att.targetEval

Attributes that deal with resolution of values in plist or target attributes.
Module
MEI.shared
Attributes
evaluate
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
<att.targetEval>direct children@evaluate
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
Component declarations that are shared between two or more modules.
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
Available at
analyticContains bibliographic elements describing an item (e.g., an article or poem) published within a monograph or journal and not as an independent publication.
annotProvides a statement explaining the text or indicating the basis for an assertion.
barLineVertical line drawn through one or more staves that divides musical notation into metrical units.
beatRptAn indication that material on a preceding beat should be repeated.
biblStructContains a bibliographic citation in which bibliographic sub-elements must appear in a specified order.
endingAlternative ending for a repeated passage of music; i.e., prima volta, seconda volta, etc.
expansionIndicates how a section may be programmatically expanded into its 'through-composed' form.
itemSingle instance or exemplar of a source/manifestation.
lemContains the lemma, or base text, of a textual variation.
manifestationA bibliographic description of a physical embodiment of an expression of a work.
measureUnit of musical time consisting of a fixed number of note values of a given type, as determined by the prevailing meter, and delimited in musical notation by bar lines.
monogrContains bibliographic elements describing an item, for example, a published book or journal, score, recording, or an unpublished manuscript.
ptrDefines a traversible pointer to another location, using only attributes to describe the destination.
rdgContains a single reading within a textual variation.
refDefines a traversible reference to another location. May contain text and sub-elements that describe the destination.
relatedItemContains or references another bibliographic item which is related to the present one.
relationDescribes a relationship or linkage amongst entities.
sectionSegment of music data.
sourceA bibliographic description of a source used in the creation of the electronic file.
workProvides a detailed description of a work — a distinct intellectual or artistic creation — specifically its history, language use, and high-level musical attributes (e.g., key, tempo, meter, medium of performance, and intended duration).
episemaEpisema.
hispanTickHispanic tick.
signifLetSignificantive letter(s).
arpegIndicates that the notes of a chord are to be performed successively rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
beamSpanAlternative element for explicitly encoding beams, particularly those which extend across bar lines.
bendA variation in pitch (often micro-tonal) upwards or downwards during the course of a note.
bracketSpanMarks a sequence of notational events grouped by a bracket.
fermataAn indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
glissA continuous or sliding movement from one pitch to another, usually indicated by a straight or wavy line.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., < and >.
harpPedalHarp pedal diagram.
lvA "tie-like" indication that a note should ring beyond its written duration.
octaveAn indication that a passage should be performed one or more octaves above or below its written pitch.
pedalPiano pedal mark.
slurIndication of 1) a "unified melodic idea" or 2) performance technique.
tieAn indication that two notes of the same pitch form a single note with their combined rhythmic values.
tupletSpanAlternative element for encoding tuplets, especially useful for tuplets that extend across bar lines.
mordentAn ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
trillRapid alternation of a note with another (usually at the interval of a second above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
spContains an individual speech in a performance text.
stageDirContains any kind of stage direction within a dramatic text or fragment.
cpMarkA verbal or graphical indication to copy musical material written elsewhere.
metaMarkA graphical or textual statement with additional / explanatory information about the musical text. The textual consequences of this intervention are encoded independently via other means; that is, with elements such as add, del, etc.
fingAn individual finger in a fingering indication.
fingGrpA group of individual fingers in a fingering indication.
fSingle element of a figured bass indication.
harmAn indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
accidRecords a temporary alteration to the pitch of a note.
articAn indication of how to play a note or chord.
attaccaAn instruction to begin the next section or movement of a composition without pause.
dirAn instruction expressed as a combination of text and symbols, typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like tempo, dynam or repeatMark.
dotDot of augmentation or division.
dynamIndication of the volume of a note, phrase, or section of music.
ornamAn element indicating an ornament that is not a mordent, turn, or trill.
phraseIndication of 1) a "unified melodic idea" or 2) performance technique.
repeatMark An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
Common Music Notation (CMN) repertoire component declarations.
arpegIndicates that the notes of a chord are to be performed successively rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
attaccaAn instruction to begin the next section or movement of a composition without pause.
beamSpanAlternative element for explicitly encoding beams, particularly those which extend across bar lines.
beatRptAn indication that material on a preceding beat should be repeated.
bendA variation in pitch (often micro-tonal) upwards or downwards during the course of a note.
bracketSpanMarks a sequence of notational events grouped by a bracket.
fermataAn indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
glissA continuous or sliding movement from one pitch to another, usually indicated by a straight or wavy line.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., < and >.
harpPedalHarp pedal diagram.
lvA "tie-like" indication that a note should ring beyond its written duration.
measureUnit of musical time consisting of a fixed number of note values of a given type, as determined by the prevailing meter, and delimited in musical notation by bar lines.
octaveAn indication that a passage should be performed one or more octaves above or below its written pitch.
pedalPiano pedal mark.
repeatMark An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
slurIndication of 1) a "unified melodic idea" or 2) performance technique.
tieAn indication that two notes of the same pitch form a single note with their combined rhythmic values.
tupletSpanAlternative element for encoding tuplets, especially useful for tuplets that extend across bar lines.
