altsym(optional)Provides a way of pointing to a user-defined symbol. It must contain a reference to
an
ID of a symbolDef element elsewhere in the document.
Value conforms to data.URI.
class(optional)Contains one or more URIs which denote classification terms that apply to the entity
bearing this attribute.
One or more values from data.URI, separated by spaces.
color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color'
as used in pre-CMN notation.
Value conforms to data.COLOR.
copyof(optional)Points to an element of which the current element is a copy.
Value conforms to data.URI.
corresp(optional)Used to point to other elements that correspond to this one in a generic
fashion.
One or more values from data.URI, separated by spaces.
dir(required)Records the position of the piano damper pedal.
Allowed values are:
"down" (Depress the pedal.), "up" (Release the pedal.), "half" (Half pedal.), "bounce" (Release then immediately depress the pedal.)
endid(optional)Indicates the final element in a sequence of events to which the feature
applies.
Value conforms to data.URI.
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a
pointer.
Allowed values are:
"all" (If an element pointed to is itself a pointer, then the target of that pointer will
be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer
or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the
element(s) specified in plist or target attribute.)
facs(optional)Permits the current element to reference a facsimile surface or image zone which
corresponds to it.
One or more values from data.URI, separated by spaces.
follows(optional)points to one or more events in a user-defined collection that are known to be
predecessors of the current element.
One or more values from data.URI, separated by spaces.
fontfam(optional)Contains the name of a font-family.
Value conforms to data.FONTFAMILY.
fontname(optional)Holds the name of a font.
Value conforms to data.FONTNAME.
fontsize(optional)Indicates the size of a font expressed in printers' points, i.e., 1/72nd of an inch,
relative terms, e.g., "small", "larger", etc., or percentage values relative to "normal"
size, e.g., "125%".
Value conforms to data.FONTSIZE.
fontstyle(optional)Records the style of a font, i.e, italic, oblique, or normal.
Value conforms to data.FONTSTYLE.
fontweight(optional)Used to indicate bold type.
Value conforms to data.FONTWEIGHT.
form(optional)Determines whether piano pedal marks should be rendered as lines or as terms.
Allowed values are:
"line" (Continuous line with start and end positions rendered by vertical bars and bounces
shown by upward-pointing "blips".), "pedstar" (Pedal down and half pedal rendered with "Ped.", pedal up rendered by "*", pedal
"bounce" rendered with "* Ped.".), "altpedstar" (Pedal up and down indications same as with "pedstar", but bounce is rendered with
"Ped." only.)
func(optional)Indicates the function of the depressed pedal, but not necessarily the text associated
with its use. Use the dir element for such text.
Allowed values are:
"sustain" (The sustain pedal, also referred to as the "damper" pedal, allows the piano
strings to vibrate sympathetically with the struck strings. It is the right-most and
the most frequently used pedal on modern pianos.), "soft" (The soft pedal, sometimes called the "una corda", "piano", or "half-blow" pedal,
reduces the volume and modifies the timbre of the piano. On the modern piano, it is
the left-most pedal.), "sostenuto" (The sostenuto or tone-sustaining pedal allows notes already undamped to continue
to ring while other notes are damped normally; that is, on their release by the
fingers. This is usually the center pedal of the modern piano.), "silent" (The silent or practice pedal mutes the volume of the piano so that one may
practice quietly. It is sometimes a replacement for the sostenuto pedal, especially
on
an upright or vertical instrument.)
glyph.auth(optional)A name or label associated with the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Allowed values are:
"smufl" (Standard Music Font Layout.)
glyph.name(optional)Glyph name.
Value of datatype string.
glyph.num(optional)Numeric glyph reference in hexadecimal notation, e.g. "#xE000" or "U+E000". N.B. SMuFL
version 1.18 uses the range U+E000 - U+ECBF.
Value conforms to data.HEXNUM.
glyph.uri(optional)The web-accessible location of the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Value conforms to data.URI.
ho(optional)Records a horizontal adjustment to a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
label(optional)Captures text to be used to generate a label for the element to which it's attached,
a
"tool tip" or prefatory text, for example. Should not be used to record document
content.
