att.timestamp.ges

Attributes that record a performed (as opposed to notated) time stamp.
Module
MEI.gestural
Attributes
@tstamp.ges, @tstamp.real
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
<att.timestamp.ges>direct children@tstamp.ges
@tstamp.real(optional)Records the onset time in terms of ISO time. Value conforms to data.ISOTIME.
<att.timestamp.ges>direct children@tstamp.real
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
@tstamp.real(optional)Records the onset time in terms of ISO time. Value conforms to data.ISOTIME.
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature. Value conforms to data.BEAT.
@tstamp.real(optional)Records the onset time in terms of ISO time. Value conforms to data.ISOTIME.
Available at
<reh>In an orchestral score and its corresponding parts, a mark indicating a convenient point from which to resume rehearsal after a break.
<annot>Provides a statement explaining the text or indicating the basis for an assertion.
<breath>An indication of a point at which the performer on an instrument requiring breath (including the voice) may breathe.
<caesura>Break, pause, or interruption in the normal tempo of a composition. Typically indicated by "railroad tracks", i.e., two diagonal slashes.
<measure>Unit of musical time consisting of a fixed number of note values of a given type, as determined by the prevailing meter, and delimited in musical notation by bar lines.
<cc>MIDI parameter/control change.
<chan>MIDI channel assignment.
<chanPr>MIDI channel pressure/after touch.
<cue>MIDI cue point.
<hex>Arbitrary MIDI data in hexadecimal form.
<marker>MIDI marker meta-event.
<metaText>MIDI text meta-event.
<noteOff>MIDI note-off event.
<noteOn>MIDI note-on event.
<port>MIDI port.
<prog>MIDI program change.
<seqNum>MIDI sequence number.
<trkName>MIDI track/sequence name.
<vel>MIDI Note-on/off velocity.
<arpeg>Indicates that the notes of a chord are to be performed successively rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
<beamSpan>Alternative element for explicitly encoding beams, particularly those which extend across bar lines.
<bend>A variation in pitch (often micro-tonal) upwards or downwards during the course of a note.
<bracketSpan>Marks a sequence of notational events grouped by a bracket.
<fermata>An indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
<gliss>A continuous or sliding movement from one pitch to another, usually indicated by a straight or wavy line.
<hairpin>Indicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., < and >.
<harpPedal>Harp pedal diagram.
<lv>A "tie-like" indication that a note should ring beyond its written duration.
<octave>An indication that a passage should be performed one or more octaves above or below its written pitch.
<pedal>Piano pedal mark.
<slur>Indication of 1) a "unified melodic idea" or 2) performance technique.
<tie>An indication that two notes of the same pitch form a single note with their combined rhythmic values.
<tupletSpan>Alternative element for encoding tuplets, especially useful for tuplets that extend across bar lines.
<mordent>An ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
<trill>Rapid alternation of a note with another (usually at the interval of a second above).
<turn>An ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
<sp>Contains an individual speech in a performance text.
<stageDir>Contains any kind of stage direction within a dramatic text or fragment.
<cpMark>A verbal or graphical indication to copy musical material written elsewhere.
<metaMark>A graphical or textual statement with additional / explanatory information about the musical text. The textual consequences of this intervention are encoded independently via other means; that is, with elements such as <add>, <del>, etc.
<fing>An individual finger in a fingering indication.
<fingGrp>A group of individual fingers in a fingering indication.
<harm>An indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
<accid>Records a temporary alteration to the pitch of a note.
<artic>An indication of how to play a note or chord.
<attacca>An instruction to begin the next section or movement of a composition without pause.
<dir>An instruction expressed as a combination of text and symbols, typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like <tempo>, <dynam> or <repeatMark>.
<dot>Dot of augmentation or division.
<dynam>Indication of the volume of a note, phrase, or section of music.
<ornam>An element indicating an ornament that is not a mordent, turn, or trill.
<phrase>Indication of 1) a "unified melodic idea" or 2) performance technique.
<repeatMark> An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
<tempo>Text and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
<line>A visual line that cannot be represented by a more specific; i.e., semantic, element.
