att.curve.vis

Visual domain attributes.
Module
MEI.visual
Attributes
@bezier, @bulge, @color, @curvedir, @endho, @endto, @endvo, @ho, @lform, @lsegs, @lwidth, @startho, @startto, @startvo, @to, @vo, @x, @x2, @y, @y2
@bezier(optional)Records the placement of Bezier control points as a series of pairs of space-separated values; e.g., 19 45 -32 118.
<att.curve.vis>att.curvature@bezier
@bulge(optional)Describes a curve as one or more pairs of values with respect to an imaginary line connecting the starting and ending points of the curve. The first value captures a distance to the left (positive value) or right (negative value) of the line, expressed in virtual units. The second value of each pair represents a point along the line, expressed as a percentage of the line’s length. N.B. An MEI virtual unit (vu) is half the distance between adjacent staff lines where the interline space is measured from the middle of a staff line.
<att.curve.vis>att.curvature@bulge
@color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color' as used in pre-CMN notation.
<att.curve.vis>att.color@color
@curvedir(optional)Describes a curve with a generic term indicating the direction of curvature. Allowed values are: "above" (Upward curve.), "below" (Downward curve.), "mixed" (A "meandering" curve, both above and below the items it pertains to.)
<att.curve.vis>att.curvature@curvedir
@endho(optional)Records the horizontal adjustment of a feature’s programmatically-determined end point.
<att.curve.vis>att.visualOffset2att.visualOffset2.ho@endho
@endto(optional)Records a timestamp adjustment of a feature’s programmatically-determined end point.
<att.curve.vis>att.visualOffset2att.visualOffset2.to@endto
@endvo(optional)Records a vertical adjustment of a feature’s programmatically-determined end point.
<att.curve.vis>att.visualOffset2att.visualOffset2.vo@endvo
@ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines.
<att.curve.vis>att.visualOffsetatt.visualOffset.ho@ho
@lform(optional)Describes the style of a line.
<att.curve.vis>att.lineRend.base@lform
@lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided, or the number of "peaks" of a wavy line; a pair of space-separated values (minimum and maximum, respectively) provides a range between which a rendering system-supplied value may fall, while a single value indicates a fixed amount of space; that is, the minimum and maximum values are equal.
<att.curve.vis>att.lineRend.base@lsegs
@lwidth(optional)Width of a line.
<att.curve.vis>att.lineRend.base@lwidth
@startho(optional)Records the horizontal adjustment of a feature’s programmatically-determined start point.
<att.curve.vis>att.visualOffset2att.visualOffset2.ho@startho
@startto(optional)Records a timestamp adjustment of a feature’s programmatically-determined start point.
<att.curve.vis>att.visualOffset2att.visualOffset2.to@startto
@startvo(optional)Records a vertical adjustment of a feature’s programmatically-determined start point.
<att.curve.vis>att.visualOffset2att.visualOffset2.vo@startvo
@to(optional)Records a timestamp adjustment of a feature’s programmatically-determined location in terms of musical time; that is, beats.
<att.curve.vis>att.visualOffsetatt.visualOffset.to@to
@vo(optional)Records the vertical adjustment of a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines.
<att.curve.vis>att.visualOffsetatt.visualOffset.vo@vo
@x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute.
<att.curve.vis>att.xy@x
@x2(optional)Encodes the optional 2nd x coordinate.
<att.curve.vis>att.xy2@x2
@y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute.
<att.curve.vis>att.xy@y
@y2(optional)Encodes the optional 2nd y coordinate.
<att.curve.vis>att.xy2@y2
(MEI.shared) Visual color attributes.
@color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color' as used in pre-CMN notation.
(MEI.shared) Attributes that describe curvature.
@bezier(optional)Records the placement of Bezier control points as a series of pairs of space-separated values; e.g., 19 45 -32 118.
@bulge(optional)Describes a curve as one or more pairs of values with respect to an imaginary line connecting the starting and ending points of the curve. The first value captures a distance to the left (positive value) or right (negative value) of the line, expressed in virtual units. The second value of each pair represents a point along the line, expressed as a percentage of the line’s length. N.B. An MEI virtual unit (vu) is half the distance between adjacent staff lines where the interline space is measured from the middle of a staff line.
@curvedir(optional)Describes a curve with a generic term indicating the direction of curvature. Allowed values are: "above" (Upward curve.), "below" (Downward curve.), "mixed" (A "meandering" curve, both above and below the items it pertains to.)
(MEI.shared) Attributes that record the basic visual rendition of lines.
@lform(optional)Describes the style of a line.
@lwidth(optional)Width of a line.
@lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided, or the number of "peaks" of a wavy line; a pair of space-separated values (minimum and maximum, respectively) provides a range between which a rendering system-supplied value may fall, while a single value indicates a fixed amount of space; that is, the minimum and maximum values are equal.
(MEI.shared) Visual offset attributes. Some items may have their location recorded in terms of offsets from their programmatically-determined location. The ho attribute records the horizontal offset while vo records the vertical. The to attribute holds a timestamp offset, the most common use of which is as an alternative to the ho attribute.
