att.placement

Attributes capturing placement information.
Module
MEI.shared
Attributes
place
place(optional)Captures the placement of the item with respect to the staff with which it is associated. Value conforms to data.STAFFREL.
place(optional)Captures the placement of the item with respect to the staff with which it is associated. Value conforms to data.STAFFREL.
Component declarations that are shared between two or more modules.
place(optional)Captures the placement of the item with respect to the staff with which it is associated. Value conforms to data.STAFFREL.
Available at
mNum(measure number) – Designation, name, or label for a measure, often but not always consisting of digits. Use this element when the n attribute on measure does not adequately capture the appearance or placement of the measure number/label.
metaMarkA graphical or textual statement with additional / explanatory information about the musical text. The textual consequences of this intervention are encoded independently via other means; that is, with elements such as <add>, <del>, etc.
accid(accidental) – Records a temporary alteration to the pitch of a note.
artic(articulation) – An indication of how to play a note or chord.
attaccaAn instruction to begin the next section or movement of a composition without pause.
breath(breath mark) – An indication of a point at which the performer on an instrument requiring breath (including the voice) may breathe.
caesuraBreak, pause, or interruption in the normal tempo of a composition. Typically indicated by "railroad tracks", i.e., two diagonal slashes.
cpMark(copy/colla parte mark) – A verbal or graphical indication to copy musical material written elsewhere.
dir(directive) – An instruction expressed as a combination of text and symbols — such as segno and coda symbols, fermatas over a bar line, etc., typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like tempo or dynam.
dynam(dynamic) – Indication of the volume of a note, phrase, or section of music.
f(figure) – Single element of a figured bass indication.
fermataAn indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
fingfinger – An individual finger in a fingering indication.
fingGrp(finger group)– A group of individual fingers in a fingering indication.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g. < and >.
harm(harmony) – An indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
harpPedal(harp pedal) – Harp pedal diagram.
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
lg(line group) – May be used for any section of text that is organized as a group of lines; however, it is most often used for a group of verse lines functioning as a formal unit, e.g. a stanza, refrain, verse paragraph, etc.
mordentAn ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
ornamAn element indicating an ornament that is not a mordent, turn, or trill.
pedalPiano pedal mark.
refrainRecurring lyrics, especially at the end of each verse or stanza of a poem or song lyrics; a chorus.
reh(rehearsal mark) – In an orchestral score and its corresponding parts, a mark indicating a convenient point from which to resume rehearsal after a break.
sp(speech) – Contains an individual speech in a performance text.
stageDir(stage direction) – Contains any kind of stage direction within a dramatic text or fragment.
syl(syllable) – Individual lyric syllable.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
trillRapid alternation of a note with another (usually at the interval of a second above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
verseDivision of a poem or song lyrics, sometimes having a fixed length, meter or rhyme scheme; a stanza.
mNum(measure number) – Designation, name, or label for a measure, often but not always consisting of digits. Use this element when the n attribute on measure does not adequately capture the appearance or placement of the measure number/label.
attaccaAn instruction to begin the next section or movement of a composition without pause.
breath(breath mark) – An indication of a point at which the performer on an instrument requiring breath (including the voice) may breathe.
fermataAn indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g. < and >.
harpPedal(harp pedal) – Harp pedal diagram.
pedalPiano pedal mark.
reh(rehearsal mark) – In an orchestral score and its corresponding parts, a mark indicating a convenient point from which to resume rehearsal after a break.
mordentAn ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
trillRapid alternation of a note with another (usually at the interval of a second above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
sp(speech) – Contains an individual speech in a performance text.
stageDir(stage direction) – Contains any kind of stage direction within a dramatic text or fragment.
metaMarkA graphical or textual statement with additional / explanatory information about the musical text. The textual consequences of this intervention are encoded independently via other means; that is, with elements such as <add>, <del>, etc.
cpMark(copy/colla parte mark) – A verbal or graphical indication to copy musical material written elsewhere.
fingfinger – An individual finger in a fingering indication.
fingGrp(finger group)– A group of individual fingers in a fingering indication.
f(figure) – Single element of a figured bass indication.
harm(harmony) – An indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
refrainRecurring lyrics, especially at the end of each verse or stanza of a poem or song lyrics; a chorus.
verseDivision of a poem or song lyrics, sometimes having a fixed length, meter or rhyme scheme; a stanza.
accid(accidental) – Records a temporary alteration to the pitch of a note.
artic(articulation) – An indication of how to play a note or chord.
caesuraBreak, pause, or interruption in the normal tempo of a composition. Typically indicated by "railroad tracks", i.e., two diagonal slashes.
dir(directive) – An instruction expressed as a combination of text and symbols — such as segno and coda symbols, fermatas over a bar line, etc., typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like tempo or dynam.
dynam(dynamic) – Indication of the volume of a note, phrase, or section of music.
lg(line group) – May be used for any section of text that is organized as a group of lines; however, it is most often used for a group of verse lines functioning as a formal unit, e.g. a stanza, refrain, verse paragraph, etc.
ornamAn element indicating an ornament that is not a mordent, turn, or trill.
syl(syllable) – Individual lyric syllable.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
Declaration
<classSpec ident="att.placement" module="MEI.shared" type="atts">
<desc>Attributes capturing placement information.</desc>
<attList org="group">
<attDef ident="place" usage="opt">
<desc>Captures the placement of the item with respect to the staff with which it is associated.</desc>
<datatype maxOccurs="1" minOccurs="1">
<rng:ref name="data.STAFFREL" />
</datatype>
</attDef>
</attList>
</classSpec>