<folium>

Describes a single leaf of paper.
3.7.1.5 Description of Folia, 3.7.1.5.1 Linking surface elements, 3.7.1.5.2 Specifying page dimensions, 3.7.1.5.3 Patches, 3.7.1.5.4 Cutouts
Module
MEI.header
Attributes
@class, @copyof, @corresp, @follows, @height, @label, @meiversion, @n, @next, @precedes, @prev, @recto, @resp, @sameas, @synch, @type, @unit, @verso, @width, @xml:base, @xml:id
@class(optional)Contains one or more URIs which denote classification terms that apply to the entity bearing this attribute.
<folium>att.commonatt.typedatt.classed@class
@copyof(optional)Points to an element of which the current element is a copy.
<folium>att.commonatt.linking@copyof
@corresp(optional)Used to point to other elements that correspond to this one in a generic fashion.
<folium>att.commonatt.linking@corresp
@follows(optional)points to one or more events in a user-defined collection that are known to be predecessors of the current element.
<folium>att.commonatt.linking@follows
@height(optional)Measurement of the vertical dimension of an entity.
<folium>att.dimensionsatt.height@height
@label(optional)Captures text to be used to generate a label for the element to which it’s attached, a "tool tip" or prefatory text, for example. Should not be used to record document content.
<folium>att.commonatt.labelled@label
@meiversion(recommended)Specifies a generic MEI version label. Allowed values are: "6.0-dev" (Version of MEI), "6.0-dev+anyStart" (Version of MEI All AnyStart customization)
<folium>att.commonatt.basicatt.meiVersion@meiversion
@n(optional)Provides a number-like designation that indicates an element’s position in a sequence of similar elements. May not contain space characters.
<folium>att.commonatt.nNumberLike@n
@next(optional)Used to point to the next event(s) in a user-defined collection.
<folium>att.commonatt.linking@next
@precedes(optional)Points to one or more events in a user-defined collection that are known to be successors of the current element.
<folium>att.commonatt.linking@precedes
@prev(optional)Points to the previous event(s) in a user-defined collection.
<folium>att.commonatt.linking@prev
@recto(optional)A reference to a <surface> element positioned on the recto side of the sheet.
<folium>att.foliumSurfaces@recto
@resp(optional)Indicates the agent(s) responsible for some aspect of the text’s transcription, editing, or encoding. Its value must point to one or more identifiers declared in the document header.
<folium>att.commonatt.responsibility@resp
@sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element.
<folium>att.commonatt.linking@sameas
@synch(optional)Points to elements that are synchronous with the current element.
<folium>att.commonatt.linking@synch
@type(optional)Designation which characterizes the element in some sense, using any convenient classification scheme or typology that employs single-token labels.
<folium>att.commonatt.typed@type
@unit(optional)Indicates the unit of measurement. Suggested values are: "byte" (Byte.), "char" (Character.), "cm" (Centimeter.), "deg" (Degree.), "in" (Inch.), "issue" (Serial issue.), "ft" (Foot.), "m" (Meter.), "mm" (Millimeter.), "page" (Page.), "pc" (Pica.), "pt" (Point.), "px" (Pixel.), "rad" (Radian.), "record" (Record.), "vol" (Serial volume.), "vu" (MEI virtual unit.)
<folium>att.measurement@unit
@verso(optional)A reference to a <surface> element positioned on the verso side of the sheet.
<folium>att.foliumSurfaces@verso
@width(optional)Measurement of the horizontal dimension of an entity.
<folium>att.dimensionsatt.width@width
@xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references.
<folium>att.commonatt.basic@xml:base
@xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value.
<folium>att.commonatt.basicatt.id@xml:id
(MEI.shared) Attributes common to many elements.
(MEI.shared) Attributes that form the basis of the att.common class.
@xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references.
(MEI.shared) Attributes that uniquely identify an element.
@xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value.
(MEI.shared) Attributes that record the version of MEI in use.
@meiversion(recommended)Specifies a generic MEI version label. Allowed values are: "6.0-dev" (Version of MEI), "6.0-dev+anyStart" (Version of MEI All AnyStart customization)
(MEI.shared)
@label(optional)Captures text to be used to generate a label for the element to which it’s attached, a "tool tip" or prefatory text, for example. Should not be used to record document content.
(MEI.shared) Attributes that specify element-to-element relationships.
@copyof(optional)Points to an element of which the current element is a copy.
@corresp(optional)Used to point to other elements that correspond to this one in a generic fashion.
@follows(optional)points to one or more events in a user-defined collection that are known to be predecessors of the current element.
@next(optional)Used to point to the next event(s) in a user-defined collection.
@precedes(optional)Points to one or more events in a user-defined collection that are known to be successors of the current element.
@prev(optional)Points to the previous event(s) in a user-defined collection.
@sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element.
@synch(optional)Points to elements that are synchronous with the current element.
(MEI.shared) Attributes used to supply a number-like designation for an element.
@n(optional)Provides a number-like designation that indicates an element’s position in a sequence of similar elements. May not contain space characters.
(MEI.shared) Attributes capturing information regarding responsibility for some aspect of the text's creation, transcription, editing, or encoding.
@resp(optional)Indicates the agent(s) responsible for some aspect of the text’s transcription, editing, or encoding. Its value must point to one or more identifiers declared in the document header.
(MEI.shared) Attributes which can be used to classify features.
