Output coordinate attributes. Some elements may have their exact rendered *output*
coordinates recorded. x and y attributes indicate where to place the rendered output.
Recording the coordinates of a feature in a facsimile requires the use of the facs
attribute.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value is a decimal number.
<att.xy>direct children@x
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value is a decimal number.
<att.xy>direct children@y
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value is a decimal number.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value is a decimal number.
Component declarations that are shared between two or more modules.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value is a decimal number.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value is a decimal number.
cutoutA cutout is a section of a document sheet that has been removed and is now missing.
divLineRepresents a division (divisio) in neume notation. Divisions indicate short, medium,
or long pauses
similar to breath marks in modern notation.
figGroups elements representing or containing graphic information such as an
illustration or figure.
headContains any heading, for example, the title of a section of text, or the
heading of a list.
lgMay be used for any section of text that is organized as a group of lines;
however, it is most often used for a group of verse lines functioning as a formal
unit, e.g., a
stanza, refrain, verse paragraph, etc.
listA formatting element that contains a series of items separated from one another and
arranged in a linear, often vertical, sequence.
pOne or more text phrases that form a logical prose passage.
patchDescribes a physical writing surface attached to the original document.
quoteContains a paragraph-like block of text attributed to an external
source, normally set off from the surrounding text by spacing or other typographic
distinction.
tdDesignates a table cell that contains data as opposed to a cell that
contains column or row heading information.
thDesignates a table cell containing column or row heading information as
opposed to one containing data.
trA formatting element that contains one or more cells (intersection of a row
and a column) in a table.
accidRecords a temporary alteration to the pitch of a note.
anchoredTextContainer for text that is fixed to a particular page location, regardless of changes
made
to the layout of the measures around it.
arpegIndicates that the notes of a chord are to be performed successively
rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
articAn indication of how to play a note or chord.
attaccaAn instruction to begin the next section or movement of a composition without
pause.
bendA variation in pitch (often micro-tonal) upwards or downwards during the course of
a
note.
bracketSpanMarks a sequence of notational events grouped by a bracket.
breathAn indication of a point at which the performer on an instrument requiring
breath (including the voice) may breathe.
caesuraBreak, pause, or interruption in the normal tempo of a composition. Typically indicated
by
"railroad tracks", i.e., two diagonal slashes.
chordA simultaneous sounding of two or more notes in the same layer *with the same
duration*.
cpMarkA verbal or graphical indication to copy musical material
written elsewhere.
curveA curved line that cannot be represented by a more specific element, such as a
slur.
dirAn instruction expressed as a combination of text and symbols, typically above,
below, or between staves, but not on the staff — that is not encoded elsewhere in
more specific
elements, like tempo, dynam or repeatMark.
fermataAn indication placed over a note or rest to indicate that it should be held longer
than
its written value. May also occur over a bar line to indicate the end of a phrase
or section.
Sometimes called a 'hold' or 'pause'.
fingAn individual finger in a fingering indication.
fingGrpA group of individual fingers in a fingering indication.
glissA continuous or sliding movement from one pitch to another, usually
indicated by a straight or wavy line.
grpSymA brace or bracket used to group two or more staves of a score or
part.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., <
and >.
lvA "tie-like" indication that a note should ring beyond its written duration.
mNumDesignation, name, or label for a measure, often but not always
consisting of digits. Use this element when the n attribute on measure does not adequately capture the appearance or placement of the measure
number/label.
refrainRecurring lyrics, especially at the end of each verse or stanza of a poem or song
lyrics;
a chorus.
rehIn an orchestral score and its corresponding parts, a mark indicating a
convenient point from which to resume rehearsal after a break.
repeatMark
An instruction expressed as a combination of text and symbols – segno and coda – typically
above,
below, or between staves, but not on the staff.
restA non-sounding event found in the source being transcribed.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo",
"cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
tieAn indication that two notes of the same pitch form a single note with their combined
rhythmic values.
trillRapid alternation of a note with another (usually at the interval of a second
above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the
written
note, the lower neighbor, and the written note.
verseDivision of a poem or song lyrics, sometimes having a fixed length, meter or rhyme
scheme;
a stanza.
voltaSung text for a specific iteration of a repeated section of music.