Value of datatype string.
layer(optional)Identifies the layer to which a feature applies.
One or more values of datatype positiveInteger, separated by spaces.
lendsym.size(optional)Holds the relative size of the line-end symbol.
Value conforms to data.FONTSIZESCALE.
lform(optional)Describes the line style of a line.
Value conforms to data.LINEFORM.
lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided,
or
the number of "peaks" of a wavy line; a pair of space-separated values (minimum and
maximum, respectively) provides a range between which a rendering system-supplied
value
may fall, while a single value indicates a fixed amount of space; that is, the minimum
and
maximum values are equal.
One or two values of datatype
a positive integer no smaller than 2, separated by a space.
lstartsym(optional)Symbol rendered at start of line.
Value conforms to data.LINESTARTENDSYMBOL.
lstartsym.size(optional)Holds the relative size of the line-start symbol.
Value conforms to data.FONTSIZESCALE.
lwidth(optional)Width of a line.
Value conforms to data.LINEWIDTH.
n(optional)Provides a number-like designation that indicates an element's position in a sequence
of similar elements. May not contain space characters.
Value conforms to data.WORD.
next(optional)Used to point to the next event(s) in a user-defined collection.
One or more values from data.URI, separated by spaces.
part(optional)Indicates the part in which the current feature should appear. Use '%all' when the
feature should occur in every part.
One or more values of datatype
a string matching the following regular expression: "(%all|#[\i][\c]+)"
, separated by spaces.
partstaff(optional)Signifies the part staff on which a notated feature occurs. Use '%all' when the
feature should occur on every staff.
One or more values of datatype
a string matching the following regular expression: "(%all|\d+(-\d+)?)"
, separated by spaces.
place(optional)Captures the placement of the item with respect to the staff with which it is
associated.
Value conforms to data.STAFFREL.
plist(optional)When the target attribute is present, plist identifies the active participants; that
is, those entities pointed "from", in a relationship with the specified target(s).
When
the target attribute is not present, it identifies participants in a mutual
relationship.
One or more values from data.URI, separated by spaces.
precedes(optional)Points to one or more events in a user-defined collection that are known to be
successors of the current element.
One or more values from data.URI, separated by spaces.
prev(optional)Points to the previous event(s) in a user-defined collection.
One or more values from data.URI, separated by spaces.
resp(optional)Indicates the agent(s) responsible for some aspect of the text's transcription,
editing, or encoding. Its value must point to one or more identifiers declared in
the
document header.
One or more values from data.URI, separated by spaces.
sameas(optional)Points to an element that is the same as the current element but is not a literal
copy
of the current element.
One or more values from data.URI, separated by spaces.
staff(recommended)Signifies the staff on which a notated event occurs or to which a control event
applies. Mandatory when applicable.
One or more values of datatype positiveInteger, separated by spaces.
startid(optional)Holds a reference to the first element in a sequence of events to which the feature
applies.
Value conforms to data.URI.
synch(optional)Points to elements that are synchronous with the current element.
One or more values from data.URI, separated by spaces.
to(optional)Records a timestamp adjustment of a feature's programmatically-determined location
in
terms of musical time; that is, beats.
Value conforms to data.TSTAMPOFFSET.
tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part],
as expressed in the written time signature.
Value conforms to data.BEAT.
tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part],
as expressed in the written time signature.
Value conforms to data.BEAT.
tstamp.real(optional)Records the onset time in terms of ISO time.
Value conforms to data.ISOTIME.
tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location
in the ending measure.
Value conforms to data.MEASUREBEAT.
tstamp2.ges(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location
in the ending measure.
Value conforms to data.MEASUREBEAT.
tstamp2.real(optional)Records the ending point of an event in terms of ISO time.
Value conforms to data.ISOTIME.
type(optional)Designation which characterizes the element in some sense, using any convenient
classification scheme or typology that employs single-token labels.
One or more values of datatype NMTOKEN, separated by spaces.
vo(optional)Records the vertical adjustment of a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
when(optional)Indicates the point of occurrence of this feature along a time line. Its value must
be
the ID of a when element elsewhere in the document.
