att.tempo.log

Logical domain attributes.
Module
MEI.shared
Attributes
@endid, @evaluate, @func, @layer, @mm, @mm.dots, @mm.unit, @part, @partstaff, @plist, @staff, @startid, @tstamp, @tstamp.ges, @tstamp.real, @tstamp2, @when
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
<att.tempo.log>att.startEndId@endid
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
<att.tempo.log>att.controlEventatt.targetEval@evaluate
@func(optional)Records the function of a tempo indication. Allowed values are: "continuous" (Marks a gradual change of tempo, such as "accel." or "rit."), "instantaneous" (Represents a static tempo instruction, such as a textual term like "Adagio", a metronome marking like "♩=70", or a combination of text and metronome indication.), "metricmod" (Captures a change in pulse rate (tempo) and/or pulse grouping (subdivision) in an "equation" of the form [tempo before change] = [tempo after change].), "precedente" (Indicates a change in pulse rate (tempo) and/or pulse grouping (subdivision) in an "equation" of the form [tempo after change] = [tempo before change]. The term "precedente" often appears following the "equation" to distinguish this kind of historical usage from the modern metric modulation form.)
<att.tempo.log>direct children@func
@layer(optional)Identifies the layer to which a feature applies.
<att.tempo.log>att.controlEventatt.layerIdent@layer
@mm(optional)Used to describe tempo in terms of beats (often the meter signature denominator) per minute; e.g., M.M. (Maelzel’s Metronome) markings. Do not confuse this attribute with @midi.bpm or @midi.mspb. In MIDI, a beat is always defined as a quarter note, not the numerator of the time signature or the metronomic indication.
<att.tempo.log>att.mmTempo@mm
@mm.dots(optional)Records the number of augmentation dots required by a dotted metronome unit.
<att.tempo.log>att.mmTempo@mm.dots
@mm.unit(optional)Captures the metronomic unit.
<att.tempo.log>att.mmTempo@mm.unit
@part(optional)Indicates the part in which the current feature should appear. Use 'all' when the feature should occur in every part or 'none' when the feature should not appear in any part.
<att.tempo.log>att.controlEventatt.partIdent@part
@partstaff(optional)Signifies the part staff on which a notated feature occurs. Use 'all' when the feature should occur on every staff.
<att.tempo.log>att.controlEventatt.partIdent@partstaff
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
<att.tempo.log>att.controlEventatt.plist@plist
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
<att.tempo.log>att.controlEventatt.staffIdent@staff
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
<att.tempo.log>att.startEndIdatt.startId@startid
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
<att.tempo.log>att.controlEventatt.timestamp.log@tstamp
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
<att.tempo.log>att.controlEventatt.timestamp.ges@tstamp.ges
@tstamp.real(optional)Records the onset time in terms of ISO time.
<att.tempo.log>att.controlEventatt.timestamp.ges@tstamp.real
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
<att.tempo.log>att.timestamp2.log@tstamp2
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a <when> element elsewhere in the document.
<att.tempo.log>att.controlEventatt.alignment@when
@func(optional)Records the function of a tempo indication. Allowed values are: "continuous" (Marks a gradual change of tempo, such as "accel." or "rit."), "instantaneous" (Represents a static tempo instruction, such as a textual term like "Adagio", a metronome marking like "♩=70", or a combination of text and metronome indication.), "metricmod" (Captures a change in pulse rate (tempo) and/or pulse grouping (subdivision) in an "equation" of the form [tempo before change] = [tempo after change].), "precedente" (Indicates a change in pulse rate (tempo) and/or pulse grouping (subdivision) in an "equation" of the form [tempo after change] = [tempo before change]. The term "precedente" often appears following the "equation" to distinguish this kind of historical usage from the modern metric modulation form.)
(MEI.shared) Attributes shared by events which rely on other events for their existence. For example, a slur/phrase marking must be drawn between or over a group of notes. The slur is therefore a control event.
(MEI.performance) Temporal alignment attributes.
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a <when> element elsewhere in the document.
(MEI.shared) Attributes that identify the layer to which a feature applies.
@layer(optional)Identifies the layer to which a feature applies.
(MEI.shared) Attributes for identifying the part in which the current feature appears.
@part(optional)Indicates the part in which the current feature should appear. Use 'all' when the feature should occur in every part or 'none' when the feature should not appear in any part.
@partstaff(optional)Signifies the part staff on which a notated feature occurs. Use 'all' when the feature should occur on every staff.
(MEI.shared) Attributes listing the active participants in a user-defined collection.
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
(MEI.shared) Attributes for identifying the staff or staff group associated with the current feature.