@type(optional)Designation which characterizes the element in some sense, using any convenient classification scheme or typology that employs single-token labels.
(MEI.shared) Attributes which can be used to classify features.
@class(optional)Contains one or more URIs which denote classification terms that apply to the entity bearing this attribute.
(MEI.shared) Attributes that capture the dimensions of an entity.
(MEI.shared) Attributes that describe vertical size.
@height(optional)Measurement of the vertical dimension of an entity.
(MEI.shared) Attributes that describe horizontal size.
@width(optional)Measurement of the horizontal dimension of an entity.
(MEI.shared) Attributes that record the unit of measurement in which a value is expressed.
@unit(optional)Indicates the unit of measurement. Suggested values are: "byte" (Byte.), "char" (Character.), "cm" (Centimeter.), "deg" (Degree.), "in" (Inch.), "issue" (Serial issue.), "ft" (Foot.), "m" (Meter.), "mm" (Millimeter.), "page" (Page.), "pc" (Pica.), "pt" (Point.), "px" (Pixel.), "rad" (Radian.), "record" (Record.), "vol" (Serial volume.), "vu" (MEI virtual unit.)
(MEI.header) Attributes that link a folium element with a element.
@recto(optional)A reference to a <surface> element positioned on the recto side of the sheet.
@verso(optional)A reference to a <surface> element positioned on the verso side of the sheet.
@recto(optional)A reference to a <surface> element positioned on the recto side of the sheet.
@verso(optional)A reference to a <surface> element positioned on the verso side of the sheet.
@class(optional)Contains one or more URIs which denote classification terms that apply to the entity bearing this attribute.
@copyof(optional)Points to an element of which the current element is a copy.
@corresp(optional)Used to point to other elements that correspond to this one in a generic fashion.
@follows(optional)points to one or more events in a user-defined collection that are known to be predecessors of the current element.
@height(optional)Measurement of the vertical dimension of an entity.
@label(optional)Captures text to be used to generate a label for the element to which it’s attached, a "tool tip" or prefatory text, for example. Should not be used to record document content.
@meiversion(recommended)Specifies a generic MEI version label. Allowed values are: "6.0-dev" (Version of MEI), "6.0-dev+anyStart" (Version of MEI All AnyStart customization)
@n(optional)Provides a number-like designation that indicates an element’s position in a sequence of similar elements. May not contain space characters.
@next(optional)Used to point to the next event(s) in a user-defined collection.
@precedes(optional)Points to one or more events in a user-defined collection that are known to be successors of the current element.
@prev(optional)Points to the previous event(s) in a user-defined collection.
@resp(optional)Indicates the agent(s) responsible for some aspect of the text’s transcription, editing, or encoding. Its value must point to one or more identifiers declared in the document header.
@sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element.
@synch(optional)Points to elements that are synchronous with the current element.
@type(optional)Designation which characterizes the element in some sense, using any convenient classification scheme or typology that employs single-token labels.
@unit(optional)Indicates the unit of measurement. Suggested values are: "byte" (Byte.), "char" (Character.), "cm" (Centimeter.), "deg" (Degree.), "in" (Inch.), "issue" (Serial issue.), "ft" (Foot.), "m" (Meter.), "mm" (Millimeter.), "page" (Page.), "pc" (Pica.), "pt" (Point.), "px" (Pixel.), "rad" (Radian.), "record" (Record.), "vol" (Serial volume.), "vu" (MEI virtual unit.)
@width(optional)Measurement of the horizontal dimension of an entity.
@xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references.
@xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value.
Member of
model.foliumLikeCollects foliumlike elements.
Contained By
(MEI.header) Collects foliumlike elements.
<bifolium>Describes a folded sheet of paper.
<cutout>A cutout is a section of a document sheet that has been removed and is now missing.
<foliaDesc>Describes the arrangement of folia and bifolia making up the text block of a manuscript or printed item.
<patch>Describes a physical writing surface attached to the original document.
<bifolium>Describes a folded sheet of paper.
<cutout>A cutout is a section of a document sheet that has been removed and is now missing.
<foliaDesc>Describes the arrangement of folia and bifolia making up the text block of a manuscript or printed item.
<patch>Describes a physical writing surface attached to the original document.
May Contain
(MEI.header) Groups elements dealing with modifications of document pages.
<cutout>A cutout is a section of a document sheet that has been removed and is now missing.
<patch>Describes a physical writing surface attached to the original document.
<cutout>A cutout is a section of a document sheet that has been removed and is now missing.
<patch>Describes a physical writing surface attached to the original document.
Remarks

When the exact folium setup can't be identified, it is advised to use <folium> elements only (and not guess about the presence of <bifolium>s in the document).

Declaration
<elementSpec xmlns="http://www.tei-c.org/ns/1.0" rend="add" ident="folium" module="MEI.header">
<desc xml:lang="en">Describes a single leaf of paper.</desc>
<classes>
<memberOf key="att.common"/>
<memberOf key="att.dimensions"/>
<memberOf key="att.measurement"/>
<memberOf key="att.foliumSurfaces"/>
<memberOf key="model.foliumLike"/>
</classes>
<content>
<classRef key="model.paperModLike" minOccurs="0" maxOccurs="unbounded"/>
</content>
<remarks xml:lang="en">
<p>When the exact folium setup can't be identified, it is advised to use <gi scheme="MEI">folium</gi> elements only (and not guess about the presence of <gi scheme="MEI">bifolium</gi>s in the document).</p>
</remarks>
</elementSpec>
MEI Version: 6.0-dev+anyStart(#021ede6)