Visual domain attributes. The place attribute captures the placement of the pedal
marking
with respect to the staff with which it is associated. Modern publishing standards
require the
place to be 'below'; however, for transcriptions of manuscript works, this attribute
class
allows the full range of values.
altsym(optional)Provides a way of pointing to a user-defined symbol. It must contain a reference to
an
ID of a symbolDef element elsewhere in the document.
Value conforms to data.URI.
color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color'
as used in pre-CMN notation.
Value conforms to data.COLOR.
fontfam(optional)Contains the name of a font-family.
Value conforms to data.FONTFAMILY.
fontname(optional)Holds the name of a font.
Value conforms to data.FONTNAME.
fontsize(optional)Indicates the size of a font expressed in printers' points, i.e., 1/72nd of an inch,
relative terms, e.g., "small", "larger", etc., or percentage values relative to "normal"
size, e.g., "125%".
Value conforms to data.FONTSIZE.
fontstyle(optional)Records the style of a font, i.e, italic, oblique, or normal.
Value conforms to data.FONTSTYLE.
fontweight(optional)Used to indicate bold type.
Value conforms to data.FONTWEIGHT.
form(optional)Determines whether piano pedal marks should be rendered as lines or as terms.
Allowed values are:
"line" (Continuous line with start and end positions rendered by vertical bars and bounces
shown by upward-pointing "blips".), "pedstar" (Pedal down and half pedal rendered with "Ped.", pedal up rendered by "*", pedal
"bounce" rendered with "* Ped.".), "altpedstar" (Pedal up and down indications same as with "pedstar", but bounce is rendered with
"Ped." only.)
glyph.auth(optional)A name or label associated with the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Allowed values are:
"smufl" (Standard Music Font Layout.)
glyph.name(optional)Glyph name.
Value of datatype string.
glyph.num(optional)Numeric glyph reference in hexadecimal notation, e.g. "#xE000" or "U+E000". N.B. SMuFL
version 1.18 uses the range U+E000 - U+ECBF.
Value conforms to data.HEXNUM.
glyph.uri(optional)The web-accessible location of the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Value conforms to data.URI.
ho(optional)Records a horizontal adjustment to a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
lendsym.size(optional)Holds the relative size of the line-end symbol.
Value conforms to data.FONTSIZESCALE.
lform(optional)Describes the line style of a line.
Value conforms to data.LINEFORM.
lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided,
or
the number of "peaks" of a wavy line; a pair of space-separated values (minimum and
maximum, respectively) provides a range between which a rendering system-supplied
value
may fall, while a single value indicates a fixed amount of space; that is, the minimum
and
maximum values are equal.
One or two values of datatype
a positive integer no smaller than 2, separated by a space.
lstartsym(optional)Symbol rendered at start of line.
Value conforms to data.LINESTARTENDSYMBOL.
lstartsym.size(optional)Holds the relative size of the line-start symbol.
Value conforms to data.FONTSIZESCALE.
lwidth(optional)Width of a line.
Value conforms to data.LINEWIDTH.
place(optional)Captures the placement of the item with respect to the staff with which it is
associated.
Value conforms to data.STAFFREL.
to(optional)Records a timestamp adjustment of a feature's programmatically-determined location
in
terms of musical time; that is, beats.
Value conforms to data.TSTAMPOFFSET.
vo(optional)Records the vertical adjustment of a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
form(optional)Determines whether piano pedal marks should be rendered as lines or as terms.
Allowed values are:
"line" (Continuous line with start and end positions rendered by vertical bars and bounces
shown by upward-pointing "blips".), "pedstar" (Pedal down and half pedal rendered with "Ped.", pedal up rendered by "*", pedal
"bounce" rendered with "* Ped.".), "altpedstar" (Pedal up and down indications same as with "pedstar", but bounce is rendered with
"Ped." only.)
(MEI.usersymbols) Attributes supplying pointers to user-defined symbols.
altsym(optional)Provides a way of pointing to a user-defined symbol. It must contain a reference to
an
ID of a symbolDef element elsewhere in the document.
Value conforms to data.URI.
(MEI.shared) Visual color attributes.
color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color'
as used in pre-CMN notation.
Value conforms to data.COLOR.
(MEI.externalsymbols) Attributes used to associate MEI features with corresponding
glyphs in an externally-defined standard such as SMuFL.
glyph.auth(optional)A name or label associated with the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Allowed values are:
"smufl" (Standard Music Font Layout.)
glyph.name(optional)Glyph name.
Value of datatype string.
glyph.num(optional)Numeric glyph reference in hexadecimal notation, e.g. "#xE000" or "U+E000". N.B. SMuFL
version 1.18 uses the range U+E000 - U+ECBF.
Value conforms to data.HEXNUM.
glyph.uri(optional)The web-accessible location of the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Value conforms to data.URI.
(MEI.shared) Attributes that record the visual rendition of lines.
lendsym.size(optional)Holds the relative size of the line-end symbol.
Value conforms to data.FONTSIZESCALE.
lstartsym(optional)Symbol rendered at start of line.
Value conforms to data.LINESTARTENDSYMBOL.
lstartsym.size(optional)Holds the relative size of the line-start symbol.
Value conforms to data.FONTSIZESCALE.
(MEI.shared) Attributes that record the basic visual rendition of lines.
lform(optional)Describes the line style of a line.
Value conforms to data.LINEFORM.
lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided,
or
the number of "peaks" of a wavy line; a pair of space-separated values (minimum and
maximum, respectively) provides a range between which a rendering system-supplied
value
may fall, while a single value indicates a fixed amount of space; that is, the minimum
and
maximum values are equal.
One or two values of datatype
a positive integer no smaller than 2, separated by a space.
lwidth(optional)Width of a line.