Value conforms to data.URI.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
xml:base(optional)Provides a base URI reference with which applications can resolve relative URI
references into absolute URI references.
Value conforms to data.URI.
xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it
and other resources. Each id attribute within a document must have a unique value.
Value of datatype ID.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
(MEI.shared) Attributes common to many elements.
(MEI.shared) Attributes that form the basis of the att.common class.
xml:base(optional)Provides a base URI reference with which applications can resolve relative URI
references into absolute URI references.
Value conforms to data.URI.
(MEI.shared) Attributes that uniquely identify an element.
xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it
and other resources. Each id attribute within a document must have a unique value.
Value of datatype ID.
(MEI.shared)
label(optional)Captures text to be used to generate a label for the element to which it's attached,
a
"tool tip" or prefatory text, for example. Should not be used to record document
content.
Value of datatype string.
(MEI.shared) Attributes that specify element-to-element relationships.
copyof(optional)Points to an element of which the current element is a copy.
Value conforms to data.URI.
corresp(optional)Used to point to other elements that correspond to this one in a generic
fashion.
One or more values from data.URI, separated by spaces.
follows(optional)points to one or more events in a user-defined collection that are known to be
predecessors of the current element.
One or more values from data.URI, separated by spaces.
next(optional)Used to point to the next event(s) in a user-defined collection.
One or more values from data.URI, separated by spaces.
precedes(optional)Points to one or more events in a user-defined collection that are known to be
successors of the current element.
One or more values from data.URI, separated by spaces.
prev(optional)Points to the previous event(s) in a user-defined collection.
One or more values from data.URI, separated by spaces.
sameas(optional)Points to an element that is the same as the current element but is not a literal
copy
of the current element.
One or more values from data.URI, separated by spaces.
synch(optional)Points to elements that are synchronous with the current element.
One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes used to supply a number-like designation for an element.
n(optional)Provides a number-like designation that indicates an element's position in a sequence
of similar elements. May not contain space characters.
Value conforms to data.WORD.
(MEI.shared) Attributes capturing information regarding responsibility for some aspect
of the text's creation, transcription, editing, or encoding.
resp(optional)Indicates the agent(s) responsible for some aspect of the text's transcription,
editing, or encoding. Its value must point to one or more identifiers declared in
the
document header.
One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes which can be used to classify features.
type(optional)Designation which characterizes the element in some sense, using any convenient
classification scheme or typology that employs single-token labels.
One or more values of datatype NMTOKEN, separated by spaces.
(MEI.shared) Attributes which can be used to classify features.
class(optional)Contains one or more URIs which denote classification terms that apply to the entity
bearing this attribute.
One or more values from data.URI, separated by spaces.
(MEI.facsimile) Attributes that associate a feature corresponding with all or part
of an image.
facs(optional)Permits the current element to reference a facsimile surface or image zone which
corresponds to it.
One or more values from data.URI, separated by spaces.
(MEI.cmn) Logical domain attributes.
dir(required)Records the position of the piano damper pedal.
Allowed values are:
"down" (Depress the pedal.), "up" (Release the pedal.), "half" (Half pedal.), "bounce" (Release then immediately depress the pedal.)
func(optional)Indicates the function of the depressed pedal, but not necessarily the text associated
with its use. Use the dir element for such text.
Allowed values are:
"sustain" (The sustain pedal, also referred to as the "damper" pedal, allows the piano
strings to vibrate sympathetically with the struck strings. It is the right-most and
the most frequently used pedal on modern pianos.), "soft" (The soft pedal, sometimes called the "una corda", "piano", or "half-blow" pedal,
reduces the volume and modifies the timbre of the piano. On the modern piano, it is
the left-most pedal.), "sostenuto" (The sostenuto or tone-sustaining pedal allows notes already undamped to continue
to ring while other notes are damped normally; that is, on their release by the
fingers. This is usually the center pedal of the modern piano.), "silent" (The silent or practice pedal mutes the volume of the piano so that one may
practice quietly. It is sometimes a replacement for the sostenuto pedal, especially
on
an upright or vertical instrument.)
