<harpPedal>

(harp pedal) – Harp pedal diagram.
Module MEI.cmn
Attributes
@a(optional)Indicates the pedal setting for the harp's A strings. Allowed values are: "f" (Flat.), "n" (Natural.), "s" (Sharp.)att.harpPedal.log
@altsym(optional)Provides a way of pointing to a user-defined symbol. It must contain an ID of a <symbolDef> element elsewhere in the document. Value conforms to data.URI. att.altsym
@b(optional)Indicates the pedal setting for the harp's B strings. Allowed values are: "f" (Flat.), "n" (Natural.), "s" (Sharp.)att.harpPedal.log
@c(optional)Indicates the pedal setting for the harp's C strings. Allowed values are: "f" (Flat.), "n" (Natural.), "s" (Sharp.)att.harpPedal.log
@color(optional)Used to indicate visual appearance. Do not confuse this with the musical term 'color' as used in pre-CMN notation. Value conforms to data.COLOR. att.color
@copyof(optional)Points to an element of which the current element is a copy. Value conforms to data.URI. att.common.anl
@corresp(optional)Used to point to other elements that correspond to this one in a generic fashion. One or more values from data.URI, separated by spaces. att.common.anl
@d(optional)Indicates the pedal setting for the harp's D strings. Allowed values are: "f" (Flat.), "n" (Natural.), "s" (Sharp.)att.harpPedal.log
@dur.ges(optional)Records performed duration information that differs from the written duration. Its value may be expressed in several forms; that is, ppq (MIDI clicks and MusicXML 'divisions'), Humdrum **recip values, beats, seconds, or mensural duration values. Value conforms to data.DURATION.gestural. att.duration.performed
@e(optional)Indicates the pedal setting for the harp's E strings. Allowed values are: "f" (Flat.), "n" (Natural.), "s" (Sharp.)att.harpPedal.log
@endid(optional)Indicates the final element in a sequence of events to which the feature applies. Value conforms to data.URI. att.startendid
@evaluate(optional)Specifies the intended meaning when a participant in a relationship is itself a pointer. Allowed values are: "all" (If an element pointed to is itself a pointer, then the target of that pointer will be taken, and so on, until an element is found which is not a pointer.), "one" (If an element pointed to is itself a pointer, then its target (whether a pointer or not) is taken as the target of this pointer.), "none" (No further evaluation of targets is carried out beyond that needed to find the element(s) specified in plist or target attribute.)att.targeteval
@f(optional)Indicates the pedal setting for the harp's F strings. Allowed values are: "f" (Flat.), "n" (Natural.), "s" (Sharp.)att.harpPedal.log
@facs(optional)Permits the current element to reference a facsimile surface or image zone which corresponds to it. One or more values from data.URI, separated by spaces. att.facsimile
@fontfam(optional)Contains the name of a font-family. Value conforms to data.FONTFAMILY. att.typography
@fontname(optional)Holds the name of a font. Value conforms to data.FONTNAME. att.typography
@fontsize(optional)Indicates the size of a font expressed in printers' points, i.e., 1/72nd of an inch, relative terms, e.g., "small", "larger", etc., or percentage values relative to "normal" size, e.g., "125%". Value conforms to data.FONTSIZE. att.typography
@fontstyle(optional)Records the style of a font, i.e, italic, oblique, or normal. Value conforms to data.FONTSTYLE. att.typography
@fontweight(optional)Used to indicate bold type. Value conforms to data.FONTWEIGHT. att.typography
@g(optional)Indicates the pedal setting for the harp's G strings. Allowed values are: "f" (Flat.), "n" (Natural.), "s" (Sharp.)att.harpPedal.log
@glyphname(optional)Glyph name. Value of datatype string. att.extsym
@glyphnum(optional)Numeric glyph reference in hexadecimal notation, e.g. "#xE000" or "U+E000". N.B. SMuFL version 1.18 uses the range U+E000 - U+ECBF. Value of datatype a string matching the following regular expression: "(#x|U\+)[A-F0-9]+" . att.extsym
@ho(optional)Records a horizontal adjustment to a feature's programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTREL. att.visualoffset.ho
@label(optional)Provides a name or label for an element. The value may be any string. Value of datatype string. att.commonPart
@layer(optional)Identifies the layer to which a feature applies. One or more values of datatype positiveInteger, separated by spaces. att.layerident