Value conforms to data.LINEWIDTH.
place(optional)Captures the placement of the item with respect to the staff with which it is
associated.
Value conforms to data.STAFFREL.
(MEI.shared) Typographical attributes.
fontfam(optional)Contains the name of a font-family.
Value conforms to data.FONTFAMILY.
fontname(optional)Holds the name of a font.
Value conforms to data.FONTNAME.
fontsize(optional)Indicates the size of a font expressed in printers' points, i.e., 1/72nd of an inch,
relative terms, e.g., "small", "larger", etc., or percentage values relative to "normal"
size, e.g., "125%".
Value conforms to data.FONTSIZE.
fontstyle(optional)Records the style of a font, i.e, italic, oblique, or normal.
Value conforms to data.FONTSTYLE.
fontweight(optional)Used to indicate bold type.
Value conforms to data.FONTWEIGHT.
(MEI.shared) Visual offset attributes. Some items may have their location recorded
in terms of offsets from their programmatically-determined location. The ho attribute
records the horizontal offset while vo records the vertical. The to attribute holds
a timestamp offset, the most common use of which is as an alternative to the ho attribute.
(MEI.shared) Horizontal offset attributes.
ho(optional)Records a horizontal adjustment to a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
(MEI.shared) Horizontal offset attributes specified in terms of time.
to(optional)Records a timestamp adjustment of a feature's programmatically-determined location
in
terms of musical time; that is, beats.
Value conforms to data.TSTAMPOFFSET.
(MEI.shared) Vertical offset attributes.
vo(optional)Records the vertical adjustment of a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
(MEI.shared) Output coordinate attributes. Some elements may have their exact rendered
*output* coordinates recorded. x and y attributes indicate where to place the rendered
output. Recording the coordinates of a feature in a facsimile requires the use of
the facs attribute.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
External symbols component declarations.
glyph.auth(optional)A name or label associated with the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Allowed values are:
"smufl" (Standard Music Font Layout.)
glyph.name(optional)Glyph name.
Value of datatype string.
glyph.num(optional)Numeric glyph reference in hexadecimal notation, e.g. "#xE000" or "U+E000". N.B. SMuFL
version 1.18 uses the range U+E000 - U+ECBF.
Value conforms to data.HEXNUM.
glyph.uri(optional)The web-accessible location of the controlled vocabulary from which the value of
glyph.name or glyph.num is taken.
Value conforms to data.URI.
Component declarations that are shared between two or more modules.
color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color'
as used in pre-CMN notation.
Value conforms to data.COLOR.
fontfam(optional)Contains the name of a font-family.
Value conforms to data.FONTFAMILY.
fontname(optional)Holds the name of a font.
Value conforms to data.FONTNAME.
fontsize(optional)Indicates the size of a font expressed in printers' points, i.e., 1/72nd of an inch,
relative terms, e.g., "small", "larger", etc., or percentage values relative to "normal"
size, e.g., "125%".
Value conforms to data.FONTSIZE.
fontstyle(optional)Records the style of a font, i.e, italic, oblique, or normal.
Value conforms to data.FONTSTYLE.
fontweight(optional)Used to indicate bold type.
Value conforms to data.FONTWEIGHT.
ho(optional)Records a horizontal adjustment to a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
lendsym.size(optional)Holds the relative size of the line-end symbol.
Value conforms to data.FONTSIZESCALE.
lform(optional)Describes the line style of a line.
Value conforms to data.LINEFORM.
lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided,
or
the number of "peaks" of a wavy line; a pair of space-separated values (minimum and
maximum, respectively) provides a range between which a rendering system-supplied
value
may fall, while a single value indicates a fixed amount of space; that is, the minimum
and
maximum values are equal.
One or two values of datatype
a positive integer no smaller than 2, separated by a space.
lstartsym(optional)Symbol rendered at start of line.
Value conforms to data.LINESTARTENDSYMBOL.
lstartsym.size(optional)Holds the relative size of the line-start symbol.
Value conforms to data.FONTSIZESCALE.
lwidth(optional)Width of a line.
Value conforms to data.LINEWIDTH.
place(optional)Captures the placement of the item with respect to the staff with which it is
associated.
Value conforms to data.STAFFREL.
to(optional)Records a timestamp adjustment of a feature's programmatically-determined location
in
terms of musical time; that is, beats.
Value conforms to data.TSTAMPOFFSET.
vo(optional)Records the vertical adjustment of a feature's programmatically-determined location
in
terms of staff interline distance; that is, in units of 1/2 the distance between adjacent
staff lines.
Value conforms to data.MEASUREMENTREL.
x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is
necessary to record the placement of a feature in a facsimile image, use the facs
attribute.
Value of datatype decimal.
User-defined symbols component declarations.
altsym(optional)Provides a way of pointing to a user-defined symbol. It must contain a reference to
an
ID of a symbolDef element elsewhere in the document.
Value conforms to data.URI.
Visual component declarations.
form(optional)Determines whether piano pedal marks should be rendered as lines or as terms.
Allowed values are:
"line" (Continuous line with start and end positions rendered by vertical bars and bounces
shown by upward-pointing "blips".), "pedstar" (Pedal down and half pedal rendered with "Ped.", pedal up rendered by "*", pedal
"bounce" rendered with "* Ped.".), "altpedstar" (Pedal up and down indications same as with "pedstar", but bounce is rendered with
"Ped." only.)
<desc>Visual domain attributes. The place attribute captures the placement of the pedal
marking
with respect to the staff with which it is associated. Modern publishing standards
require the
place to be 'below'; however, for transcriptions of manuscript works, this attribute
class
allows the full range of values.</desc>