Common Music Notation (CMN) repertoire component declarations.
arpegIndicates that the notes of a chord are to be performed successively
rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
attaccaAn instruction to begin the next section or movement of a composition without
pause.
bendA variation in pitch (often micro-tonal) upwards or downwards during the course of
a
note.
bracketSpanMarks a sequence of notational events grouped by a bracket.
breathAn indication of a point at which the performer on an instrument requiring
breath (including the voice) may breathe.
fermataAn indication placed over a note or rest to indicate that it should be held longer
than
its written value. May also occur over a bar line to indicate the end of a phrase
or section.
Sometimes called a 'hold' or 'pause'.
glissA continuous or sliding movement from one pitch to another, usually
indicated by a straight or wavy line.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., <
and >.
lvA "tie-like" indication that a note should ring beyond its written duration.
mNumDesignation, name, or label for a measure, often but not always
consisting of digits. Use this element when the n attribute on measure does not adequately capture the appearance or placement of the measure
number/label.
rehIn an orchestral score and its corresponding parts, a mark indicating a
convenient point from which to resume rehearsal after a break.
repeatMark
An instruction expressed as a combination of text and symbols – segno and coda – typically
above,
below, or between staves, but not on the staff.
slurIndication of 1) a "unified melodic idea" or 2) performance technique.
tieAn indication that two notes of the same pitch form a single note with their combined
rhythmic values.
CMN ornament component declarations.
trillRapid alternation of a note with another (usually at the interval of a second
above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the
written
note, the lower neighbor, and the written note.
Dramatic text component declarations.
spContains an individual speech in a performance text.
stageDirContains any kind of stage direction within a dramatic text or
fragment.
Editorial and transcriptional component declarations.
cpMarkA verbal or graphical indication to copy musical material
written elsewhere.
Figures and tables component declarations.
figGroups elements representing or containing graphic information such as an
illustration or figure.
Component declarations that are shared between two or more modules.
accidRecords a temporary alteration to the pitch of a note.
articAn indication of how to play a note or chord.
caesuraBreak, pause, or interruption in the normal tempo of a composition. Typically indicated
by
"railroad tracks", i.e., two diagonal slashes.
chordA simultaneous sounding of two or more notes in the same layer *with the same
duration*.
dirAn instruction expressed as a combination of text and symbols, typically above,
below, or between staves, but not on the staff — that is not encoded elsewhere in
more specific
elements, like tempo, dynam or repeatMark.
lgMay be used for any section of text that is organized as a group of lines;
however, it is most often used for a group of verse lines functioning as a formal
unit, e.g., a
stanza, refrain, verse paragraph, etc.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo",
"cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
Text component declarations.
listA formatting element that contains a series of items separated from one another and
arranged in a linear, often vertical, sequence.
quoteContains a paragraph-like block of text attributed to an external
source, normally set off from the surrounding text by spacing or other typographic
distinction.
User-defined symbols component declarations.
anchoredTextContainer for text that is fixed to a particular page location, regardless of changes
made
to the layout of the measures around it.
curveA curved line that cannot be represented by a more specific element, such as a
slur.
lineA visual line that cannot be represented by a more specific; i.e., semantic,
element.
<desc xml:lang="en">Output coordinate attributes. Some elements may have their exact rendered *output*
coordinates recorded. x and y attributes indicate where to place the rendered output.
Recording the coordinates of a feature in a facsimile requires the use of the facs
attribute.</desc>
<attList>
<attDef ident="x"usage="opt">
<desc xml:lang="en">Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.</desc>
<datatype>
<rng:data type="decimal"/>
</datatype>
</attDef>
<attDef ident="y"usage="opt">
<desc xml:lang="en">Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.</desc>