att.visualOffset.ho

Horizontal offset attributes.
Module
Attributes
ho
ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
Component declarations that are shared between two or more modules.
ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
Available at
divLineRepresents a division (divisio) in neume notation. Divisions indicate short, medium, or long pauses similar to breath marks in modern notation.
graphicIndicates the location of an inline graphic.
anchoredTextContainer for text that is fixed to a particular page location, regardless of changes made to the layout of the measures around it.
arpegIndicates that the notes of a chord are to be performed successively rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
articAn indication of how to play a note or chord.
attaccaAn instruction to begin the next section or movement of a composition without pause.
bendA variation in pitch (often micro-tonal) upwards or downwards during the course of a note.
bracketSpanMarks a sequence of notational events grouped by a bracket.
breathAn indication of a point at which the performer on an instrument requiring breath (including the voice) may breathe.
caesuraBreak, pause, or interruption in the normal tempo of a composition. Typically indicated by "railroad tracks", i.e., two diagonal slashes.
clefIndication of the exact location of a particular note on the staff and, therefore, the other notes as well.
cpMarkA verbal or graphical indication to copy musical material written elsewhere.
curveA curved line that cannot be represented by a more specific element, such as a slur.
dirAn instruction expressed as a combination of text and symbols, typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like tempo, dynam or repeatMark.
dynamIndication of the volume of a note, phrase, or section of music.
fSingle element of a figured bass indication.
fermataAn indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
fingAn individual finger in a fingering indication.
fingGrpA group of individual fingers in a fingering indication.
glissA continuous or sliding movement from one pitch to another, usually indicated by a straight or wavy line.
grpSymA brace or bracket used to group two or more staves of a score or part.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., < and >.
halfmRptA half-measure repeat in any meter.
harmAn indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
harpPedalHarp pedal diagram.
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
lvA "tie-like" indication that a note should ring beyond its written duration.
mNumDesignation, name, or label for a measure, often but not always consisting of digits. Use this element when the n attribute on measure does not adequately capture the appearance or placement of the measure number/label.
mordentAn ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
mRestComplete measure rest in any meter.
octaveAn indication that a passage should be performed one or more octaves above or below its written pitch.
ornamAn element indicating an ornament that is not a mordent, turn, or trill.
pedalPiano pedal mark.
phraseIndication of 1) a "unified melodic idea" or 2) performance technique.
rehIn an orchestral score and its corresponding parts, a mark indicating a convenient point from which to resume rehearsal after a break.
repeatMark An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
restA non-sounding event found in the source being transcribed.
slurIndication of 1) a "unified melodic idea" or 2) performance technique.
spContains an individual speech in a performance text.
stageDirContains any kind of stage direction within a dramatic text or fragment.
sylIndividual lyric syllable.
symbolA reference to a previously defined symbol.
tabDurSymA visual indication of the duration of a tabGrp.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
tieAn indication that two notes of the same pitch form a single note with their combined rhythmic values.
trillRapid alternation of a note with another (usually at the interval of a second above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
accidRecords a temporary alteration to the pitch of a note.
chordA simultaneous sounding of two or more notes in the same layer *with the same duration*.
custosSymbol placed at the end of a line of music to indicate the first note of the next line. Sometimes called a "direct".
dotDot of augmentation or division.
ncSign representing a single pitched event, although the exact pitch may not be known.
ncGrpCollection of one or more neume components.
neumeSign representing one or more musical pitches.
noteA single pitched event.
signifLetSignificantive letter(s).
tabGrpA group of simultaneous tab notes, comparable to a chord in CMN. Rarely, may also contain rests, as in some "German" lute tablatures.