(MEI.shared) Attributes shared by events which rely on other events for their existence.
For example, a slur/phrase marking must be drawn between or over a group of notes.
The slur is therefore a control event.
(MEI.performance) Temporal alignment attributes.
when(optional)Indicates the point of occurrence of this feature along a time line. Its value must
be
the ID of a when element elsewhere in the document.
Value conforms to data.URI.
(MEI.shared) Attributes that identify the layer to which a feature applies.
layer(optional)Identifies the layer to which a feature applies.
One or more values of datatype positiveInteger, separated by spaces.
(MEI.shared) Attributes for identifying the part in which the current feature appears.
part(optional)Indicates the part in which the current feature should appear. Use '%all' when the
feature should occur in every part.
One or more values of datatype
a string matching the following regular expression: "(%all|#[\i][\c]+)"
, separated by spaces.
partstaff(optional)Signifies the part staff on which a notated feature occurs. Use '%all' when the
feature should occur on every staff.
One or more values of datatype
a string matching the following regular expression: "(%all|\d+(-\d+)?)"
, separated by spaces.
(MEI.shared) Attributes listing the active participants in a user-defined collection.
plist(optional)When the target attribute is present, plist identifies the active participants; that
is, those entities pointed "from", in a relationship with the specified target(s).
When
the target attribute is not present, it identifies participants in a mutual
relationship.
One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes for identifying the staff associated with the current feature.
staff(recommended)Signifies the staff on which a notated event occurs or to which a control event
applies. Mandatory when applicable.
One or more values of datatype positiveInteger, separated by spaces.
(MEI.shared) Attributes that deal with resolution of values in plist or target attributes.
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a
pointer.
Allowed values are:
"all" (If an element pointed to is itself a pointer, then the target of that pointer will
be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer
or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the
element(s) specified in plist or target attribute.)
(MEI.shared) Attributes that record a time stamp in terms of musical time, i.e., beats[.fractional
beat part].
tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part],
as expressed in the written time signature.
Value conforms to data.BEAT.
(MEI.gestural) Attributes that record a performed (as opposed to notated) time stamp.
tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part],
as expressed in the written time signature.
Value conforms to data.BEAT.
tstamp.real(optional)Records the onset time in terms of ISO time.
Value conforms to data.ISOTIME.
(MEI.shared) Attributes recording the identifiers of the first and last elements of
a sequence of elements to which the current element is associated.
endid(optional)Indicates the final element in a sequence of events to which the feature
applies.
Value conforms to data.URI.
(MEI.shared) Attributes that identify a relative starting point.
startid(optional)Holds a reference to the first element in a sequence of events to which the feature
applies.
Value conforms to data.URI.
(MEI.shared) Attributes that record a time stamp for the end of an event in terms
of musical time.
tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location
in the ending measure.
Value conforms to data.MEASUREBEAT.
(MEI.visual) Visual domain attributes. The place attribute captures the placement
of the pedal marking with respect to the staff with which it is associated. Modern
publishing standards require the place to be 'below'; however, for transcriptions
of manuscript works, this attribute class allows the full range of values.
form(optional)Determines whether piano pedal marks should be rendered as lines or as terms.
Allowed values are:
"line" (Continuous line with start and end positions rendered by vertical bars and bounces
shown by upward-pointing "blips".), "pedstar" (Pedal down and half pedal rendered with "Ped.", pedal up rendered by "*", pedal
"bounce" rendered with "* Ped.".), "altpedstar" (Pedal up and down indications same as with "pedstar", but bounce is rendered with
"Ped." only.)
(MEI.usersymbols) Attributes supplying pointers to user-defined symbols.
altsym(optional)Provides a way of pointing to a user-defined symbol. It must contain a reference to
an
ID of a symbolDef element elsewhere in the document.
Value conforms to data.URI.
(MEI.shared) Visual color attributes.
color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color'
as used in pre-CMN notation.
Value conforms to data.COLOR.
(MEI.externalsymbols) Attributes used to associate MEI features with corresponding
glyphs in an externally-defined standard such as SMuFL.
glyph.auth(optional)A name or label associated with the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Allowed values are:
"smufl" (Standard Music Font Layout.)
glyph.name(optional)Glyph name.