@n(optional)Provides a number-like designation for an element. Value conforms to token. att.common
@next(optional)Used to point to the next event(s) in a user-defined collection. One or more values from data.URI, separated by spaces. att.common.anl
@place(optional)Captures the placement of the item with respect to the staff with which it is associated. Value conforms to data.STAFFREL. att.placement
@plist(optional)Contains a space separated list of references that identify active participants in a collection/relationship, such as notes under a phrase mark; that is, the entities pointed "from". One or more values from data.URI, separated by spaces. att.plist
@prev(optional)Points to the previous event(s) in a user-defined collection. One or more values from data.URI, separated by spaces. att.common.anl
@sameas(optional)Points to an element that is the same as the current element but is not a literal copy of the current element. One or more values from data.URI, separated by spaces. att.common.anl
@staff(optional)Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable. One or more values of datatype positiveInteger, separated by spaces. att.staffident
@startid(optional)Holds a reference to the first element in a sequence of events to which the feature applies. Value conforms to data.URI. att.startid
@subtype(optional)Provide any sub-classification for the element, additional to that given by its type attribute. Value of datatype NMTOKEN. att.typed
@synch(optional)Points to elements that are synchronous with the current element. One or more values from data.URI, separated by spaces. att.common.anl
@to(optional)Records a timestamp adjustment of a feature's programmatically-determined location in terms of musical time; that is, beats. Value conforms to data.TSTAMPOFFSET. att.visualoffset.to
@tstamp(optional)Encodes the onset time in terms of musical time, i.e., beats[.fractional_beat_part]. Value conforms to data.BEAT. att.timestamp.musical
@tstamp.ges(optional)Captures performed onset time in several forms; that is, ppq (MIDI clicks and MusicXML 'divisions'), Humdrum **recip values, beats, seconds, or mensural duration values. Value conforms to data.DURATION.gestural. att.timestamp.performed
@tstamp.real(optional)Used to record the onset time in terms of ISO time. Value conforms to data.ISOTIME. att.timestamp.performed
@type(optional)Characterizes the element in some sense, using any convenient classification scheme or typology. Value of datatype NMTOKEN. att.typed
@vo(optional)Records the vertical adjustment of a feature's programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTREL. att.visualoffset.vo
@when(optional)Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a when element elsewhere in the document. Value conforms to data.URI. att.alignment
@x(optional)Encodes an x coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value of datatype decimal. att.xy
@xml:base(optional)Provides a base URI reference with which applications can resolve relative URI references into absolute URI references. Value conforms to data.URI. att.commonPart
@xml:id(optional)Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value. Value of datatype ID. att.id
@y(optional)Encodes an y coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value of datatype decimal. att.xy
Member of
Contained by
MEI.cmnmeasure
MEI.critapplem rdg
MEI.mensuralligature
MEI.neumessyllable
MEI.sharedlayer
May contain
Empty
Declaration
<classes>
<memberOf key="att.common"/>
<memberOf key="att.facsimile"/>
<memberOf key="att.harpPedal.log"/>
<memberOf key="att.harpPedal.vis"/>
<memberOf key="att.harpPedal.ges"/>
<memberOf key="att.harpPedal.anl"/>
<memberOf key="att.typed"/>
<memberOf key="model.controleventLike.cmn"/>
</classes>
<content>
<rng:empty/>
</content>
Remarks

The starting point of the harp pedal diagram may be indicated by either a tstamp, tstamp.ges, tstamp.real or startid attribute. It is a semantic error not to specify a starting point attribute.

Constraint
Must have one of the attributes: startid, tstamp, tstamp.ges or tstamp.real.
<sch:rule context="mei:harpPedal">
<sch:assert test="@startid or @tstamp or @tstamp.ges or @tstamp.real">Must have one of the attributes: startid, tstamp, tstamp.ges or tstamp.real.</sch:assert>
</sch:rule>