(MEI.shared) Horizontal offset attributes.
@ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines.
(MEI.shared) Horizontal offset attributes specified in terms of time.
@to(optional)Records a timestamp adjustment of a feature’s programmatically-determined location in terms of musical time; that is, beats.
(MEI.shared) Vertical offset attributes.
@vo(optional)Records the vertical adjustment of a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines.
(MEI.shared) Visual offset attributes. Some items may have their location recorded in terms of pairs of offsets from their programmatically-determined location. The startho and endho attributes record the horizontal offsets of the start and end points of the item, respectively. Similarly, the startvo and endvo attributes record the vertical offsets of the start and end points of the item. The startto and endto attributes hold timestamp offsets, the most common use of which is as alternatives to the ho attributes.
(MEI.shared) Horizontal offset requiring a pair of attributes.
@startho(optional)Records the horizontal adjustment of a feature’s programmatically-determined start point.
@endho(optional)Records the horizontal adjustment of a feature’s programmatically-determined end point.
(MEI.shared) Horizontal offset attributes requiring a pair of attributes specified in terms of time.
@startto(optional)Records a timestamp adjustment of a feature’s programmatically-determined start point.
@endto(optional)Records a timestamp adjustment of a feature’s programmatically-determined end point.
(MEI.shared) Vertical offset attributes requiring a pair of attributes.
@startvo(optional)Records a vertical adjustment of a feature’s programmatically-determined start point.
@endvo(optional)Records a vertical adjustment of a feature’s programmatically-determined end point.
(MEI.shared) Output coordinate attributes. Some elements may have their exact rendered *output* coordinates recorded. x and y attributes indicate where to place the rendered output. Recording the coordinates of a feature in a facsimile requires the use of the facs attribute.
@x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute.
@y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute.
(MEI.shared) Output coordinate attributes. Some elements may need 2 coordinate pairs to record their rendered *output* coordinates. The attributes indicate where to place the rendered output. Recording the coordinates of a feature in a facsimile requires the use of the facs attribute.
@x2(optional)Encodes the optional 2nd x coordinate.
@y2(optional)Encodes the optional 2nd y coordinate.
@bezier(optional)Records the placement of Bezier control points as a series of pairs of space-separated values; e.g., 19 45 -32 118.
@bulge(optional)Describes a curve as one or more pairs of values with respect to an imaginary line connecting the starting and ending points of the curve. The first value captures a distance to the left (positive value) or right (negative value) of the line, expressed in virtual units. The second value of each pair represents a point along the line, expressed as a percentage of the line’s length. N.B. An MEI virtual unit (vu) is half the distance between adjacent staff lines where the interline space is measured from the middle of a staff line.
@color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color' as used in pre-CMN notation.
@curvedir(optional)Describes a curve with a generic term indicating the direction of curvature. Allowed values are: "above" (Upward curve.), "below" (Downward curve.), "mixed" (A "meandering" curve, both above and below the items it pertains to.)
@endho(optional)Records the horizontal adjustment of a feature’s programmatically-determined end point.
@endto(optional)Records a timestamp adjustment of a feature’s programmatically-determined end point.
@endvo(optional)Records a vertical adjustment of a feature’s programmatically-determined end point.
@ho(optional)Records a horizontal adjustment to a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines.
@lform(optional)Describes the style of a line.
@lsegs(optional)Describes the number of segments into which a dashed or dotted line may be divided, or the number of "peaks" of a wavy line; a pair of space-separated values (minimum and maximum, respectively) provides a range between which a rendering system-supplied value may fall, while a single value indicates a fixed amount of space; that is, the minimum and maximum values are equal.
@lwidth(optional)Width of a line.
@startho(optional)Records the horizontal adjustment of a feature’s programmatically-determined start point.
@startto(optional)Records a timestamp adjustment of a feature’s programmatically-determined start point.
@startvo(optional)Records a vertical adjustment of a feature’s programmatically-determined start point.
@to(optional)Records a timestamp adjustment of a feature’s programmatically-determined location in terms of musical time; that is, beats.
@vo(optional)Records the vertical adjustment of a feature’s programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines.
@x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute.
@x2(optional)Encodes the optional 2nd x coordinate.
@y(optional)Encodes a y coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute.
@y2(optional)Encodes the optional 2nd y coordinate.
Available at
<curve>A curved line that cannot be represented by a more specific element, such as a slur.
<curve>A curved line that cannot be represented by a more specific element, such as a slur.
Declaration
<classSpec xmlns="http://www.tei-c.org/ns/1.0" rend="add" ident="att.curve.vis" module="MEI.visual" type="atts">
<desc xml:lang="en">Visual domain attributes.</desc>
<classes>
<memberOf key="att.color"/>
<memberOf key="att.curvature"/>
<memberOf key="att.lineRend.base"/>
<memberOf key="att.visualOffset"/>
<memberOf key="att.visualOffset2"/>
<memberOf key="att.xy"/>
<memberOf key="att.xy2"/>
</classes>
</classSpec>
MEI Version: 6.0-dev+anyStart(#021ede6)