att.controlEvent

Attributes shared by events which rely on other events for their existence. For example, a slur/phrase marking must be drawn between or over a group of notes. The slur is therefore a control event.
4.2.6 Timestamps and Durations
Module
MEI.shared
Attributes
evaluate, layer, part, partstaff, plist, staff, tstamp, tstamp.ges, tstamp.real, when
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
<att.controlEvent>att.targetEval@evaluate
layer(optional)Identifies the layer to which a feature applies. One or more values of datatype positiveInteger, separated by spaces.
<att.controlEvent>att.layerIdent@layer
part(optional)Indicates the part in which the current feature should appear. Use '%all' when the feature should occur in every part. One or more values of datatype a string matching the following regular expression: "(%all|#[\i][\c]+)" , separated by spaces.
<att.controlEvent>att.partIdent@part
partstaff(optional)Signifies the part staff on which a notated feature occurs. Use '%all' when the feature should occur on every staff. One or more values of datatype a string matching the following regular expression: "(%all|\d+(-\d+)?)" , separated by spaces.
<att.controlEvent>att.partIdent@partstaff
plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship. One or more values from data.URI, separated by spaces.
<att.controlEvent>att.plist@plist
staff(recommended)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable. One or more values of datatype positiveInteger, separated by spaces.
<att.controlEvent>att.staffIdent@staff
tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
<att.controlEvent>att.timestamp.log@tstamp
tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
<att.controlEvent>att.timestamp.ges@tstamp.ges
tstamp.real(optional)Records the onset time in terms of ISO time. Value conforms to data.ISOTIME.
<att.controlEvent>att.timestamp.ges@tstamp.real
when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a when element elsewhere in the document. Value conforms to data.URI.
<att.controlEvent>att.alignment@when
(MEI.performance) Temporal alignment attributes.
when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a when element elsewhere in the document. Value conforms to data.URI.
(MEI.shared) Attributes that identify the layer to which a feature applies.
layer(optional)Identifies the layer to which a feature applies. One or more values of datatype positiveInteger, separated by spaces.
(MEI.shared) Attributes for identifying the part in which the current feature appears.
part(optional)Indicates the part in which the current feature should appear. Use '%all' when the feature should occur in every part. One or more values of datatype a string matching the following regular expression: "(%all|#[\i][\c]+)" , separated by spaces.
partstaff(optional)Signifies the part staff on which a notated feature occurs. Use '%all' when the feature should occur on every staff. One or more values of datatype a string matching the following regular expression: "(%all|\d+(-\d+)?)" , separated by spaces.
(MEI.shared) Attributes listing the active participants in a user-defined collection.
plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship. One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes for identifying the staff associated with the current feature.
staff(recommended)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable. One or more values of datatype positiveInteger, separated by spaces.
(MEI.shared) Attributes that deal with resolution of values in plist or target attributes.
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
(MEI.shared) Attributes that record a time stamp in terms of musical time, , beats[.fractional beat part].
tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
(MEI.gestural) Attributes that record a performed (as opposed to notated) time stamp.
tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
tstamp.real(optional)Records the onset time in terms of ISO time. Value conforms to data.ISOTIME.
Gestural component declarations.
tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
tstamp.real(optional)Records the onset time in terms of ISO time. Value conforms to data.ISOTIME.
Performance component declarations.
when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a when element elsewhere in the document. Value conforms to data.URI.
Component declarations that are shared between two or more modules.
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
layer(optional)Identifies the layer to which a feature applies. One or more values of datatype positiveInteger, separated by spaces.
part(optional)Indicates the part in which the current feature should appear. Use '%all' when the feature should occur in every part. One or more values of datatype a string matching the following regular expression: "(%all|#[\i][\c]+)" , separated by spaces.
partstaff(optional)Signifies the part staff on which a notated feature occurs. Use '%all' when the feature should occur on every staff. One or more values of datatype a string matching the following regular expression: "(%all|\d+(-\d+)?)" , separated by spaces.
plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship. One or more values from data.URI, separated by spaces.
staff(recommended)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable. One or more values of datatype positiveInteger, separated by spaces.
tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
Available at
arpegIndicates that the notes of a chord are to be performed successively rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
beamSpanAlternative element for explicitly encoding beams, particularly those which extend across bar lines.
bendA variation in pitch (often micro-tonal) upwards or downwards during the course of a note.
bracketSpanMarks a sequence of notational events grouped by a bracket.
fermataAn indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
glissA continuous or sliding movement from one pitch to another, usually indicated by a straight or wavy line.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., < and >.