<clef>Indication of the exact location of a particular note on the staff and, therefore, the other notes as well.
<clefGrp>A set of simultaneously-occurring clefs.
<beam>A container for a series of explicitly beamed events that begins and ends entirely within a measure.
<beatRpt>An indication that material on a preceding beat should be repeated.
<bTrem>A rapid alternation on a single pitch or chord.
<fTrem>A rapid alternation between a pair of notes (or chords or perhaps between a note and a chord) that are (usually) farther apart than a major second.
<graceGrp>A container for a sequence of grace notes.
<halfmRpt>A half-measure repeat in any meter.
<mRest>Complete measure rest in any meter.
<mRpt>An indication that the previous measure should be repeated.
<mRpt2>An indication that the previous two measures should be repeated.
<mSpace>A measure containing only empty space in any meter.
<multiRest>Multiple full measure rests compressed into a single bar, frequently found in performer parts.
<multiRpt>Multiple repeated measures.
<tuplet>A group of notes with "irregular" (sometimes called "irrational") rhythmic values, for example, three notes in the time normally occupied by two or nine in the time of five.
<chord>A simultaneous sounding of two or more notes in the same layer *with the same duration*.
<note>A single pitched event.
<pad>An indication of extra visual space between notational elements.
<rest>A non-sounding event found in the source being transcribed.
<space>A placeholder used to fill an incomplete measure, layer, etc. most often so that the combined duration of the events equals the number of beats in the measure.
<tabGrp>A group of simultaneous tab notes, comparable to a <chord> in CMN. Rarely, may also contain rests, as in some "German" lute tablatures.
<arpeg>Indicates that the notes of a chord are to be performed successively rather than simultaneously, usually from lowest to highest. Sometimes called a "roll".
<attacca>An instruction to begin the next section or movement of a composition without pause.
<bTrem>A rapid alternation on a single pitch or chord.
<beam>A container for a series of explicitly beamed events that begins and ends entirely within a measure.
<beamSpan>Alternative element for explicitly encoding beams, particularly those which extend across bar lines.
<beatRpt>An indication that material on a preceding beat should be repeated.
<bend>A variation in pitch (often micro-tonal) upwards or downwards during the course of a note.
<bracketSpan>Marks a sequence of notational events grouped by a bracket.
<breath>An indication of a point at which the performer on an instrument requiring breath (including the voice) may breathe.
<fTrem>A rapid alternation between a pair of notes (or chords or perhaps between a note and a chord) that are (usually) farther apart than a major second.
<fermata>An indication placed over a note or rest to indicate that it should be held longer than its written value. May also occur over a bar line to indicate the end of a phrase or section. Sometimes called a 'hold' or 'pause'.
<gliss>A continuous or sliding movement from one pitch to another, usually indicated by a straight or wavy line.
<graceGrp>A container for a sequence of grace notes.
<hairpin>Indicates continuous dynamics expressed on the score as wedge-shaped graphics, e.g., < and >.
<halfmRpt>A half-measure repeat in any meter.
<harpPedal>Harp pedal diagram.
<lv>A "tie-like" indication that a note should ring beyond its written duration.
<mRest>Complete measure rest in any meter.
<mRpt>An indication that the previous measure should be repeated.
<mRpt2>An indication that the previous two measures should be repeated.
<mSpace>A measure containing only empty space in any meter.
<measure>Unit of musical time consisting of a fixed number of note values of a given type, as determined by the prevailing meter, and delimited in musical notation by bar lines.
<multiRest>Multiple full measure rests compressed into a single bar, frequently found in performer parts.
<multiRpt>Multiple repeated measures.
<octave>An indication that a passage should be performed one or more octaves above or below its written pitch.
<pedal>Piano pedal mark.
<reh>In an orchestral score and its corresponding parts, a mark indicating a convenient point from which to resume rehearsal after a break.
<repeatMark> An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
<slur>Indication of 1) a "unified melodic idea" or 2) performance technique.
<tie>An indication that two notes of the same pitch form a single note with their combined rhythmic values.
