as part of a blazon, coat of arms, etc.
locusDefines a location within a manuscript or manuscript component, usually as a (possibly discontinuous) sequence of folio references.
locusGrpGroups locations which together form a distinct but discontinuous item within a manuscript or manuscript part, according to a specific foliation.
secFolioMarks the word or words taken from a fixed point in a codex (typically the beginning of the second leaf) in order to provide a unique identifier for the item.
signaturesProvides a description of the leaf or quire signatures found within a codex.
stampContains a word or phrase describing an official mark indicating ownership, genuineness, validity, etc.
watermarkContains a description of a watermark or similar device.
(MEI.namesdates) Groups elements used as part of a physical address.
postBoxContains a number or other identifier for some postal delivery point other than a street address.
postCodeContains a numerical or alphanumeric code used as part of a postal address to simplify sorting or delivery of mail.
streetfull street address including any name or number identifying a building as well as the name of the street or route on which it is located.
(MEI.namesdates) Groups elements which form part of a geographic name.
blocContains the name of a geopolitical unit consisting of two or more nation states or countries.
countryContains the name of a geopolitical unit, such as a nation, country, colony, or commonwealth, larger than or administratively superior to a region and smaller than a bloc.
districtContains the name of any kind of subdivision of a settlement, such as a parish, ward, or other administrative or geographic unit.
geogFeatContains a common noun identifying a geographical feature.
regionContains the name of an administrative unit such as a state, province, or county, larger than a settlement, but smaller than a country.
settlementContains the name of a settlement such as a city, town, or village identified as a single geopolitical or administrative unit.
(MEI.namesdates) Groups elements that serve as stylistic labels.
periodNameA label that describes a period of time, such as 'Baroque' or '3rd Style period'.
styleNameA label for a characteristic style of writing or performance, such as 'bebop' or 'rock-n-roll'.
(MEI.ptrref) Groups elements used for purposes of location and reference.
ptrDefines a traversible pointer to another location, using only attributes to describe the destination.
refDefines a traversible reference to another location. May contain text and sub-elements that describe the destination.
(MEI.shared) Groups elements used to represent a postal address.
addressContains a postal address, for example of a publisher, an organization, or an individual.
(MEI.shared) Groups annotation-like elements.
annotProvides a statement explaining the text or indicating the basis for an assertion.
(MEI.shared) Groups elements containing a bibliographic description.
biblProvides a loosely-structured bibliographic citation in which the sub-components may or may not be explicitly marked.
biblStructContains a bibliographic citation in which bibliographic sub-elements must appear in a specified order.
(MEI.shared) Groups elements containing date expressions.
dateA string identifying a point in time or the time period between two such points.
(MEI.shared) Groups elements which describe a measurement forming part of the physical dimensions of an object.
depthDescription of a measurement taken through a three-dimensional object.
dimAny single dimensional specification.
heightDescription of the vertical size of an object.
widthDescription of the horizontal size of an object.
(MEI.shared) Groups editorial intervention elements.
abbrA generic element for 1) a shortened form of a word, including an acronym or 2) a shorthand notation.
expanContains the expansion of an abbreviation.
(MEI.shared) Groups identifier-like elements.
identifierAn alpha-numeric string that establishes the identity of the described material.
(MEI.shared) Groups elements that function like line beginnings.
lbAn empty formatting element that forces text to begin on a new line.
(MEI.shared) Groups elements that represent a measurement.
(MEI.shared) Groups elements that denote a number or a quantity.
numNumeric information in any form.
(MEI.shared) Groups elements that contain names.
nameProper noun or noun phrase.
(MEI.namesdates) Groups elements which contain names of individuals or corporate bodies.
corpNameIdentifies an organization or group of people that acts as a single entity.
persNameDesignation for an individual, including any or all of that individual's forenames, surnames, honorific titles, and added names.
(MEI.namesdates) Groups place name elements.
(MEI.namesdates) Groups geographic name elements.
geogNameThe proper noun designation for a place, natural feature, or political jurisdiction.
(MEI.shared) Groups elements that denote a corporate entity that holds a bibliographic item.
repositoryInstitution, agency, or individual which holds a bibliographic item.
(MEI.shared) Collects elements that express a relationship.
relationDescribes a relationship or linkage amongst entities.
relationListGathers relation elements.
