<mRest>

<mRest> (measure rest) – Complete measure rest in any meter.
Module MEI.cmn
Attributes
@altsym (optional) Provides a way of pointing to a user-defined symbol. It must contain an ID of a <symbolDef> element elsewhere in the document. Value conforms to data.URI . att.altsym
@copyof (optional) Points to an element of which the current element is a copy. Value conforms to data.URI . att.common.anl
@corresp (optional) Used to point to other elements that correspond to this one in a generic fashion. One or more values from data.URI , separated by spaces. att.common.anl
@cutout (optional) "Cut-out" style indicated for this measure. Allowed values are: " cutout" (The staff lines should not be drawn.) att.cutout
@dur (optional) Records the duration of a feature using the relative durational values provided by the data.DURATION datatype. Value conforms to data.DURATION . att.duration.musical
@dur.ges (optional) Records performed duration information that differs from the written duration. Its value may be expressed in several forms; that is, ppq (MIDI clicks and MusicXML 'divisions'), Humdrum **recip values, beats, seconds, or mensural duration values. Value conforms to data.DURATION.gestural . att.duration.performed
@facs (optional) Permits the current element to reference a facsimile surface or image zone which corresponds to it. One or more values from data.URI , separated by spaces. att.facsimile
@fermata (optional) Indicates the attachment of a fermata to this element. If visual information about the fermata needs to be recorded, then a <fermata> element should be employed instead. Value conforms to data.PLACE . att.fermatapresent
@fontfam (optional) Contains the name of a font-family. Value conforms to data.FONTFAMILY . att.typography
@fontname (optional) Holds the name of a font. Value conforms to data.FONTNAME . att.typography
@fontsize (optional) Indicates the size of a font expressed in printers' points, i.e., 1/72nd of an inch, relative terms, e.g., "small", "larger", etc., or percentage values relative to "normal" size, e.g., "125%". Value conforms to data.FONTSIZE . att.typography
@fontstyle (optional) Records the style of a font, i.e, italic, oblique, or normal. Value conforms to data.FONTSTYLE . att.typography
@fontweight (optional) Used to indicate bold type. Value conforms to data.FONTWEIGHT . att.typography
@glyphname (optional) Glyph name. Value of datatype string. att.extsym
@glyphnum (optional) Numeric glyph reference in hexadecimal notation, e.g. "#xE000" or "U+E000". N.B. SMuFL version 1.18 uses the range U+E000 - U+ECBF. Value of datatype a string matching the following regular expression: "(#x|U\+)[A-F0-9]+" . att.extsym
@ho (optional) Records a horizontal adjustment to a feature's programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTREL . att.visualoffset.ho
@instr (optional) Provides a way of pointing to a MIDI instrument definition. It must contain the ID of an <instrDef> element elsewhere in the document. Value conforms to data.URI . att.instrumentident
@label (optional) Provides a name or label for an element. The value may be any string. Value of datatype string. att.commonPart
@layer (optional) Identifies the layer to which a feature applies. One or more values of datatype positiveInteger, separated by spaces. att.layerident
@loc (optional) Holds the staff location of the feature. Value conforms to data.STAFFLOC . att.staffloc
@n (optional) Provides a number-like designation for an element. Value conforms to token . att.common
@next (optional) Used to point to the next event(s) in a user-defined collection. One or more values from data.URI , separated by spaces. att.common.anl
@oloc (optional) Records staff location in terms of written octave. Value conforms to data.OCTAVE . att.staffloc.pitched
@ploc (optional) Captures staff location in terms of written pitch name. Value conforms to data.PITCHNAME . att.staffloc.pitched
@prev (optional) Points to the previous event(s) in a user-defined collection. One or more values from data.URI , separated by spaces. att.common.anl
@sameas (optional) Points to an element that is the same as the current element but is not a literal copy of the current element. One or more values from data.URI , separated by spaces. att.common.anl
@size (optional) Describes the relative size of a feature. Value conforms to data.SIZE . att.relativesize
@staff (optional) Signifies the staff on which a notated event occurs or to which a control event applies. Mandatory when applicable. One or more values of datatype positiveInteger, separated by spaces. att.staffident
@synch (optional) Points to elements that are synchronous with the current element. One or more values from data.URI , separated by spaces. att.common.anl
@to (optional) Records a timestamp adjustment of a feature's programmatically-determined location in terms of musical time; that is, beats. Value conforms to data.TSTAMPOFFSET . att.visualoffset.to
@tstamp (optional) Encodes the onset time in terms of musical time, i.e., beats[.fractional_beat_part]. Value conforms to data.BEAT . att.timestamp.musical
@tstamp.ges (optional) Captures performed onset time in several forms; that is, ppq (MIDI clicks and MusicXML 'divisions'), Humdrum **recip values, beats, seconds, or mensural duration values. Value conforms to data.DURATION.gestural . att.timestamp.performed
@tstamp.real (optional) Used to record the onset time in terms of ISO time. Value conforms to data.ISOTIME . att.timestamp.performed
@visible (optional) Indicates if a feature should be rendered when the notation is presented graphically or sounded when it is presented in an aural form. Value conforms to data.BOOLEAN . att.visibility
@vo (optional) Records the vertical adjustment of a feature's programmatically-determined location in terms of staff interline distance; that is, in units of 1/2 the distance between adjacent staff lines. Value conforms to data.MEASUREMENTREL . att.visualoffset.vo
@when (optional) Indicates the point of occurrence of this feature along a time line. Its value must be the ID of a when element elsewhere in the document. Value conforms to data.URI . att.alignment
@x (optional) Encodes an x coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value of datatype decimal. att.xy
@xml:base (optional) Provides a base URI reference with which applications can resolve relative URI references into absolute URI references. Value conforms to data.URI . att.commonPart
@xml:id (optional) Regularizes the naming of an element and thus facilitates building links between it and other resources. Each id attribute within a document must have a unique value. Value of datatype ID. att.id
@y (optional) Encodes an y coordinate for a feature in an output coordinate system. When it is necessary to record the placement of a feature in a facsimile image, use the facs attribute. Value of datatype decimal. att.xy
Member of
Contained by
MEI.critapp lem rdg
MEI.mensural ligature
MEI.shared layer
May contain
Empty
Declaration
<classes>
<memberOf key= " att.common" />
<memberOf key= " att.facsimile" />
<memberOf key= " att.mRest.log" />
<memberOf key= " att.mRest.vis" />
<memberOf key= " att.mRest.ges" />
<memberOf key= " att.mRest.anl" />
<memberOf key= " model.eventLike.measureFilling" />
</classes>
<content>
<rng:empty/>
</content>
Remarks

Automatically-generated numbering of consecutive measures of rest may be controlled via the multi.number attribute on the scoreDef or staffDef elements.

MEI Guidelines Version 3.0.0

MEI Elements