CMN ornament component declarations.
mordentAn ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
trillRapid alternation of a note with another (usually at the interval of a second above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
Critical apparatus component declarations.
lemContains the lemma, or base text, of a textual variation.
rdgContains a single reading within a textual variation.
Dramatic text component declarations.
spContains an individual speech in a performance text.
stageDirContains any kind of stage direction within a dramatic text or fragment.
Editorial and transcriptional component declarations.
cpMarkA verbal or graphical indication to copy musical material written elsewhere.
metaMarkA graphical or textual statement with additional / explanatory information about the musical text. The textual consequences of this intervention are encoded independently via other means; that is, with elements such as add, del, etc.
Fingering component declarations.
fingAn individual finger in a fingering indication.
fingGrpA group of individual fingers in a fingering indication.
FRBR (Functional Requirements for Bibliographic Records) declarations.
itemSingle instance or exemplar of a source/manifestation.
manifestationA bibliographic description of a physical embodiment of an expression of a work.
Harmony component declarations.
fSingle element of a figured bass indication.
harmAn indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
Metadata header component declarations.
sourceA bibliographic description of a source used in the creation of the electronic file.
workProvides a detailed description of a work — a distinct intellectual or artistic creation — specifically its history, language use, and high-level musical attributes (e.g., key, tempo, meter, medium of performance, and intended duration).
Neume repertoire component declarations.
episemaEpisema.
hispanTickHispanic tick.
signifLetSignificantive letter(s).
Pointer and reference component declarations.
ptrDefines a traversible pointer to another location, using only attributes to describe the destination.
refDefines a traversible reference to another location. May contain text and sub-elements that describe the destination.
Component declarations that are shared between two or more modules.
accidRecords a temporary alteration to the pitch of a note.
analyticContains bibliographic elements describing an item (e.g., an article or poem) published within a monograph or journal and not as an independent publication.
annotProvides a statement explaining the text or indicating the basis for an assertion.
articAn indication of how to play a note or chord.
barLineVertical line drawn through one or more staves that divides musical notation into metrical units.
biblStructContains a bibliographic citation in which bibliographic sub-elements must appear in a specified order.
dirAn instruction expressed as a combination of text and symbols, typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like tempo, dynam or repeatMark.
dotDot of augmentation or division.
dynamIndication of the volume of a note, phrase, or section of music.
endingAlternative ending for a repeated passage of music; i.e., prima volta, seconda volta, etc.
expansionIndicates how a section may be programmatically expanded into its 'through-composed' form.
monogrContains bibliographic elements describing an item, for example, a published book or journal, score, recording, or an unpublished manuscript.
ornamAn element indicating an ornament that is not a mordent, turn, or trill.
phraseIndication of 1) a "unified melodic idea" or 2) performance technique.
relatedItemContains or references another bibliographic item which is related to the present one.
relationDescribes a relationship or linkage amongst entities.
sectionSegment of music data.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
User-defined symbols component declarations.
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
Declaration
<classSpec ident="att.targetEval" module="MEI.shared" type="atts">
<desc xml:lang="en">Attributes that deal with resolution of values in plist or target attributes.</desc>
<attList>
<attDef ident="evaluate" usage="opt">
<desc xml:lang="en">Specifies the intended meaning when a participant in a relationship is itself a pointer.</desc>
<valList type="closed">
<valItem ident="all">
<desc xml:lang="en">If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.</desc>
</valItem>
<valItem ident="one">
<desc xml:lang="en">If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.</desc>
</valItem>
<valItem ident="none">
<desc xml:lang="en">No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.</desc>
</valItem>
</valList>
<remarks xml:lang="en">
<p>If no value is given, the application program is responsible for deciding (possibly on the basis of user input) how far to trace a chain of pointers.</p>
</remarks>
</attDef>
</attList>
</classSpec>
MEI Version: 5.0(#eb14650)