harpPedalHarp pedal diagram.
lvA "tie-like" indication that a note should ring beyond its written duration.
octaveAn indication that a passage should be performed one or more octaves above or below its written pitch.
pedalPiano pedal mark.
slurIndication of 1) a "unified melodic idea" or 2) performance technique.
tieAn indication that two notes of the same pitch form a single note with their combined rhythmic values.
tupletSpanAlternative element for encoding tuplets, especially useful for tuplets that extend across bar lines.
mordentAn ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
trillRapid alternation of a note with another (usually at the interval of a second above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
spContains an individual speech in a performance text.
stageDirContains any kind of stage direction within a dramatic text or fragment.
cpMarkA verbal or graphical indication to copy musical material written elsewhere.
metaMarkA graphical or textual statement with additional / explanatory information about the musical text. The textual consequences of this intervention are encoded independently via other means; that is, with elements such as add, del, etc.
fingAn individual finger in a fingering indication.
fingGrpA group of individual fingers in a fingering indication.
fSingle element of a figured bass indication.
harmAn indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
accidRecords a temporary alteration to the pitch of a note.
articAn indication of how to play a note or chord.
attaccaAn instruction to begin the next section or movement of a composition without pause.
dirAn instruction expressed as a combination of text and symbols, typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like tempo, dynam or repeatMark.
dotDot of augmentation or division.
dynamIndication of the volume of a note, phrase, or section of music.
ornamAn element indicating an ornament that is not a mordent, turn, or trill.
phraseIndication of 1) a "unified melodic idea" or 2) performance technique.
repeatMark An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
Common Music Notation (CMN) repertoire component declarations.
arpegIndicates that the notes of a chord are to be performed successively rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
attaccaAn instruction to begin the next section or movement of a composition without pause.
beamSpanAlternative element for explicitly encoding beams, particularly those which extend across bar lines.
bendA variation in pitch (often micro-tonal) upwards or downwards during the course of a note.
bracketSpanMarks a sequence of notational events grouped by a bracket.
fermataAn indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
glissA continuous or sliding movement from one pitch to another, usually indicated by a straight or wavy line.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., < and >.
harpPedalHarp pedal diagram.
lvA "tie-like" indication that a note should ring beyond its written duration.
octaveAn indication that a passage should be performed one or more octaves above or below its written pitch.
pedalPiano pedal mark.
repeatMark An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
slurIndication of 1) a "unified melodic idea" or 2) performance technique.
tieAn indication that two notes of the same pitch form a single note with their combined rhythmic values.
tupletSpanAlternative element for encoding tuplets, especially useful for tuplets that extend across bar lines.
CMN ornament component declarations.
mordentAn ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
trillRapid alternation of a note with another (usually at the interval of a second above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
Dramatic text component declarations.
spContains an individual speech in a performance text.
stageDirContains any kind of stage direction within a dramatic text or fragment.
Editorial and transcriptional component declarations.
cpMarkA verbal or graphical indication to copy musical material written elsewhere.
metaMarkA graphical or textual statement with additional / explanatory information about the musical text. The textual consequences of this intervention are encoded independently via other means; that is, with elements such as add, del, etc.
Fingering component declarations.
fingAn individual finger in a fingering indication.
fingGrpA group of individual fingers in a fingering indication.
Harmony component declarations.
fSingle element of a figured bass indication.
harmAn indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
Component declarations that are shared between two or more modules.
accidRecords a temporary alteration to the pitch of a note.
articAn indication of how to play a note or chord.
dirAn instruction expressed as a combination of text and symbols, typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like tempo, dynam or repeatMark.
dotDot of augmentation or division.
dynamIndication of the volume of a note, phrase, or section of music.
ornamAn element indicating an ornament that is not a mordent, turn, or trill.
phraseIndication of 1) a "unified melodic idea" or 2) performance technique.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
User-defined symbols component declarations.
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
Declaration
<classSpec ident="att.controlEvent" module="MEI.shared" type="atts">
<desc xml:lang="en">Attributes shared by events which rely on other events for their existence. For example, a slur/phrase marking must be drawn between or over a group of notes. The slur is therefore a control event.</desc>
<classes>
<memberOf key="att.alignment"/>
<memberOf key="att.layerIdent"/>
<memberOf key="att.partIdent"/>
<memberOf key="att.plist"/>
<memberOf key="att.staffIdent"/>
<memberOf key="att.targetEval"/>
<memberOf key="att.timestamp.log"/>
<memberOf key="att.timestamp.ges"/>
</classes>
</classSpec>
MEI Version: 5.0(#eb14650)