(MEI.shared) Groups elements that mark typographical features.
rendA formatting element indicating special visual rendering, e.g., bold or italicized, of a text word or phrase.
stackAn inline table with a single column.
(MEI.shared) Groups elements that denote the name of a bibliographic item.
titleTitle of a bibliographic entity.
(MEI.text) Groups elements related to highlighting which can appear at the phrase-level.
qContains material which is distinguished from the surrounding phrase-level text using quotation marks or a similar method. Use quote for block-level quotations.
(MEI.usersymbols) Groups elements that function as drawing primitives.
anchoredTextContainer for text that is fixed to a particular page location, regardless of changes made to the layout of the measures around it.
curveA curved line that cannot be represented by a more specific element, such as a slur.
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
textual content
Editorial and transcriptional component declarations.
abbrA generic element for 1) a shortened form of a word, including an acronym or 2) a shorthand notation.
addMarks an addition to the text.
choiceGroups a number of alternative encodings for the same point in a text.
corrContains the correct form of an apparent erroneous passage.
damageContains an area of damage to the physical medium.
delContains information deleted, marked as deleted, or otherwise indicated as superfluous or spurious in the copy text by an author, scribe, annotator, or corrector.
expanContains the expansion of an abbreviation.
gapIndicates a point where material has been omitted in a transcription, whether as part of sampling practice or for editorial reasons described in the MEI header.
handShiftMarks the beginning of a passage written in a new hand, or of a change in the scribe, writing style, ink or character of the document hand.
origContains material which is marked as following the original, rather than being normalized or corrected.
regContains material which has been regularized or normalized in some sense.
restoreIndicates restoration of material to an earlier state by cancellation of an editorial or authorial marking or instruction.
sicContains apparently incorrect or inaccurate material.
substGroups transcriptional elements when the combination is to be regarded as a single intervention in the text.
suppliedContains material supplied by the transcriber or editor for any reason.
unclearContains material that cannot be transcribed with certainty because it is illegible or inaudible in the source.
Figures and tables component declarations.
figGroups elements representing or containing graphic information such as an illustration or figure.
Metadata header component declarations.
watermarkContains a description of a watermark or similar device.
Manuscript description component declarations.
catchwordsDescribes the system used to ensure correct ordering of the quires making up an item, typically by means of annotations at the foot of the page.
heraldryContains a heraldic formula or phrase, typically found as part of a blazon, coat of arms, etc.
locusDefines a location within a manuscript or manuscript component, usually as a (possibly discontinuous) sequence of folio references.
locusGrpGroups locations which together form a distinct but discontinuous item within a manuscript or manuscript part, according to a specific foliation.
secFolioMarks the word or words taken from a fixed point in a codex (typically the beginning of the second leaf) in order to provide a unique identifier for the item.
signaturesProvides a description of the leaf or quire signatures found within a codex.
stampContains a word or phrase describing an official mark indicating ownership, genuineness, validity, etc.
Names and dates component declarations.
blocContains the name of a geopolitical unit consisting of two or more nation states or countries.
corpNameIdentifies an organization or group of people that acts as a single entity.
countryContains the name of a geopolitical unit, such as a nation, country, colony, or commonwealth, larger than or administratively superior to a region and smaller than a bloc.
districtContains the name of any kind of subdivision of a settlement, such as a parish, ward, or other administrative or geographic unit.
geogFeatContains a common noun identifying a geographical feature.
geogNameThe proper noun designation for a place, natural feature, or political jurisdiction.
periodNameA label that describes a period of time, such as 'Baroque' or '3rd Style period'.
persNameDesignation for an individual, including any or all of that individual's forenames, surnames, honorific titles, and added names.
postBoxContains a number or other identifier for some postal delivery point other than a street address.
postCodeContains a numerical or alphanumeric code used as part of a postal address to simplify sorting or delivery of mail.
regionContains the name of an administrative unit such as a state, province, or county, larger than a settlement, but smaller than a country.
settlementContains the name of a settlement such as a city, town, or village identified as a single geopolitical or administrative unit.
streetfull street address including any name or number identifying a building as well as the name of the street or route on which it is located.
styleNameA label for a characteristic style of writing or performance, such as 'bebop' or 'rock-n-roll'.
Pointer and reference component declarations.
ptrDefines a traversible pointer to another location, using only attributes to describe the destination.
refDefines a traversible reference to another location. May contain text and sub-elements that describe the destination.