Value of datatype string.
glyph.num(optional)Numeric glyph reference in hexadecimal notation, e.g. "#xE000" or "U+E000". N.B. SMuFL
version 1.18 uses the range U+E000 - U+ECBF.
Value conforms to data.HEXNUM.
glyph.uri(optional)The web-accessible location of the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Value conforms to data.URI.
(MEI.shared) Attributes that record the visual rendition of lines.
lendsym.size(optional)Holds the relative size of the line-end symbol.
Value conforms to data.FONTSIZESCALE.
lstartsym(optional)Symbol rendered at start of line.
Value conforms to data.LINESTARTENDSYMBOL.
lstartsym.size(optional)Holds the relative size of the line-start symbol.
Value conforms to data.FONTSIZESCALE.
(MEI.shared) Attributes that record the basic visual rendition of lines.
lform(optional)Describes the line style of a line.
Value conforms to data.LINEFORM.
lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided,
or
the number of "peaks" of a wavy line; a pair of space-separated values (minimum and
maximum, respectively) provides a range between which a rendering system-supplied
value
may fall, while a single value indicates a fixed amount of space; that is, the minimum
and
maximum values are equal.
One or two values of datatype
a positive integer no smaller than 2, separated by a space.
lwidth(optional)Width of a line.
Value conforms to data.LINEWIDTH.
place(optional)Captures the placement of the item with respect to the staff with which it is
associated.
Value conforms to data.STAFFREL.
(MEI.shared) Typographical attributes.
fontfam(optional)Contains the name of a font-family.
Value conforms to data.FONTFAMILY.
fontname(optional)Holds the name of a font.
Value conforms to data.FONTNAME.
fontsize(optional)Indicates the size of a font expressed in printers' points, i.e., 1/72nd of an inch,
relative terms, e.g., "small", "larger", etc., or percentage values relative to "normal"
size, e.g., "125%".
Value conforms to data.FONTSIZE.
fontstyle(optional)Records the style of a font, i.e, italic, oblique, or normal.
Value conforms to data.FONTSTYLE.
fontweight(optional)Used to indicate bold type.
Value conforms to data.FONTWEIGHT.
(MEI.shared) Visual offset attributes. Some items may have their location recorded
in terms of offsets from their programmatically-determined location. The ho attribute
records the horizontal offset while vo records the vertical. The to attribute holds
a timestamp offset, the most common use of which is as an alternative to the ho attribute.
(MEI.shared) Horizontal offset attributes.
ho(optional)Records a horizontal adjustment to a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
(MEI.shared) Horizontal offset attributes specified in terms of time.
to(optional)Records a timestamp adjustment of a feature's programmatically-determined location
in
terms of musical time; that is, beats.
Value conforms to data.TSTAMPOFFSET.
(MEI.shared) Vertical offset attributes.
vo(optional)Records the vertical adjustment of a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
(MEI.shared) Output coordinate attributes. Some elements may have their exact rendered
*output* coordinates recorded. x and y attributes indicate where to place the rendered
output. Recording the coordinates of a feature in a facsimile requires the use of
the facs attribute.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
(MEI.gestural) Gestural domain attributes.
(MEI.gestural) Attributes that record a performed (as opposed to notated) time stamp
for the end of an event.
tstamp2.ges(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location
in the ending measure.
Value conforms to data.MEASUREBEAT.
tstamp2.real(optional)Records the ending point of an event in terms of ISO time.
Value conforms to data.ISOTIME.
(MEI.analytical) Analytical domain attributes.
Common Music Notation (CMN) repertoire component declarations.
dir(required)Records the position of the piano damper pedal.
Allowed values are:
"down" (Depress the pedal.), "up" (Release the pedal.), "half" (Half pedal.), "bounce" (Release then immediately depress the pedal.)
func(optional)Indicates the function of the depressed pedal, but not necessarily the text associated
with its use. Use the dir element for such text.