Common Music Notation (CMN) repertoire component declarations.
arpegIndicates that the notes of a chord are to be performed successively rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
attaccaAn instruction to begin the next section or movement of a composition without pause.
bendA variation in pitch (often micro-tonal) upwards or downwards during the course of a note.
bracketSpanMarks a sequence of notational events grouped by a bracket.
breathAn indication of a point at which the performer on an instrument requiring breath (including the voice) may breathe.
fermataAn indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
glissA continuous or sliding movement from one pitch to another, usually indicated by a straight or wavy line.
hairpinIndicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., < and >.
halfmRptA half-measure repeat in any meter.
harpPedalHarp pedal diagram.
lvA "tie-like" indication that a note should ring beyond its written duration.
mNumDesignation, name, or label for a measure, often but not always consisting of digits. Use this element when the n attribute on measure does not adequately capture the appearance or placement of the measure number/label.
mRestComplete measure rest in any meter.
octaveAn indication that a passage should be performed one or more octaves above or below its written pitch.
pedalPiano pedal mark.
rehIn an orchestral score and its corresponding parts, a mark indicating a convenient point from which to resume rehearsal after a break.
repeatMark An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
slurIndication of 1) a "unified melodic idea" or 2) performance technique.
tieAn indication that two notes of the same pitch form a single note with their combined rhythmic values.
CMN ornament component declarations.
mordentAn ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
trillRapid alternation of a note with another (usually at the interval of a second above).
turnAn ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
Dramatic text component declarations.
spContains an individual speech in a performance text.
stageDirContains any kind of stage direction within a dramatic text or fragment.
Editorial and transcriptional component declarations.
cpMarkA verbal or graphical indication to copy musical material written elsewhere.
Figures and tables component declarations.
graphicIndicates the location of an inline graphic.
Fingering component declarations.
fingAn individual finger in a fingering indication.
fingGrpA group of individual fingers in a fingering indication.
Harmony component declarations.
fSingle element of a figured bass indication.
harmAn indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
Neume repertoire component declarations.
divLineRepresents a division (divisio) in neume notation. Divisions indicate short, medium, or long pauses similar to breath marks in modern notation.
episemaEpisema.
hispanTickHispanic tick.
liquescentLiquescent.
ncSign representing a single pitched event, although the exact pitch may not be known.
ncGrpCollection of one or more neume components.
neumeSign representing one or more musical pitches.
oriscusOriscus.
quilismaQuilisma.
signifLetSignificantive letter(s).
strophicusStrophicus.
Component declarations that are shared between two or more modules.
accidRecords a temporary alteration to the pitch of a note.
articAn indication of how to play a note or chord.
caesuraBreak, pause, or interruption in the normal tempo of a composition. Typically indicated by "railroad tracks", i.e., two diagonal slashes.
chordA simultaneous sounding of two or more notes in the same layer *with the same duration*.
clefIndication of the exact location of a particular note on the staff and, therefore, the other notes as well.
custosSymbol placed at the end of a line of music to indicate the first note of the next line. Sometimes called a "direct".
dirAn instruction expressed as a combination of text and symbols, typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like tempo, dynam or repeatMark.
dotDot of augmentation or division.
dynamIndication of the volume of a note, phrase, or section of music.
grpSymA brace or bracket used to group two or more staves of a score or part.
noteA single pitched event.
ornamAn element indicating an ornament that is not a mordent, turn, or trill.
phraseIndication of 1) a "unified melodic idea" or 2) performance technique.
restA non-sounding event found in the source being transcribed.
sylIndividual lyric syllable.
symbolA reference to a previously defined symbol.
tempoText and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
Tablature component declarations.
tabDurSymA visual indication of the duration of a tabGrp.
tabGrpA group of simultaneous tab notes, comparable to a chord in CMN. Rarely, may also contain rests, as in some "German" lute tablatures.
User-defined symbols component declarations.
anchoredTextContainer for text that is fixed to a particular page location, regardless of changes made to the layout of the measures around it.
curveA curved line that cannot be represented by a more specific element, such as a slur.
lineA visual line that cannot be represented by a more specific; i.e., semantic, element.
Declaration
<classSpec ident="att.visualOffset.ho" module="MEI.shared" type="atts">
<desc xml:lang="en">Horizontal offset attributes.</desc>
<attList>
<attDef ident="ho" usage="opt">
<desc xml:lang="en">Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines.</desc>
<datatype>
<rng:ref name="data.MEASUREMENTSIGNED"/>
</datatype>
</attDef>
</attList>
</classSpec>