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
(MEI.shared) Attributes that deal with resolution of values in plist or target attributes.
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
(MEI.shared) Attributes that record a time stamp in terms of musical time, , beats[.fractional beat part].
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
(MEI.gestural) Attributes that record a performed (as opposed to notated) time stamp.
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp.real(optional)Records the onset time in terms of ISO time.
(MEI.shared) Attributes that record tempo in terms of beats per minute.
@mm(optional)Used to describe tempo in terms of beats (often the meter signature denominator) per minute; e.g., M.M. (Maelzel’s Metronome) markings. Do not confuse this attribute with @midi.bpm or @midi.mspb. In MIDI, a beat is always defined as a quarter note, not the numerator of the time signature or the metronomic indication.
@mm.unit(optional)Captures the metronomic unit.
@mm.dots(optional)Records the number of augmentation dots required by a dotted metronome unit.
(MEI.shared) Attributes recording the identifiers of the first and last elements of a sequence of elements to which the current element is associated.
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
(MEI.shared) Attributes that identify a relative starting point.
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
(MEI.shared) Attributes that record a time stamp for the end of an event in terms of musical time.
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp.real(optional)Records the onset time in terms of ISO time.
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a <when> element elsewhere in the document.
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
@func(optional)Records the function of a tempo indication. Allowed values are: "continuous" (Marks a gradual change of tempo, such as "accel." or "rit."), "instantaneous" (Represents a static tempo instruction, such as a textual term like "Adagio", a metronome marking like "♩=70", or a combination of text and metronome indication.), "metricmod" (Captures a change in pulse rate (tempo) and/or pulse grouping (subdivision) in an "equation" of the form [tempo before change] = [tempo after change].), "precedente" (Indicates a change in pulse rate (tempo) and/or pulse grouping (subdivision) in an "equation" of the form [tempo after change] = [tempo before change]. The term "precedente" often appears following the "equation" to distinguish this kind of historical usage from the modern metric modulation form.)
@layer(optional)Identifies the layer to which a feature applies.
@mm(optional)Used to describe tempo in terms of beats (often the meter signature denominator) per minute; e.g., M.M. (Maelzel’s Metronome) markings. Do not confuse this attribute with @midi.bpm or @midi.mspb. In MIDI, a beat is always defined as a quarter note, not the numerator of the time signature or the metronomic indication.
@mm.dots(optional)Records the number of augmentation dots required by a dotted metronome unit.
@mm.unit(optional)Captures the metronomic unit.
@part(optional)Indicates the part in which the current feature should appear. Use 'all' when the feature should occur in every part or 'none' when the feature should not appear in any part.
@partstaff(optional)Signifies the part staff on which a notated feature occurs. Use 'all' when the feature should occur on every staff.
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
Available at
<tempo>Text and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
<tempo>Text and symbols descriptive of tempo, mood, or style, e.g., "allarg.", "a tempo", "cantabile", "Moderato", "♩=60", "Moderato ♩ =60").
Declaration
<classSpec xmlns="http://www.tei-c.org/ns/1.0" rend="add" ident="att.tempo.log" module="MEI.shared" type="atts">
<desc xml:lang="en">Logical domain attributes.</desc>
<classes>
<memberOf key="att.controlEvent"/>
<memberOf key="att.mmTempo"/>
<memberOf key="att.startEndId"/>
<memberOf key="att.timestamp2.log"/>
</classes>
<attList>
<attDef ident="func" usage="opt">
<desc xml:lang="en">Records the function of a tempo indication.</desc>
<valList type="closed">
<valItem ident="continuous">
<desc xml:lang="en">Marks a gradual change of tempo, such as "accel." or "rit."</desc>
</valItem>
<valItem ident="instantaneous">
<desc xml:lang="en">Represents a static tempo instruction, such as a textual term like "Adagio", a metronome marking like "♩=70", or a combination of text and metronome indication.</desc>
</valItem>
<valItem ident="metricmod">
<desc xml:lang="en">Captures a change in pulse rate (tempo) and/or pulse grouping (subdivision) in an "equation" of the form [tempo before change] = [tempo after change].</desc>
</valItem>
<valItem ident="precedente">
<desc xml:lang="en">Indicates a change in pulse rate (tempo) and/or pulse grouping (subdivision) in an "equation" of the form [tempo after change] = [tempo before change]. The term "precedente" often appears following the "equation" to distinguish this kind of historical usage from the modern metric modulation form.</desc>
</valItem>
</valList>
</attDef>
</attList>
</classSpec>
MEI Version: 6.0-dev+anyStart(#021ede6)