Component declarations that are shared between two or more modules.
addressContains a postal address, for example of a publisher, an organization, or an individual.
annotProvides a statement explaining the text or indicating the basis for an assertion.
biblProvides a loosely-structured bibliographic citation in which the sub-components may or may not be explicitly marked.
biblStructContains a bibliographic citation in which bibliographic sub-elements must appear in a specified order.
dateA string identifying a point in time or the time period between two such points.
dedicateeEntity to whom a creative work is formally offered.
depthDescription of a measurement taken through a three-dimensional object.
dimAny single dimensional specification.
dimensionsInformation about the physical size of an entity; usually includes numerical data.
extentUsed to express size in terms other than physical dimensions, such as number of pages, records, bytes, physical components, etc.
heightDescription of the vertical size of an object.
identifierAn alpha-numeric string that establishes the identity of the described material.
lbAn empty formatting element that forces text to begin on a new line.
nameProper noun or noun phrase.
numNumeric information in any form.
relationDescribes a relationship or linkage amongst entities.
relationListGathers relation elements.
rendA formatting element indicating special visual rendering, e.g., bold or italicized, of a text word or phrase.
repositoryInstitution, agency, or individual which holds a bibliographic item.
stackAn inline table with a single column.
symbolA reference to a previously defined symbol.
termKeyword or phrase which describes a resource.
titleTitle of a bibliographic entity.
widthDescription of the horizontal size of an object.
Text component declarations.
qContains material which is distinguished from the surrounding phrase-level text using quotation marks or a similar method. Use quote for block-level quotations.
segrepresents any segmentation of text below the "text component" level.
User-defined symbols component declarations.
anchoredTextContainer for text that is fixed to a particular page location, regardless of changes made to the layout of the measures around it.
curveA curved line that cannot be represented by a more specific element, such as a slur.
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
Remarks

When only func is provided to describe the function of the repeat mark (i.e., without glyph information and no textual content), then a renderer can rely on it to display the appropriate symbol. When textual content is provided, it will take precedence over the symbol implied by the function. Generic repeat marks where no function can be determined, then generic dir elements should be used.

Constraints

Must have one of the attributes: startid, tstamp, tstamp.ges or tstamp.real.
When @glyph.name or @glyph.num is present, repeatMark must not have content.

Declaration
<elementSpec ident="repeatMark" module="MEI.cmn">
<gloss versionDate="2022-05-18" xml:lang="en">repetition mark</gloss>
<desc xml:lang="en"> An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.</desc>
<classes>
<memberOf key="att.common"/>
<memberOf key="att.facsimile"/>
<memberOf key="att.lang"/>
<memberOf key="att.repeatMark.log"/>
<memberOf key="att.repeatMark.vis"/>
<memberOf key="att.repeatMark.ges"/>
<memberOf key="att.repeatMark.anl"/>
<memberOf key="model.controlEventLike"/>
</classes>
<content>
<rng:zeroOrMore>
<rng:choice>
<rng:text/>
<rng:ref name="model.graphicPrimitiveLike"/>
<rng:ref name="model.editLike"/>
<rng:ref name="model.transcriptionLike"/>
</rng:choice>
</rng:zeroOrMore>
</content>
<constraintSpec ident="repeatMark_start-type_attributes_required" scheme="isoschematron">
<constraint>
<sch:rule context="mei:repeatMark">
<sch:assert test="@startid or @tstamp or @tstamp.ges or @tstamp.real">Must have one of the attributes: startid, tstamp, tstamp.ges or tstamp.real.</sch:assert>
</sch:rule>
</constraint>
</constraintSpec>
<constraintSpec ident="repeatMark_with_glyph_has_to_be_empty" scheme="isoschematron">
<constraint>
<sch:rule context="mei:repeatMark[@glyph.num or @glyph.name]">
<sch:assert test="not(element()) and not(text())">When @glyph.name or @glyph.num is present, repeatMark must not have content.</sch:assert>
</sch:rule>
</constraint>
</constraintSpec>
<remarks xml:lang="en">
<p>When only <att>func</att> is provided to describe the function of the repeat mark (
<abbr>i.e.</abbr>
, without glyph information and no textual content), then a renderer can rely on it to display the appropriate symbol. When textual content is provided, it will take precedence over the symbol implied by the function. Generic repeat marks where no function can be determined, then generic <gi scheme="MEI">dir</gi> elements should be used. </p>
</remarks>
</elementSpec>