Allowed values are:
"sustain" (The sustain pedal, also referred to as the "damper" pedal, allows the piano
strings to vibrate sympathetically with the struck strings. It is the right-most and
the most frequently used pedal on modern pianos.), "soft" (The soft pedal, sometimes called the "una corda", "piano", or "half-blow" pedal,
reduces the volume and modifies the timbre of the piano. On the modern piano, it is
the left-most pedal.), "sostenuto" (The sostenuto or tone-sustaining pedal allows notes already undamped to continue
to ring while other notes are damped normally; that is, on their release by the
fingers. This is usually the center pedal of the modern piano.), "silent" (The silent or practice pedal mutes the volume of the piano so that one may
practice quietly. It is sometimes a replacement for the sostenuto pedal, especially
on
an upright or vertical instrument.)
External symbols component declarations.
glyph.auth(optional)A name or label associated with the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Allowed values are:
"smufl" (Standard Music Font Layout.)
glyph.name(optional)Glyph name.
Value of datatype string.
glyph.num(optional)Numeric glyph reference in hexadecimal notation, e.g. "#xE000" or "U+E000". N.B. SMuFL
version 1.18 uses the range U+E000 - U+ECBF.
Value conforms to data.HEXNUM.
glyph.uri(optional)The web-accessible location of the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Value conforms to data.URI.
Facsimile component declarations.
facs(optional)Permits the current element to reference a facsimile surface or image zone which
corresponds to it.
One or more values from data.URI, separated by spaces.
Gestural component declarations.
tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part],
as expressed in the written time signature.
Value conforms to data.BEAT.
tstamp.real(optional)Records the onset time in terms of ISO time.
Value conforms to data.ISOTIME.
tstamp2.ges(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location
in the ending measure.
Value conforms to data.MEASUREBEAT.
tstamp2.real(optional)Records the ending point of an event in terms of ISO time.
Value conforms to data.ISOTIME.
Performance component declarations.
when(optional)Indicates the point of occurrence of this feature along a time line. Its value must
be
the ID of a when element elsewhere in the document.
Value conforms to data.URI.
Component declarations that are shared between two or more modules.
class(optional)Contains one or more URIs which denote classification terms that apply to the entity
bearing this attribute.
One or more values from data.URI, separated by spaces.
color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color'
as used in pre-CMN notation.
Value conforms to data.COLOR.
copyof(optional)Points to an element of which the current element is a copy.
Value conforms to data.URI.
corresp(optional)Used to point to other elements that correspond to this one in a generic
fashion.
One or more values from data.URI, separated by spaces.
endid(optional)Indicates the final element in a sequence of events to which the feature
applies.
Value conforms to data.URI.
evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a
pointer.
Allowed values are:
"all" (If an element pointed to is itself a pointer, then the target of that pointer will
be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer
or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the
element(s) specified in plist or target attribute.)
follows(optional)points to one or more events in a user-defined collection that are known to be
predecessors of the current element.
One or more values from data.URI, separated by spaces.
fontfam(optional)Contains the name of a font-family.
Value conforms to data.FONTFAMILY.
fontname(optional)Holds the name of a font.
Value conforms to data.FONTNAME.
fontsize(optional)Indicates the size of a font expressed in printers' points, i.e., 1/72nd of an inch,
relative terms, e.g., "small", "larger", etc., or percentage values relative to "normal"
size, e.g., "125%".
Value conforms to data.FONTSIZE.
fontstyle(optional)Records the style of a font, i.e, italic, oblique, or normal.
Value conforms to data.FONTSTYLE.
fontweight(optional)Used to indicate bold type.
Value conforms to data.FONTWEIGHT.
ho(optional)Records a horizontal adjustment to a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
label(optional)Captures text to be used to generate a label for the element to which it's attached,
a
"tool tip" or prefatory text, for example. Should not be used to record document
content.
Value of datatype string.
layer(optional)Identifies the layer to which a feature applies.
One or more values of datatype positiveInteger, separated by spaces.
lendsym.size(optional)Holds the relative size of the line-end symbol.
Value conforms to data.FONTSIZESCALE.
lform(optional)Describes the line style of a line.
