<folium>

Module
Attributes
class, copyof, corresp, follows, height, label, n, next, precedes, prev, recto, resp, sameas, synch, type, unit, verso, width, xml:base, xml:id
class(optional)Contains one or more URIs which denote classification terms that apply to the entity bearing this attribute. One or more values from data.URI, separated by spaces.
copyof(optional)Points to an element of which the current element is a copy. Value conforms to data.URI.
corresp(optional)Used to point to other elements that correspond to this one in a generic fashion. One or more values from data.URI, separated by spaces.
follows(optional)points to one or more events in a user-defined collection that are known to be predecessors of the current element. One or more values from data.URI, separated by spaces.
height(optional)Measurement of the vertical dimension of an entity. Value conforms to data.MEASUREMENTUNSIGNED.
label(optional)Captures text to be used to generate a label for the element to which it’s attached, a "tool tip" or prefatory text, for example. Should not be used to record document content. Value is plain text.
n(optional)Provides a number-like designation that indicates an element’s position in a sequence of similar elements. May not contain space characters. Value conforms to data.WORD.
next(optional)Used to point to the next event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
precedes(optional)Points to one or more events in a user-defined collection that are known to be successors of the current element. One or more values from data.URI, separated by spaces.
prev(optional)Points to the previous event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
recto(optional)A reference to a surface element positioned on the recto side of the sheet. Value conforms to data.URI.
resp(optional)Indicates the agent(s) responsible for some aspect of the text’s transcription, editing, or encoding. Its value must point to one or more identifiers declared in the document header. One or more values from data.URI, separated by spaces.
sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element. One or more values from data.URI, separated by spaces.
synch(optional)Points to elements that are synchronous with the current element. One or more values from data.URI, separated by spaces.
type(optional)Designation which characterizes the element in some sense, using any convenient classification scheme or typology that employs single-token labels. One or more values of datatype NMTOKEN, separated by spaces.
unit(optional)Indicates the unit of measurement. Allowed values are: "byte" (Byte.), "char" (Character.), "cm" (Centimeter.), "deg" (Degree.), "in" (Inch.), "issue" (Serial issue.), "ft" (Foot.), "m" (Meter.), "mm" (Millimeter.), "page" (Page.), "pc" (Pica.), "pt" (Point.), "px" (Pixel.), "rad" (Radian.), "record" (Record.), "vol" (Serial volume.), "vu" (MEI virtual unit.)
verso(optional)A reference to a surface element positioned on the verso side of the sheet. Value conforms to data.URI.
width(optional)Measurement of the horizontal dimension of an entity. Value conforms to data.MEASUREMENTUNSIGNED.
xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references. Value conforms to data.URI.
xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value. Value is a valid xml:id.
(MEI.shared) Attributes common to many elements.
(MEI.shared) Attributes that form the basis of the att.common class.
xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references. Value conforms to data.URI.
(MEI.shared) Attributes that uniquely identify an element.
xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value. Value is a valid xml:id.
(MEI.shared)
label(optional)Captures text to be used to generate a label for the element to which it’s attached, a "tool tip" or prefatory text, for example. Should not be used to record document content. Value is plain text.
(MEI.shared) Attributes that specify element-to-element relationships.
copyof(optional)Points to an element of which the current element is a copy. Value conforms to data.URI.
corresp(optional)Used to point to other elements that correspond to this one in a generic fashion. One or more values from data.URI, separated by spaces.
follows(optional)points to one or more events in a user-defined collection that are known to be predecessors of the current element. One or more values from data.URI, separated by spaces.
next(optional)Used to point to the next event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
precedes(optional)Points to one or more events in a user-defined collection that are known to be successors of the current element. One or more values from data.URI, separated by spaces.
prev(optional)Points to the previous event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element. One or more values from data.URI, separated by spaces.
synch(optional)Points to elements that are synchronous with the current element. One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes used to supply a number-like designation for an element.
n(optional)Provides a number-like designation that indicates an element’s position in a sequence of similar elements. May not contain space characters. Value conforms to data.WORD.
(MEI.shared) Attributes capturing information regarding responsibility for some aspect of the text's creation, transcription, editing, or encoding.
resp(optional)Indicates the agent(s) responsible for some aspect of the text’s transcription, editing, or encoding. Its value must point to one or more identifiers declared in the document header. One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes which can be used to classify features.
type(optional)Designation which characterizes the element in some sense, using any convenient classification scheme or typology that employs single-token labels. One or more values of datatype NMTOKEN, separated by spaces.
(MEI.shared) Attributes which can be used to classify features.
class(optional)Contains one or more URIs which denote classification terms that apply to the entity bearing this attribute. One or more values from data.URI, separated by spaces.
(MEI.shared) Attributes that capture the dimensions of an entity.
(MEI.shared) Attributes that describe vertical size.
height(optional)Measurement of the vertical dimension of an entity. Value conforms to data.MEASUREMENTUNSIGNED.
