att.tie.vis

Visual domain attributes. The vo attribute is the vertical offset (from its normal position) of the entire rendered tie. The startho, startvo, endho, and endvo attributes describe the horizontal and vertical offsets of the start and end points of the tie in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Startto and endto describe the start and end points in terms of time; that is, beats.
Module
MEI.visual
Attributes
@color, @curvedir, @endho, @endvo, @ho, @lform, @lsegs, @lwidth, @startho, @startvo, @vo
@color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color' as used in pre-CMN notation. Value conforms to data.COLOR.
<att.tie.vis>att.color@color
@curvedir(optional)Describes a curve with a generic term indicating the direction of curvature. Allowed values are: "above" (Upward curve.), "below" (Downward curve.), "mixed" (A "meandering" curve, both above and below the items it pertains to.)
<att.tie.vis>att.curvature@curvedir
@endho(optional)Records the horizontal adjustment of a feature’s programmatically-determined end point. Value conforms to data.MEASUREMENTSIGNED.
<att.tie.vis>att.visualOffset2att.visualOffset2.ho@endho
@endvo(optional)Records a vertical adjustment of a feature’s programmatically-determined end point. Value conforms to data.MEASUREMENTSIGNED.
<att.tie.vis>att.visualOffset2att.visualOffset2.vo@endvo
@ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
<att.tie.vis>att.visualOffsetatt.visualOffset.ho@ho
@lform(optional)Describes the style of a line. Value conforms to data.LINEFORM.
<att.tie.vis>att.lineRend.base@lform
@lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided, or the number of "peaks" of a wavy line; a pair of space-separated values (minimum and maximum, respectively) provides a range between which a rendering system-supplied value may fall, while a single value indicates a fixed amount of space; that is, the minimum and maximum values are equal. One or two values of datatype a positive integer no smaller than 2, separated by a space.
<att.tie.vis>att.lineRend.base@lsegs
@lwidth(optional)Width of a line. Value conforms to data.LINEWIDTH.
<att.tie.vis>att.lineRend.base@lwidth
@startho(optional)Records the horizontal adjustment of a feature’s programmatically-determined start point. Value conforms to data.MEASUREMENTSIGNED.
<att.tie.vis>att.visualOffset2att.visualOffset2.ho@startho
@startvo(optional)Records a vertical adjustment of a feature’s programmatically-determined start point. Value conforms to data.MEASUREMENTSIGNED.
<att.tie.vis>att.visualOffset2att.visualOffset2.vo@startvo
@vo(optional)Records the vertical adjustment of a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
<att.tie.vis>att.visualOffsetatt.visualOffset.vo@vo
(MEI.shared) Visual color attributes.
@color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color' as used in pre-CMN notation. Value conforms to data.COLOR.
(MEI.shared) Attributes that describe curvature.
@curvedir(optional)Describes a curve with a generic term indicating the direction of curvature. Allowed values are: "above" (Upward curve.), "below" (Downward curve.), "mixed" (A "meandering" curve, both above and below the items it pertains to.)
(MEI.shared) Attributes that record the basic visual rendition of lines.
@lform(optional)Describes the style of a line. Value conforms to data.LINEFORM.
@lwidth(optional)Width of a line. Value conforms to data.LINEWIDTH.
@lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided, or the number of "peaks" of a wavy line; a pair of space-separated values (minimum and maximum, respectively) provides a range between which a rendering system-supplied value may fall, while a single value indicates a fixed amount of space; that is, the minimum and maximum values are equal. One or two values of datatype a positive integer no smaller than 2, separated by a space.
(MEI.shared) Visual offset attributes. Some items may have their location recorded in terms of offsets from their programmatically-determined location. The ho attribute records the horizontal offset while vo records the vertical. The to attribute holds a timestamp offset, the most common use of which is as an alternative to the ho attribute.
(MEI.shared) Horizontal offset attributes.
@ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
(MEI.shared) Vertical offset attributes.
@vo(optional)Records the vertical adjustment of a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
(MEI.shared) Visual offset attributes. Some items may have their location recorded in terms of pairs of offsets from their programmatically-determined location. The startho and endho attributes record the horizontal offsets of the start and end points of the item, respectively. Similarly, the startvo and endvo attributes record the vertical offsets of the start and end points of the item. The startto and endto attributes hold timestamp offsets, the most common use of which is as alternatives to the ho attributes.
(MEI.shared) Horizontal offset requiring a pair of attributes.
@startho(optional)Records the horizontal adjustment of a feature’s programmatically-determined start point. Value conforms to data.MEASUREMENTSIGNED.
@endho(optional)Records the horizontal adjustment of a feature’s programmatically-determined end point. Value conforms to data.MEASUREMENTSIGNED.
(MEI.shared) Vertical offset attributes requiring a pair of attributes.
@startvo(optional)Records a vertical adjustment of a feature’s programmatically-determined start point. Value conforms to data.MEASUREMENTSIGNED.
@endvo(optional)Records a vertical adjustment of a feature’s programmatically-determined end point. Value conforms to data.MEASUREMENTSIGNED.
@color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color' as used in pre-CMN notation. Value conforms to data.COLOR.
@curvedir(optional)Describes a curve with a generic term indicating the direction of curvature. Allowed values are: "above" (Upward curve.), "below" (Downward curve.), "mixed" (A "meandering" curve, both above and below the items it pertains to.)
@endho(optional)Records the horizontal adjustment of a feature’s programmatically-determined end point. Value conforms to data.MEASUREMENTSIGNED.
@endvo(optional)Records a vertical adjustment of a feature’s programmatically-determined end point. Value conforms to data.MEASUREMENTSIGNED.
@ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
@lform(optional)Describes the style of a line. Value conforms to data.LINEFORM.
@lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided, or the number of "peaks" of a wavy line; a pair of space-separated values (minimum and maximum, respectively) provides a range between which a rendering system-supplied value may fall, while a single value indicates a fixed amount of space; that is, the minimum and maximum values are equal. One or two values of datatype a positive integer no smaller than 2, separated by a space.
@lwidth(optional)Width of a line. Value conforms to data.LINEWIDTH.
@startho(optional)Records the horizontal adjustment of a feature’s programmatically-determined start point. Value conforms to data.MEASUREMENTSIGNED.
@startvo(optional)Records a vertical adjustment of a feature’s programmatically-determined start point. Value conforms to data.MEASUREMENTSIGNED.
@vo(optional)Records the vertical adjustment of a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTSIGNED.
Available at
<tie>An indication that two notes of the same pitch form a single note with their combined rhythmic values.
<tie>An indication that two notes of the same pitch form a single note with their combined rhythmic values.
Declaration
<classSpec rend="add" ident="att.tie.vis" module="MEI.visual" type="atts">
<desc xml:lang="en">Visual domain attributes. The vo attribute is the vertical offset (from its normal position) of the entire rendered tie. The startho, startvo, endho, and endvo attributes describe the horizontal and vertical offsets of the start and end points of the tie in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Startto and endto describe the start and end points in terms of time; that is, beats.</desc>
<classes>
<memberOf key="att.color"/>
<memberOf key="att.curvature"/>
<memberOf key="att.lineRend.base"/>
<memberOf key="att.visualOffset"/>
<memberOf key="att.visualOffset2"/>
</classes>
</classSpec>
MEI Version: 6.0-dev+basic(#cd58552)