Value conforms to data.LINEFORM.
lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided,
or
the number of "peaks" of a wavy line; a pair of space-separated values (minimum and
maximum, respectively) provides a range between which a rendering system-supplied
value
may fall, while a single value indicates a fixed amount of space; that is, the minimum
and
maximum values are equal.
One or two values of datatype
a positive integer no smaller than 2, separated by a space.
lstartsym(optional)Symbol rendered at start of line.
Value conforms to data.LINESTARTENDSYMBOL.
lstartsym.size(optional)Holds the relative size of the line-start symbol.
Value conforms to data.FONTSIZESCALE.
lwidth(optional)Width of a line.
Value conforms to data.LINEWIDTH.
n(optional)Provides a number-like designation that indicates an element's position in a sequence
of similar elements. May not contain space characters.
Value conforms to data.WORD.
next(optional)Used to point to the next event(s) in a user-defined collection.
One or more values from data.URI, separated by spaces.
part(optional)Indicates the part in which the current feature should appear. Use '%all' when the
feature should occur in every part.
One or more values of datatype
a string matching the following regular expression: "(%all|#[\i][\c]+)"
, separated by spaces.
partstaff(optional)Signifies the part staff on which a notated feature occurs. Use '%all' when the
feature should occur on every staff.
One or more values of datatype
a string matching the following regular expression: "(%all|\d+(-\d+)?)"
, separated by spaces.
place(optional)Captures the placement of the item with respect to the staff with which it is
associated.
Value conforms to data.STAFFREL.
plist(optional)When the target attribute is present, plist identifies the active participants; that
is, those entities pointed "from", in a relationship with the specified target(s).
When
the target attribute is not present, it identifies participants in a mutual
relationship.
One or more values from data.URI, separated by spaces.
precedes(optional)Points to one or more events in a user-defined collection that are known to be
successors of the current element.
One or more values from data.URI, separated by spaces.
prev(optional)Points to the previous event(s) in a user-defined collection.
One or more values from data.URI, separated by spaces.
resp(optional)Indicates the agent(s) responsible for some aspect of the text's transcription,
editing, or encoding. Its value must point to one or more identifiers declared in
the
document header.
One or more values from data.URI, separated by spaces.
sameas(optional)Points to an element that is the same as the current element but is not a literal
copy
of the current element.
One or more values from data.URI, separated by spaces.
staff(recommended)Signifies the staff on which a notated event occurs or to which a control event
applies. Mandatory when applicable.
One or more values of datatype positiveInteger, separated by spaces.
startid(optional)Holds a reference to the first element in a sequence of events to which the feature
applies.
Value conforms to data.URI.
synch(optional)Points to elements that are synchronous with the current element.
One or more values from data.URI, separated by spaces.
to(optional)Records a timestamp adjustment of a feature's programmatically-determined location
in
terms of musical time; that is, beats.
Value conforms to data.TSTAMPOFFSET.
tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part],
as expressed in the written time signature.
Value conforms to data.BEAT.
tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location
in the ending measure.
Value conforms to data.MEASUREBEAT.
type(optional)Designation which characterizes the element in some sense, using any convenient
classification scheme or typology that employs single-token labels.
One or more values of datatype NMTOKEN, separated by spaces.
vo(optional)Records the vertical adjustment of a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
xml:base(optional)Provides a base URI reference with which applications can resolve relative URI
references into absolute URI references.
Value conforms to data.URI.
xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it
and other resources. Each id attribute within a document must have a unique value.
Value of datatype ID.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
User-defined symbols component declarations.
altsym(optional)Provides a way of pointing to a user-defined symbol. It must contain a reference to
an
ID of a symbolDef element elsewhere in the document.
Value conforms to data.URI.
Visual component declarations.
form(optional)Determines whether piano pedal marks should be rendered as lines or as terms.
Allowed values are:
"line" (Continuous line with start and end positions rendered by vertical bars and bounces
shown by upward-pointing "blips".), "pedstar" (Pedal down and half pedal rendered with "Ped.", pedal up rendered by "*", pedal
"bounce" rendered with "* Ped.".), "altpedstar" (Pedal up and down indications same as with "pedstar", but bounce is rendered with
"Ped." only.)