<tuplet>A group of notes with "irregular" (sometimes called "irrational") rhythmic values, for example, three notes in the time normally occupied by two or nine in the time of five.
<tupletSpan>Alternative element for encoding tuplets, especially useful for tuplets that extend across bar lines.
<mordent>An ornament indicating rapid alternation of the main note with a secondary note, usually a step below, but sometimes a step above.
<trill>Rapid alternation of a note with another (usually at the interval of a second above).
<turn>An ornament consisting of four notes — the upper neighbor of the written note, the written note, the lower neighbor, and the written note.
<sp>Contains an individual speech in a performance text.
<stageDir>Contains any kind of stage direction within a dramatic text or fragment.
<cpMark>A verbal or graphical indication to copy musical material written elsewhere.
<metaMark>A graphical or textual statement with additional / explanatory information about the musical text. The textual consequences of this intervention are encoded independently via other means; that is, with elements such as <add>, <del>, etc.
<fing>An individual finger in a fingering indication.
<fingGrp>A group of individual fingers in a fingering indication.
<harm>An indication of harmony, e.g., chord names, tablature grids, harmonic analysis, figured bass.
<cc>MIDI parameter/control change.
<chan>MIDI channel assignment.
<chanPr>MIDI channel pressure/after touch.
<cue>MIDI cue point.
<hex>Arbitrary MIDI data in hexadecimal form.
<marker>MIDI marker meta-event.
<metaText>MIDI text meta-event.
<noteOff>MIDI note-off event.
<noteOn>MIDI note-on event.
<port>MIDI port.
<prog>MIDI program change.
<seqNum>MIDI sequence number.
<trkName>MIDI track/sequence name.
<vel>MIDI Note-on/off velocity.
<accid>Records a temporary alteration to the pitch of a note.
<annot>Provides a statement explaining the text or indicating the basis for an assertion.
<artic>An indication of how to play a note or chord.
<caesura>Break, pause, or interruption in the normal tempo of a composition. Typically indicated by "railroad tracks", i.e., two diagonal slashes.
<chord>A simultaneous sounding of two or more notes in the same layer *with the same duration*.
<clef>Indication of the exact location of a particular note on the staff and, therefore, the other notes as well.
<clefGrp>A set of simultaneously-occurring clefs.
<dir>An instruction expressed as a combination of text and symbols, typically above, below, or between staves, but not on the staff — that is not encoded elsewhere in more specific elements, like <tempo>, <dynam> or <repeatMark>.
<dot>Dot of augmentation or division.
<dynam>Indication of the volume of a note, phrase, or section of music.
<note>A single pitched event.
<ornam>An element indicating an ornament that is not a mordent, turn, or trill.
<pad>An indication of extra visual space between notational elements.
<phrase>Indication of 1) a "unified melodic idea" or 2) performance technique.
<rest>A non-sounding event found in the source being transcribed.
<space>A placeholder used to fill an incomplete measure, layer, etc. most often so that the combined duration of the events equals the number of beats in the measure.
<tempo>Text and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
<tabGrp>A group of simultaneous tab notes, comparable to a <chord> in CMN. Rarely, may also contain rests, as in some "German" lute tablatures.
<line>A visual line that cannot be represented by a more specific; i.e., semantic, element.
Declaration
<classSpec xmlns="http://www.tei-c.org/ns/1.0" rend="add" ident="att.timestamp.ges" module="MEI.gestural" type="atts">
<desc xml:lang="en">Attributes that record a performed (as opposed to notated) time stamp.</desc>
<attList>
<attDef ident="tstamp.ges" usage="opt">
<desc xml:lang="en">Encodes the onset time in terms of musical time,
<abbr>i.e.</abbr>
, beats[.fractional beat part], as expressed in the written time signature.</desc>
<datatype>
<ref name="data.BEAT"/>
</datatype>
</attDef>
<attDef ident="tstamp.real" usage="opt">
<desc xml:lang="en">Records the onset time in terms of ISO time.</desc>
<datatype>
<ref name="data.ISOTIME"/>
</datatype>
</attDef>
</attList>
</classSpec>
MEI Version: 6.0-dev+cmn(#6d754fa)