att.octave.log

Logical domain attributes.
Module
MEI.cmn
Attributes
@coll, @dis, @dis.place, @dur, @endid, @evaluate, @layer, @part, @partstaff, @plist, @staff, @startid, @tstamp, @tstamp.ges, @tstamp.real, @tstamp2, @when
@coll(optional)Indicates whether the octave displacement should be performed simultaneously with the written notes, i.e., "coll' ottava". Unlike other octave signs which are indicated by broken lines, coll' ottava typically uses an unbroken line or a series of longer broken lines, ending with a short vertical stroke. See Read, p. 47-48. Allowed values are: "coll" (Coll' ottava (with the octave).)
<att.octave.log>direct children@coll
@dis(optional)Records the amount of octave displacement.
<att.octave.log>att.octaveDisplacement@dis
@dis.place(optional)Records the direction of octave displacement.
<att.octave.log>att.octaveDisplacement@dis.place
@dur(optional)When a duration cannot be represented as a single power-of-two value, multiple space-separated values that add up to the total duration may be used.
<att.octave.log>att.duration.additive@dur
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
<att.octave.log>att.startEndId@endid
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
<att.octave.log>att.controlEventatt.targetEval@evaluate
@layer(optional)Identifies the layer to which a feature applies.
<att.octave.log>att.controlEventatt.layerIdent@layer
@part(optional)Indicates the part in which the current feature should appear. Use 'all' when the feature should occur in every part or 'none' when the feature should not appear in any part.
<att.octave.log>att.controlEventatt.partIdent@part
@partstaff(optional)Signifies the part staff on which a notated feature occurs. Use 'all' when the feature should occur on every staff.
<att.octave.log>att.controlEventatt.partIdent@partstaff
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
<att.octave.log>att.controlEventatt.plist@plist
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
<att.octave.log>att.controlEventatt.staffIdent@staff
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
<att.octave.log>att.startEndIdatt.startId@startid
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
<att.octave.log>att.controlEventatt.timestamp.log@tstamp
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
<att.octave.log>att.controlEventatt.timestamp.ges@tstamp.ges
@tstamp.real(optional)Records the onset time in terms of ISO time.
<att.octave.log>att.controlEventatt.timestamp.ges@tstamp.real
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
<att.octave.log>att.timestamp2.log@tstamp2
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a <when> element elsewhere in the document.
<att.octave.log>att.controlEventatt.alignment@when
@coll(optional)Indicates whether the octave displacement should be performed simultaneously with the written notes, i.e., "coll' ottava". Unlike other octave signs which are indicated by broken lines, coll' ottava typically uses an unbroken line or a series of longer broken lines, ending with a short vertical stroke. See Read, p. 47-48. Allowed values are: "coll" (Coll' ottava (with the octave).)
(MEI.shared) Attributes shared by events which rely on other events for their existence. For example, a slur/phrase marking must be drawn between or over a group of notes. The slur is therefore a control event.
(MEI.performance) Temporal alignment attributes.
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a <when> element elsewhere in the document.
(MEI.shared) Attributes that identify the layer to which a feature applies.
@layer(optional)Identifies the layer to which a feature applies.
(MEI.shared) Attributes for identifying the part in which the current feature appears.
@part(optional)Indicates the part in which the current feature should appear. Use 'all' when the feature should occur in every part or 'none' when the feature should not appear in any part.
@partstaff(optional)Signifies the part staff on which a notated feature occurs. Use 'all' when the feature should occur on every staff.
(MEI.shared) Attributes listing the active participants in a user-defined collection.
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
(MEI.shared) Attributes for identifying the staff or staff group associated with the current feature.
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
(MEI.shared) Attributes that deal with resolution of values in plist or target attributes.
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
(MEI.shared) Attributes that record a time stamp in terms of musical time, , beats[.fractional beat part].
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
(MEI.gestural) Attributes that record a performed (as opposed to notated) time stamp.
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp.real(optional)Records the onset time in terms of ISO time.
(MEI.shared) Attributes that permit total duration to be represented by multiple values.
@dur(optional)When a duration cannot be represented as a single power-of-two value, multiple space-separated values that add up to the total duration may be used.
(MEI.shared) Attributes describing the amount and direction of octave displacement.
@dis(optional)Records the amount of octave displacement.
@dis.place(optional)Records the direction of octave displacement.
(MEI.shared) Attributes recording the identifiers of the first and last elements of a sequence of elements to which the current element is associated.
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
(MEI.shared) Attributes that identify a relative starting point.
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
(MEI.shared) Attributes that record a time stamp for the end of an event in terms of musical time.
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
@coll(optional)Indicates whether the octave displacement should be performed simultaneously with the written notes, i.e., "coll' ottava". Unlike other octave signs which are indicated by broken lines, coll' ottava typically uses an unbroken line or a series of longer broken lines, ending with a short vertical stroke. See Read, p. 47-48. Allowed values are: "coll" (Coll' ottava (with the octave).)
@tstamp.ges(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp.real(optional)Records the onset time in terms of ISO time.
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a <when> element elsewhere in the document.
@dis(optional)Records the amount of octave displacement.
@dis.place(optional)Records the direction of octave displacement.
@dur(optional)When a duration cannot be represented as a single power-of-two value, multiple space-separated values that add up to the total duration may be used.
@endid(optional)Indicates the final element in a sequence of events to which the feature applies.
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)
@layer(optional)Identifies the layer to which a feature applies.
@part(optional)Indicates the part in which the current feature should appear. Use 'all' when the feature should occur in every part or 'none' when the feature should not appear in any part.
@partstaff(optional)Signifies the part staff on which a notated feature occurs. Use 'all' when the feature should occur on every staff.
@plist(optional)When the target attribute is present, plist identifies the active participants; that is, those entities pointed "from", in a relationship with the specified target(s). When the target attribute is not present, it identifies participants in a mutual relationship.
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable.
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies.
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional beat part], as expressed in the written time signature.
@tstamp2(optional)Encodes the ending point of an event, i.e., a count of measures plus a beat location in the ending measure.
Available at
<octave>An indication that a passage should be performed one or more octaves above or below its written pitch.
<octave>An indication that a passage should be performed one or more octaves above or below its written pitch.
Declaration
<classSpec xmlns="http://www.tei-c.org/ns/1.0" rend="add" ident="att.octave.log" module="MEI.cmn" type="atts">
<desc xml:lang="en">Logical domain attributes.</desc>
<classes>
<memberOf key="att.controlEvent"/>
<memberOf key="att.duration.additive"/>
<memberOf key="att.octaveDisplacement"/>
<memberOf key="att.startEndId"/>
<memberOf key="att.timestamp2.log"/>
</classes>
<attList>
<attDef ident="coll" usage="opt">
<desc xml:lang="en">Indicates whether the octave displacement should be performed simultaneously with the written notes,
<abbr>i.e.</abbr>
, "coll' ottava". Unlike other octave signs which are indicated by broken lines, coll' ottava typically uses an unbroken line or a series of longer broken lines, ending with a short vertical stroke. See Read, p. 47-48.</desc>
<valList type="closed">
<valItem ident="coll">
<desc xml:lang="en">Coll' ottava (with the octave).</desc>
</valItem>
</valList>
</attDef>
</attList>
</classSpec>
MEI Version: 6.0-dev+anyStart(#021ede6)