(MEI.cmn) Groups control events that appear in CMN.
(MEI.cmn) Groups elements that may appear within a CMN measure.
measureUnit of musical time consisting of a fixed number of note values of a given type,
as
determined by the prevailing meter, and delimited in musical notation by bar lines.
(MEI.critapp) Groups elements that may appear as part of a musical variant.
(MEI.critapp) Groups elements that may appear as part of a textual or musical variant.
lem(lemma) – Contains the lemma, or base text, of a textual variation.
rdg(reading) – Contains a single reading within a textual variation.
(MEI.edittrans) Groups elements that may appear as part of editorial and transcription
elements in music notation.
(MEI.edittrans) Groups elements that may appear as part of editorial and transcription
elements.
abbr(abbreviation) – A generic element for 1) a shortened form of a word, including an
acronym
or 2) a shorthand notation.
corr(correction) – Contains the correct form of an apparent erroneous passage.
damageContains an area of damage to the physical medium.
del(deletion) – Contains information deleted, marked as deleted, or otherwise indicated
as
superfluous or spurious in the copy text by an author, scribe, annotator, or corrector.
expan(expansion) – Contains the expansion of an abbreviation.
orig(original) – Contains material which is marked as following the original, rather than
being normalized or corrected.
reg(regularization) – Contains material which has been regularized or normalized in some
sense.
restoreIndicates restoration of material to an earlier state by cancellation of an editorial
or
authorial marking or instruction.
sicContains apparently incorrect or inaccurate material.
suppliedContains material supplied by the transcriber or editor for any reason.
unclearContains material that cannot be transcribed with certainty because it is illegible
or
inaudible in the source.
Common Music Notation (CMN) repertoire component declarations.
measureUnit of musical time consisting of a fixed number of note values of a given type,
as
determined by the prevailing meter, and delimited in musical notation by bar lines.
Critical apparatus component declarations.
lem(lemma) – Contains the lemma, or base text, of a textual variation.
rdg(reading) – Contains a single reading within a textual variation.
Editorial and transcriptional component declarations.
abbr(abbreviation) – A generic element for 1) a shortened form of a word, including an
acronym
or 2) a shorthand notation.
corr(correction) – Contains the correct form of an apparent erroneous passage.
damageContains an area of damage to the physical medium.
del(deletion) – Contains information deleted, marked as deleted, or otherwise indicated
as
superfluous or spurious in the copy text by an author, scribe, annotator, or corrector.
expan(expansion) – Contains the expansion of an abbreviation.
orig(original) – Contains material which is marked as following the original, rather than
being normalized or corrected.
reg(regularization) – Contains material which has been regularized or normalized in some
sense.
restoreIndicates restoration of material to an earlier state by cancellation of an editorial
or
authorial marking or instruction.
sicContains apparently incorrect or inaccurate material.
suppliedContains material supplied by the transcriber or editor for any reason.
unclearContains material that cannot be transcribed with certainty because it is illegible
or
inaudible in the source.
May Contain
– (<pedal> may not have child elements)
Remarks
The starting point of the pedal mark may be indicated by either a startid,
tstamp, tstamp.ges, or tstamp.real attribute. It is a
semantic error not to specify one of these attributes.
Must have one of the attributes: startid, tstamp, tstamp.ges or tstamp.real.
<sch:rule context="mei:pedal">
<sch:assert test="@startid or @tstamp or @tstamp.ges or @tstamp.real">Must have one of the
attributes: startid, tstamp, tstamp.ges or tstamp.real.</sch:assert>
<sch:assert test="@startid or @tstamp or @tstamp.ges or @tstamp.real">Must have one of the
attributes: startid, tstamp, tstamp.ges or tstamp.real.</sch:assert>
</sch:rule>
</constraint>
</constraintSpec>
<remarks>
<p part="N">The starting point of the pedal mark may be indicated by either a
<att scheme="TEI">startid</att>
,
<att scheme="TEI">tstamp</att>
,
<att scheme="TEI">tstamp.ges</att>
, or
<att scheme="TEI">tstamp.real</att>
attribute. It is a
semantic error not to specify one of these attributes.</p>