(MEI.shared) Attributes that describe horizontal size.
width(optional)Measurement of the horizontal dimension of an entity. Value conforms to data.MEASUREMENTUNSIGNED.
(MEI.shared) Attributes that record the unit of measurement in which a value is expressed.
unit(optional)Indicates the unit of measurement. Allowed values are: "byte" (Byte.), "char" (Character.), "cm" (Centimeter.), "deg" (Degree.), "in" (Inch.), "issue" (Serial issue.), "ft" (Foot.), "m" (Meter.), "mm" (Millimeter.), "page" (Page.), "pc" (Pica.), "pt" (Point.), "px" (Pixel.), "rad" (Radian.), "record" (Record.), "vol" (Serial volume.), "vu" (MEI virtual unit.)
(MEI.header) Attributes that link a folium element with a element.
recto(optional)A reference to a surface element positioned on the recto side of the sheet. Value conforms to data.URI.
verso(optional)A reference to a surface element positioned on the verso side of the sheet. Value conforms to data.URI.
Metadata header component declarations.
recto(optional)A reference to a surface element positioned on the recto side of the sheet. Value conforms to data.URI.
verso(optional)A reference to a surface element positioned on the verso side of the sheet. Value conforms to data.URI.
Component declarations that are shared between two or more modules.
class(optional)Contains one or more URIs which denote classification terms that apply to the entity bearing this attribute. One or more values from data.URI, separated by spaces.
copyof(optional)Points to an element of which the current element is a copy. Value conforms to data.URI.
corresp(optional)Used to point to other elements that correspond to this one in a generic fashion. One or more values from data.URI, separated by spaces.
follows(optional)points to one or more events in a user-defined collection that are known to be predecessors of the current element. One or more values from data.URI, separated by spaces.
height(optional)Measurement of the vertical dimension of an entity. Value conforms to data.MEASUREMENTUNSIGNED.
label(optional)Captures text to be used to generate a label for the element to which it’s attached, a "tool tip" or prefatory text, for example. Should not be used to record document content. Value is plain text.
n(optional)Provides a number-like designation that indicates an element’s position in a sequence of similar elements. May not contain space characters. Value conforms to data.WORD.
next(optional)Used to point to the next event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
precedes(optional)Points to one or more events in a user-defined collection that are known to be successors of the current element. One or more values from data.URI, separated by spaces.
prev(optional)Points to the previous event(s) in a user-defined collection. One or more values from data.URI, separated by spaces.
resp(optional)Indicates the agent(s) responsible for some aspect of the text’s transcription, editing, or encoding. Its value must point to one or more identifiers declared in the document header. One or more values from data.URI, separated by spaces.
sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element. One or more values from data.URI, separated by spaces.
synch(optional)Points to elements that are synchronous with the current element. One or more values from data.URI, separated by spaces.
type(optional)Designation which characterizes the element in some sense, using any convenient classification scheme or typology that employs single-token labels. One or more values of datatype NMTOKEN, separated by spaces.
unit(optional)Indicates the unit of measurement. Allowed values are: "byte" (Byte.), "char" (Character.), "cm" (Centimeter.), "deg" (Degree.), "in" (Inch.), "issue" (Serial issue.), "ft" (Foot.), "m" (Meter.), "mm" (Millimeter.), "page" (Page.), "pc" (Pica.), "pt" (Point.), "px" (Pixel.), "rad" (Radian.), "record" (Record.), "vol" (Serial volume.), "vu" (MEI virtual unit.)
width(optional)Measurement of the horizontal dimension of an entity. Value conforms to data.MEASUREMENTUNSIGNED.
xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references. Value conforms to data.URI.
xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value. Value is a valid xml:id.
Member of
model.foliumLikeCollects foliumlike elements.
Contained By
(MEI.header) Collects foliumlike elements.
bifoliumDescribes a folded sheet of paper.
cutoutA cutout is a section of a document sheet that has been removed and is now missing.
foliaDescDescribes the order of folia and bifolia making up the text block of a manuscript or print.
patchDescribes a physical writing surface attached to the original document.
Metadata header component declarations.
bifoliumDescribes a folded sheet of paper.
cutoutA cutout is a section of a document sheet that has been removed and is now missing.
foliaDescDescribes the order of folia and bifolia making up the text block of a manuscript or print.
patchDescribes a physical writing surface attached to the original document.
May Contain
(MEI.header) Groups elements dealing with modifications of document pages.
cutoutA cutout is a section of a document sheet that has been removed and is now missing.
patchDescribes a physical writing surface attached to the original document.
Metadata header component declarations.
cutoutA cutout is a section of a document sheet that has been removed and is now missing.
patchDescribes a physical writing surface attached to the original document.
Remarks

When the exact folium setup can't be identified, it is advised to use folium elements only (and not guess about the presence of bifoliums in the document).

Declaration
<elementSpec ident="folium" module="MEI.header">
<desc xml:lang="en">Describes a single leaf of paper.</desc>
<classes>
<memberOf key="att.common"/>
<memberOf key="att.dimensions"/>
<memberOf key="att.measurement"/>
<memberOf key="att.foliumSurfaces"/>
<memberOf key="model.foliumLike"/>
</classes>
<content>
<rng:zeroOrMore>
<rng:ref name="model.paperModLike"/>
</rng:zeroOrMore>
</content>
<remarks xml:lang="en">
<p>When the exact folium setup can't be identified, it is advised to use <gi scheme="MEI">folium</gi> elements only (and not guess about the presence of <gi scheme="MEI">bifolium</gi>s in the document).</p>
</remarks>
</elementSpec>