att.repeatMark.log

Logical domain attributes.
4.3.11.1 Large-Scale Structural Repetition
Module
MEI.shared
Attributes
@dur, @endid, @evaluate, @func, @layer, @part, @partstaff, @plist, @staff, @startid, @tstamp, @tstamp.ges, @tstamp.real, @tstamp2, @when
@dur(optional)When a duration cannot be represented as a single power-of-two value, multiple space-separated values that add up to the total duration may be used.
<att.repeatMark.log>att.duration.additive@dur
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
<att.repeatMark.log>att.startEndId@endid
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
<att.repeatMark.log>att.controlEventatt.targetEval@evaluate
@func(required)Indicates the function of the mark, usually implying a corresponding form. Allowed values are: "coda" (Coda (SMuFL E048 or Unicode 1D10C).), "segno" (Segno (SMuFL E047 or Unicode 1D10B).), "dalSegno" (Dal segno (SMuFL E045 or Unicode 1D109).), "daCapo" (Da capo (SMuFL E046 or Unicode 1D10A).), "fine" (Fine. (text)), "daCapoAlFine" (D.C. al Fine. (text)), "dalSegnoAlFine" (D.S. al Fine. (text)), "daCapoAlCoda" (D.C. al Coda. (text)), "dalSegnoAlCoda" (D.S. al Coda. (text)), "repeatLeft" (Left repeat barline as a separate symbol disconnected from staff lines (SMuFL E04C or Unicode 1D106)), "repeatRight" (Right repeat barline as a separate symbol disconnected from staff lines (SMuFL E04D or Unicode 1D107)), "repeatRightLeft" (Right and left repeat barline as a separate symbol disconnected from staff lines (SMuFL E042))
<att.repeatMark.log>direct children@func
@layer(optional)Identifies the layer to which a feature applies.
<att.repeatMark.log>att.controlEventatt.layerIdent@layer
@part(optional)Indicates the part in which the current feature should appear. Use 'all' when the feature should occur in every part or 'none' when the feature should not appear in any part.
<att.repeatMark.log>att.controlEventatt.partIdent@part
@partstaff(optional)Signifies the part staff on which a notated feature occurs. Use 'all' when the feature should occur on every staff.
<att.repeatMark.log>att.controlEventatt.partIdent@partstaff
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
<att.repeatMark.log>att.controlEventatt.plist@plist
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
<att.repeatMark.log>att.controlEventatt.staffIdent@staff
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
<att.repeatMark.log>att.startEndIdatt.startId@startid
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
<att.repeatMark.log>att.controlEventatt.timestamp.log@tstamp
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
<att.repeatMark.log>att.controlEventatt.timestamp.ges@tstamp.ges
@tstamp.real(optional)Records the onset time in terms of ISO time.
<att.repeatMark.log>att.controlEventatt.timestamp.ges@tstamp.real
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
<att.repeatMark.log>att.timestamp2.log@tstamp2
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a <when> element elsewhere in the document.
<att.repeatMark.log>att.controlEventatt.alignment@when
@func(required)Indicates the function of the mark, usually implying a corresponding form. Allowed values are: "coda" (Coda (SMuFL E048 or Unicode 1D10C).), "segno" (Segno (SMuFL E047 or Unicode 1D10B).), "dalSegno" (Dal segno (SMuFL E045 or Unicode 1D109).), "daCapo" (Da capo (SMuFL E046 or Unicode 1D10A).), "fine" (Fine. (text)), "daCapoAlFine" (D.C. al Fine. (text)), "dalSegnoAlFine" (D.S. al Fine. (text)), "daCapoAlCoda" (D.C. al Coda. (text)), "dalSegnoAlCoda" (D.S. al Coda. (text)), "repeatLeft" (Left repeat barline as a separate symbol disconnected from staff lines (SMuFL E04C or Unicode 1D106)), "repeatRight" (Right repeat barline as a separate symbol disconnected from staff lines (SMuFL E04D or Unicode 1D107)), "repeatRightLeft" (Right and left repeat barline as a separate symbol disconnected from staff lines (SMuFL E042))
(MEI.shared) Attributes shared by events which rely on other events for their existence. For example, a slur/phrase marking must be drawn between or over a group of notes. The slur is therefore a control event.
(MEI.performance) Temporal alignment attributes.
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a <when> element elsewhere in the document.
(MEI.shared) Attributes that identify the layer to which a feature applies.
@layer(optional)Identifies the layer to which a feature applies.
(MEI.shared) Attributes for identifying the part in which the current feature appears.
@part(optional)Indicates the part in which the current feature should appear. Use 'all' when the feature should occur in every part or 'none' when the feature should not appear in any part.
@partstaff(optional)Signifies the part staff on which a notated feature occurs. Use 'all' when the feature should occur on every staff.
(MEI.shared) Attributes listing the active participants in a user-defined collection.
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
(MEI.shared) Attributes for identifying the staff or staff group associated with the current feature.
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
(MEI.shared) Attributes that deal with resolution of values in plist or target attributes.
