att.pedal.log

Logical domain attributes.
Module
MEI.cmn
Attributes
@dir, @endid, @func, @layer, @plist, @staff, @startid, @tstamp, @tstamp2
@dir(required)Records the position of the piano damper pedal. Allowed values are: "down" (Depress the pedal.), "up" (Release the pedal.), "half" (Half pedal.), "bounce" (Release then immediately depress the pedal.)
<att.pedal.log>direct children@dir
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
<att.pedal.log>att.startEndId@endid
@func(optional)Indicates the function of the depressed pedal, but not necessarily the text associated with its use. Use the <dir> element for such text. Suggested values are: "sustain" (The sustain pedal, also referred to as the "damper" pedal, allows the piano strings to vibrate sympathetically with the struck strings. It is the right-most and the most frequently used pedal on modern pianos.), "soft" (The soft pedal, sometimes called the "una corda", "piano", or "half-blow" pedal, reduces the volume and modifies the timbre of the piano. On the modern piano, it is the left-most pedal.), "sostenuto" (The sostenuto or tone-sustaining pedal allows notes already undamped to continue to ring while other notes are damped normally; that is, on their release by the fingers. This is usually the center pedal of the modern piano.), "silent" (The silent or practice pedal mutes the volume of the piano so that one may practice quietly. It is sometimes a replacement for the sostenuto pedal, especially on an upright or vertical instrument.)
<att.pedal.log>direct children@func
@layer(optional)Identifies the layer to which a feature applies.
<att.pedal.log>att.controlEventatt.layerIdent@layer
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
<att.pedal.log>att.controlEventatt.plist@plist
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
<att.pedal.log>att.controlEventatt.staffIdent@staff
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
<att.pedal.log>att.startEndIdatt.startId@startid
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
<att.pedal.log>att.controlEventatt.timestamp.log@tstamp
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
<att.pedal.log>att.timestamp2.log@tstamp2
@dir(required)Records the position of the piano damper pedal. Allowed values are: "down" (Depress the pedal.), "up" (Release the pedal.), "half" (Half pedal.), "bounce" (Release then immediately depress the pedal.)
@func(optional)Indicates the function of the depressed pedal, but not necessarily the text associated with its use. Use the <dir> element for such text. Suggested values are: "sustain" (The sustain pedal, also referred to as the "damper" pedal, allows the piano strings to vibrate sympathetically with the struck strings. It is the right-most and the most frequently used pedal on modern pianos.), "soft" (The soft pedal, sometimes called the "una corda", "piano", or "half-blow" pedal, reduces the volume and modifies the timbre of the piano. On the modern piano, it is the left-most pedal.), "sostenuto" (The sostenuto or tone-sustaining pedal allows notes already undamped to continue to ring while other notes are damped normally; that is, on their release by the fingers. This is usually the center pedal of the modern piano.), "silent" (The silent or practice pedal mutes the volume of the piano so that one may practice quietly. It is sometimes a replacement for the sostenuto pedal, especially on an upright or vertical instrument.)
(MEI.shared) Attributes shared by events which rely on other events for their existence. For example, a slur/phrase marking must be drawn between or over a group of notes. The slur is therefore a control event.
(MEI.shared) Attributes that identify the layer to which a feature applies.
@layer(optional)Identifies the layer to which a feature applies.
(MEI.shared) Attributes listing the active participants in a user-defined collection.
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
(MEI.shared) Attributes for identifying the staff or staff group associated with the current feature.
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
(MEI.shared) Attributes that record a time stamp in terms of musical time, , beats[.fractional beat part].
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
(MEI.shared) Attributes recording the identifiers of the first and last elements of a sequence of elements to which the current element is associated.
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
(MEI.shared) Attributes that identify a relative starting point.
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
(MEI.shared) Attributes that record a time stamp for the end of an event in terms of musical time.
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
@dir(required)Records the position of the piano damper pedal. Allowed values are: "down" (Depress the pedal.), "up" (Release the pedal.), "half" (Half pedal.), "bounce" (Release then immediately depress the pedal.)
@func(optional)Indicates the function of the depressed pedal, but not necessarily the text associated with its use. Use the <dir> element for such text. Suggested values are: "sustain" (The sustain pedal, also referred to as the "damper" pedal, allows the piano strings to vibrate sympathetically with the struck strings. It is the right-most and the most frequently used pedal on modern pianos.), "soft" (The soft pedal, sometimes called the "una corda", "piano", or "half-blow" pedal, reduces the volume and modifies the timbre of the piano. On the modern piano, it is the left-most pedal.), "sostenuto" (The sostenuto or tone-sustaining pedal allows notes already undamped to continue to ring while other notes are damped normally; that is, on their release by the fingers. This is usually the center pedal of the modern piano.), "silent" (The silent or practice pedal mutes the volume of the piano so that one may practice quietly. It is sometimes a replacement for the sostenuto pedal, especially on an upright or vertical instrument.)
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
@layer(optional)Identifies the layer to which a feature applies.
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
Available at
<pedal>Piano pedal mark.
<pedal>Piano pedal mark.
Declaration
<classSpec xmlns="http://www.tei-c.org/ns/1.0" rend="add" ident="att.pedal.log" module="MEI.cmn" type="atts">
<desc xml:lang="en">Logical domain attributes.</desc>
<classes>
<memberOf key="att.controlEvent"/>
<memberOf key="att.startEndId"/>
<memberOf key="att.timestamp2.log"/>
</classes>
<attList>
<attDef ident="dir" usage="req">
<gloss xml:lang="en">direction</gloss>
<desc xml:lang="en">Records the position of the piano damper pedal.</desc>
<valList type="closed">
<valItem ident="down">
<desc xml:lang="en">Depress the pedal.</desc>
</valItem>
<valItem ident="up">
<desc xml:lang="en">Release the pedal.</desc>
</valItem>
<valItem ident="half">
<desc xml:lang="en">Half pedal.</desc>
</valItem>
<valItem ident="bounce">
<desc xml:lang="en">Release then immediately depress the pedal.</desc>
</valItem>
</valList>
</attDef>
<attDef ident="func" usage="opt">
<gloss xml:lang="en">function</gloss>
<desc xml:lang="en">Indicates the function of the depressed pedal, but not necessarily the text associated with its use. Use the
<gi scheme="MEI">dir</gi>
element for such text.</desc>
<datatype>
<dataRef name="NMTOKEN"/>
</datatype>
<valList type="semi">
<valItem ident="sustain">
<desc xml:lang="en">The sustain pedal, also referred to as the "damper" pedal, allows the piano strings to vibrate sympathetically with the struck strings. It is the right-most and the most frequently used pedal on modern pianos.</desc>
</valItem>
<valItem ident="soft">
<desc xml:lang="en">The soft pedal, sometimes called the "una corda", "piano", or "half-blow" pedal, reduces the volume and modifies the timbre of the piano. On the modern piano, it is the left-most pedal.</desc>
</valItem>
<valItem ident="sostenuto">
<desc xml:lang="en">The sostenuto or tone-sustaining pedal allows notes already undamped to continue to ring while other notes are damped normally; that is, on their release by the fingers. This is usually the center pedal of the modern piano.</desc>
</valItem>
<valItem ident="silent">
<desc xml:lang="en">The silent or practice pedal mutes the volume of the piano so that one may practice quietly. It is sometimes a replacement for the sostenuto pedal, especially on an upright or vertical instrument.</desc>
</valItem>
</valList>
</attDef>
</attList>
</classSpec>
MEI Version: 6.0-dev+basic(#c874ef5)