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
(MEI.shared) Attributes that record a time stamp in terms of musical time, , beats[.fractional beat part].
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
(MEI.gestural) Attributes that record a performed (as opposed to notated) time stamp.
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp.real(optional)Records the onset time in terms of ISO time.
(MEI.shared) Attributes that permit total duration to be represented by multiple values.
@dur(optional)When a duration cannot be represented as a single power-of-two value, multiple space-separated values that add up to the total duration may be used.
(MEI.shared) Attributes recording the identifiers of the first and last elements of a sequence of elements to which the current element is associated.
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
(MEI.shared) Attributes that identify a relative starting point.
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
(MEI.shared) Attributes that record a time stamp for the end of an event in terms of musical time.
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp.real(optional)Records the onset time in terms of ISO time.
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a <when> element elsewhere in the document.
@dur(optional)When a duration cannot be represented as a single power-of-two value, multiple space-separated values that add up to the total duration may be used.
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
@func(required)Indicates the function of the mark, usually implying a corresponding form. Allowed values are: "coda" (Coda (SMuFL E048 or Unicode 1D10C).), "segno" (Segno (SMuFL E047 or Unicode 1D10B).), "dalSegno" (Dal segno (SMuFL E045 or Unicode 1D109).), "daCapo" (Da capo (SMuFL E046 or Unicode 1D10A).), "fine" (Fine. (text)), "daCapoAlFine" (D.C. al Fine. (text)), "dalSegnoAlFine" (D.S. al Fine. (text)), "daCapoAlCoda" (D.C. al Coda. (text)), "dalSegnoAlCoda" (D.S. al Coda. (text)), "repeatLeft" (Left repeat barline as a separate symbol disconnected from staff lines (SMuFL E04C or Unicode 1D106)), "repeatRight" (Right repeat barline as a separate symbol disconnected from staff lines (SMuFL E04D or Unicode 1D107)), "repeatRightLeft" (Right and left repeat barline as a separate symbol disconnected from staff lines (SMuFL E042))
@layer(optional)Identifies the layer to which a feature applies.
@part(optional)Indicates the part in which the current feature should appear. Use 'all' when the feature should occur in every part or 'none' when the feature should not appear in any part.
@partstaff(optional)Signifies the part staff on which a notated feature occurs. Use 'all' when the feature should occur on every staff.
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
Available at
<repeatMark> An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
<repeatMark> An instruction expressed as a combination of text and symbols – segno and coda – typically above, below, or between staves, but not on the staff.
Declaration
<classSpec xmlns="http://www.tei-c.org/ns/1.0" rend="add" ident="att.repeatMark.log" module="MEI.shared" type="atts">
<desc xml:lang="en">Logical domain attributes.</desc>
<classes>
<memberOf key="att.controlEvent"/>
<memberOf key="att.duration.additive"/>
<memberOf key="att.startEndId"/>
<memberOf key="att.timestamp2.log"/>
</classes>
<attList>
<attDef ident="func" usage="req">
<desc xml:lang="en">Indicates the function of the mark, usually implying a corresponding form.</desc>
<valList type="closed">
<valItem ident="coda">
<desc xml:lang="en">Coda (SMuFL E048 or Unicode 1D10C).</desc>
</valItem>
<valItem ident="segno">
<desc xml:lang="en">Segno (SMuFL E047 or Unicode 1D10B).</desc>
</valItem>
<valItem ident="dalSegno">
<desc xml:lang="en">Dal segno (SMuFL E045 or Unicode 1D109).</desc>
</valItem>
<valItem ident="daCapo">
<desc xml:lang="en">Da capo (SMuFL E046 or Unicode 1D10A).</desc>
</valItem>
<valItem ident="fine">
<desc xml:lang="en">Fine. (text)</desc>
</valItem>
<valItem ident="daCapoAlFine">
<desc xml:lang="en">D.C. al Fine. (text)</desc>
</valItem>
<valItem ident="dalSegnoAlFine">
<desc xml:lang="en">D.S. al Fine. (text)</desc>
</valItem>
<valItem ident="daCapoAlCoda">
<desc xml:lang="en">D.C. al Coda. (text)</desc>
</valItem>
<valItem ident="dalSegnoAlCoda">
<desc xml:lang="en">D.S. al Coda. (text)</desc>
</valItem>
<valItem ident="repeatLeft">
<desc xml:lang="en">Left repeat barline as a separate symbol disconnected from staff lines (SMuFL E04C or Unicode 1D106)</desc>
</valItem>
<valItem ident="repeatRight">
<desc xml:lang="en">Right repeat barline as a separate symbol disconnected from staff lines (SMuFL E04D or Unicode 1D107)</desc>
</valItem>
<valItem ident="repeatRightLeft">
<desc xml:lang="en">Right and left repeat barline as a separate symbol disconnected from staff lines (SMuFL E042)</desc>
</valItem>
</valList>
</attDef>
</attList>
</classSpec>
MEI Version: 6.0-dev+anyStart(#021ede6)